Hikoki B16RM Handleiding
Hikoki
Boormachine
B16RM
Bekijk gratis de handleiding van Hikoki B16RM (28 pagina’s), behorend tot de categorie Boormachine. Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.5 sterren uit 21.5 reviews. Heb je een vraag over Hikoki B16RM of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/28
Model Drill Press
B 16RM
Hitachi Koki
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
before operating the power tool. Please keep this manual available for others before they use the power
tool.
WARNING
N136
– 2 –
SECTION PAGE
Product Specifications ..................................................................................................................... 3
Power Tool Safety............................................................................................................................ 4
Drill Press Safety.............................................................................................................................. 5
Electrical Requirements And Safety................................................................................................. 6
Accessories and Attachments ......................................................................................................... 7
Tools Needed For Assembly............................................................................................................ 7
Carton Contents .............................................................................................................................. 7
Know Your Drill Press. ..................................................................................................................... 9
Glossary of Terms ............................................................................................................................ 10
Assembly and Adjustments ............................................................................................................. 11
Operation......................................................................................................................................... 15
Maintenance .................................................................................................................................... 20
Troubleshooting Guide .................................................................................................................... 21
Parts List.......................................................................................................................................... 22
CONTENTS
English
– 3 –
English
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains
chemicals (known to the State of California) to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
● Lead based paints
● Crystalline silica from bricks, cement and other masonry products
● Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such
as dust masks that are specially designed to filter out microscopic particles.
PRODUCT SPECIFICATIONS
Swing ....................................... 15” (380mm) Table Size ................................. 13-15/64” x 13-15/64”
Chuck Size................................ 5/8” (16mm) (336mm x 336mm)
No Load Speed......................... 12 Speeds Table Tilt .................................... 45° Right or Left
210-2,580/min Spindle Travel............................ 3-11/32” (85mm)
Voltage ..................................... 220-240V / 50Hz Throat......................................... 7-1/2” (190.5mm)
Watts ........................................ 750W Base Size .................................. 11” x 20-3/8”
Amps ........................................ 3.6A (279.4mm x 518mm)
Built-in Light.............................. 60 Watt (Maximum) Height......................................... 63-11/16” (1,617.5mm)
(Bulb not included) Net Weight... .............................. 165 lbs (75kg)
WARNING
To avoid electrical hazards, fire hazards or damage to the drill press, use proper circuit protection.
This drill press is wired at the factory for 220-240 Volt operation. It must be connected to a 220-240 Volt / 3.6
Ampere time delay fuse or circuit breaker. To avoid shock or fire, replace power cord immediately if it is worn,
cut or damaged in any way.
Before using your drill press, it is critical that you read and understand these safety rules. Failure to follow
these rules could result in serious injury to you or damage to the drill press.
Product specificaties
| Merk: | Hikoki |
| Categorie: | Boormachine |
| Model: | B16RM |
Heb je hulp nodig?
Als je hulp nodig hebt met Hikoki B16RM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Hikoki
7 December 2024
7 December 2024
7 December 2024
26 December 2023
29 Augustus 2023
29 Augustus 2023
29 Augustus 2023
29 Augustus 2023
29 Augustus 2023
29 Augustus 2023
Handleiding Boormachine
- Ergotools Pattfield
- Powerblade
- Black And Decker
- Basetech
- Trotec
- Wolfcraft
- Profitech
- Stomer
- Bavaria
- Meister Craft
- Duro Pro
- Malmbergs
- Rok
- Truper
- Economy
Nieuwste handleidingen voor Boormachine
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
7 Juni 2025
7 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025