Hikvision DS-2CE55A2P-VFIR3 Handleiding

Hikvision Bewakingscamera DS-2CE55A2P-VFIR3

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2CE55A2P-VFIR3 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Turret Camera
User Manual
www.hikvision.com
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory Information
FCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
0200001030603
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purcha se of equ ivalent new equipment,
or disp ose of it at d esignated col lecti on points.
For more inf ormation see: www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery
that cannot be disposed of as
unsorted municipal waste in the
European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution.
low image distortion and low noise etc which.
makes it suitable for surveillance system and
image processing system.
High-performance sensor and high resolution
bring high-quality image
IR LED enables day night surveillance
Day/night auto switch
ATW brings high color rendition
Auto electronic shutter control to adapt to the
different surveillance environments
Auto gain control, adaptive brightness
High SNR brings high-quality image
Ingress protection: IP66
Type camera doesnt support IR and IP.
DS-2CE5512/5582/55A2/55C2P N IRP don’t
support IP66.
,
, ,
/
Notes:
66
( )-
1 Introduction
1.1 Product Features
1.2 Overview
2 Installation
Before you start:
Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
Please make sure that all the related equipment
is power-off during the installation.
Check the specification of the products for the
. installation environment
Check whether the power supply is matched
with your AC outlet to avoid damage.
If the product does not function properly, please
contact your dealer or the nearest service
center. Do not disassemble the camera for
repair or maintenance by yourself.
Please make sure that the wall or the ceiling is
strong enough to withstand 3 times the weight
of the camera.
UD.6L0201D1091A01
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, retur n
this product to your local suppli er
TYPE
I
Video Cable
Power Cable
Camera
Adjustable Screw
Black Liner
Lower
Dome
Please refer to the product specification for
camera parameters and functions.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC ,
the RoHS Directive 2011/65/EU.
Power
Cable
TYPE
III
TYPE
IV
TYPE
II
TYPE
V
Mounting
Base
Power
Cable
Trim Ring
Enclosure
Video
Cable
Camera
Power
Cable
Mounting Base
Enclosure
Camera
Video
Cable
Enclosure
Mounting
Base
Trim Ring
Video
Cable
Camera
Mounting
Base
Enclosure Zoom Focus &
Lock
Screw
Video Cable
Power
Cable
Camera
Type Model
IDS-2CE5582P(N),
DS-2CE55C2P(N)
DS-2CE5512P(N),
DS-2CE55A2P(N),
DS-2CE55A2P(N)-IRP, DS-2CE55C2P(N)-IRP
DS-2CE5512P(N)-IR,DS-2CE5582P(N)-IR,
DS-2CE55A2P(N)-IR,DS-2CE55C2P(N)-IR
DS-2CE5512P(N)-IRP, DS-2CE5582P(N)-IRP
DS-2CE5682P(N)-IT1 DS-2CE5682P(N)-IT3,
DS-2CE56A2P(N)-IT3,DS-2CE56C2P(N)-IT3
II
III
IV
DS-2CE5582P(N)-VFIR3,
DS-2CE55C2P(N)-VFIR3
DS-2CE55A2P(N)-VFIR3
V
DS-2CE5582P(N)-IRM,
DS-2CE55C2P(N)-IRM
DS-2CE55A2P(N)-IRM,
1.Hold the mounting base, and rotate the lower
dome counterclockwise to disassemble the
lower dome and the black liner.
2.Drill the screw holes and the cable hole the
ceiling according to the supplied drill template.
on
Steps:
Figure 2-1 The Disassembling
2.1 Ceiling Mounting for Type I
Camera
3.Route the cables to the cable hole and
the corresponding power cable and video cable.
4.Fix the mounting base to the ceiling with
the supplied screws.
connect
6.Fit the black liner back to the camera.
7.Install the lower dome back to the camera and
rotate it clockwise to get it secured.
Figure 2-2 3-axis Adjustment
5.Adjust the Lens
1).Loosen the tilting lock screws besides the
lens.
2).Adjust the camera from the pan angle
( ); tilt angle (0 ~ 90 ), and rotate
the lens(0 ~355 ) to get the optimum angle.
3).Tighten the tilting lock screws.
0 ~ 355° ° ° °
° °
Steps:
1.Drill the screw holes and the cable hole
according to the drill template.
Figure 2-5 Fix the Mounting Base
2.Fix the mounting base to the ceiling with the
supplied screws.
connect
3.Route the cables to the cable hole and
the corresponding power cable and video cable.
4.Secure the camera to the mounting base.
5.Fix the enclosure to camera to complet the
installation..
Figure 2-6 Fix the Components
Figure 2-4 Drill Template of Type CameraⅡ/
Camera
2.2 Ceiling Mounting for Type II/ III
6.Adjust the surveillance angle according to the
figure below.
7.Rotate the trim ring clockwise to secure the
camera.
Figure 2-12 The Lock Screw
Figure 2-7 3-axis Adjustment
2.3 Ceiling Mounting for Type IV
Camera
2.Loosen the lock screw to disassemble the
camera from the mounting base.
Steps:
1.Drill the screws holes and the cable hole on the
ceiling according to the supplied drill template.
ix3.F the mounting base to the ceiling.
4.Route the cables to the cable hole and connect
the corresponding cables.
5.Secure the camera to the mounting base by
tightening the lock screw.
6.Adjust the camera according to the figure
below to get an optimum angle.
Figure 2-13 3-axis Adjustment
7.Use the screwdriver to adjust the ZOOM screw
and the FOCUS screw until you get the
optimum image.
Figure 2-14 Zoom and Focus Adjustment
Figure 2-3 Complete the Installation
Steps:
1.Drill the screw holes and the cable hole
according to the drill template.
Figure 2-8 The Drill Template of Type IV Camera
2.Fix the mounting base to the ceiling with the
supplied screws.
Figure 2-9 Fix the Mounting Base and the Camera
6.Adjust the camera according to the figure below
to get an optimum angle.
3.Route the cables to the cable hole and
corresponding power cable and video cable.
4.Secure the camera to the mounting base.
5.Fix the enclosure to camera to complete the
installation.
connect
Figure 2-10 3-axis Adjustment
2.4 Ceiling Mounting for Type V
Camera
Figure 2-11 The Drill Template of Type V Camera
355°
355°
0-90°
P ~ an 360°
Tilt ~ 75°
Rotation ~ 360°
Template
Screw Hole Screw Hole
Screw Hole
Hole
Ceiling Mounting
Hole
Screw Hole
Drilling Template
Screw Hole
Screw Hole
Screw Hole
360°
360°
0 ~ 75°
360°
360°
0 ~ 7


Product specificaties

Merk: Hikvision
Categorie: Bewakingscamera
Model: DS-2CE55A2P-VFIR3
Kleur van het product: Wit
Gewicht: 800 g
Breedte: 123.9 mm
Diepte: 134.2 mm
Soort: CCTV-bewakingscamera
Internationale veiligheidscode (IP): IP66
Vormfactor: Dome
Ondersteuning voor plaatsing: Buiten
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Nee
Maximum resolutie: 976 x 496 Pixels
Stroomuitvoer (volt): +12V
Minimale belichting: 0.1 Lux
Nachtvisie: Ja
LED-type: IR
Brandpuntbereik: - mm
Vermogensverbruik (max): 5 W
Formaat analoog signaal: PAL
Omvang optische sensor: 1/3 "
Type beeldsensor: DIS
Camera sluitertijd: 1/50 - 1/100000 s
Composiet video-uitgang: 1
Signaal/ruis-verhouding: 62 dB
Power over Ethernet (PoE): Nee
Scherpstellen: 1.4
Draaihoek: 360 °
Aantal TV lijnen: 700
Pan bereik: 0 - 360 °
Dag/nacht modus: Ja
Nachtkijker afstand: 40 m
Wifi: Nee
Bedrijfstemperatuur (T-T): -40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent
Bereik kantelhoek: 0 - 75 °
Kijkhoek lens, horizontaal: 80 °
Kijkhoek lens, verticaal: 27.2 °

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-2CE55A2P-VFIR3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Hikvision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera