Hikvision DS-2CE16D7T-IT1 Handleiding

Hikvision Bewakingscamera DS-2CE16D7T-IT1

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2CE16D7T-IT1 (9 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
TURBO HD
D7T Series Bullet Camera
User Manual
UD00387B
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer.
This manual applies to the models below:
Type
Model
Type I
Camera
DS-2CE16D(F) - 7T IT
Type II
Camera
DS-2CE16D(F) -IT1 7T
DS-2CE16D(F) -IT3 7T
DS-2CE16D(F) -IT5 7T
This manual may contain several technical incorrect
places or prinng errors, and the content is subject to
change without noce. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
0100001060112
Privacy Noce
Surveillance laws vary by jurisdicon. Check all relevant
laws in your jurisdicon before using all this product for
surveillance purpose to ensure that your use of this
product conforms.
Regulatory Informaon
FCC Informaon
FCC compliance: This equipment has been tested and
found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to
radio communicaons. Operaon of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcve
2006/95/EC, the EMC Direcve 2004/108/EC.
2002/96/EC (WEEE direcve): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more
informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This
product contains a baery that cannot be
disposed of as unsorted municipal waste in
the European Union. See the product
documentation for specic battery
informaon. The battery is marked with
this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a
designated collecon point. For more informaon see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
1 Introducon
1.1 Product Features
This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resoluon, low distoron, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:
High performance CMOS sensor and high resoluon
bring high-quality image;
Low illuminaon, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
IR cut lter with auto switch;
OSD menu, parameters are congurable;
Auto white balance and internal synchronization;
SMART IR mode;
True WDR;
Advanced 3-axis design meets dierent installation
requirements;
1.2 Overview
This manual applies to two types of bullet cameras.
The overviews of each type are shown in the gures below,
please refer to the actual sample.
1.2.1 Overview of Type I Camera
Main Body
Photoconducve Resistance
Lens
Bracket
Video Cable
DC 12V
Power Cord
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type Camera II
Camera
Bracket
Video Cable
DC V Power Cord 12
Lens
Figure 1-2 Overview of Type II Camera


Product specificaties

Merk: Hikvision
Categorie: Bewakingscamera
Model: DS-2CE16D7T-IT1
Kleur van het product: Wit
Gewicht: 680 g
Breedte: 86.7 mm
Diepte: 226 mm
Hoogte: 81.6 mm
Soort: CCTV-bewakingscamera
Internationale veiligheidscode (IP): IP66
Vormfactor: Rond
Ondersteuning voor plaatsing: Buiten
Connectiviteitstechnologie: Bedraad
Montagewijze: Plafond/muur
Maximum resolutie: 1928 x 1088 Pixels
Totaal aantal megapixels: 2 MP
Type stroombron: DC
Stroomuitvoer (volt): 12
Minimale belichting: 0.01 Lux
Field of view (FOV) hoek: 82.2 °
Aantal cameras: 1
Vaste focale lengte: 3.6 mm
Vermogensverbruik (max): 5 W
Formaat analoog signaal: NTSC, PAL
Volledige HD: Ja
Type beeldsensor: CMOS
Camera sluitertijd: 1/25 - 1/50000 s
Witbalans: Auto
Ondersteunde grafische resoluties: 1920 x 1080 (HD 1080)
Ruisonderdrukking: Ja
Maximaal 30 frames per seconde: 25 fps
Signaal/ruis-verhouding: 62 dB
Ondersteunde talen: CHI (SIMPL), CHI (TR), ENG
Draaihoek: 360 °
Pan bereik: 0 - 360 °
Dag/nacht modus: Ja
Weerbestendig: Ja
Infrarood (IR)-afsluitingsfilter: Ja
Achtergrondverlichting compensatie: Ja
Wide Dynamic Range (WDR): Ja
Bedrijfstemperatuur (T-T): -40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent
Bereik kantelhoek: 0 - 90 °
Draaien & spiegelen: Ja
Lens mount interface: M12
Smart IR: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-2CE16D7T-IT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Hikvision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera