High One HI3227HD-GM Handleiding

High One Televisie HI3227HD-GM

Bekijk gratis de handleiding van High One HI3227HD-GM (2 pagina’s), behorend tot de categorie Televisie. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.0 sterren uit 3.5 reviews. Heb je een vraag over High One HI3227HD-GM of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
TELEVISION SET X 1
REMOTE CONTROL X 1
STAND X 2
WHAT'S IN THE BOX
SCREWS X 2
QUICK USER GUIDE X 1
1.Place the TV flat on a table
(Caution: Place a foam pad under the machine to prevent scratching.)
2. Align the screw threads on the bracket and the underside of the TV (Figure 2)
3. Attach the stand and screen with the 2 screws provided. (Figure 3)
5. Sleep: To TURN the TV on and off.
Remark:
- Unplug the power plug first when installing or removing the TV stand. To prevent damage to the TV, contact
one or more partners for assistance installing or removing the TV stand.
BASE INSTALLATION & CONNECTION
WALL MOUNTING
Us standard BM *12 e 4
screws ( screws, not 4
included) to mount this
TV
*Imp
ortant Use 75 interference: a Ωantenna cable to eliminate . The antenna cable be should not
close insert 75 jack directly . TV, to the power cord When using cable the Ωantenna into the wall
outlet, be or ofwhich should connected antennato the building's communal the roof antenna the
house
Hanging the TV on a wall
Warning For installation,: safe follow these safety instructions:
Check that the nature of the wall or partition is capable of supporting the weight of the TV and
wall mount.
Make sure you use the right type of dowel according to the nature wall of the (concrete, brick,
plasterboard, plaster tile, etc.). If in doubt, seek professional advice.
Follow the installation instructions that came with the wall mount and use the screws
recommended by the manufacturer.
the Install TV on a .vertical wall
the Check that cable routing is safe for people
(Stumble, fall).
Use standard BM mm screws screws, 4*12 (4 not included) to mount this TV. The use of
different screws damage of the specified type will the wall mount bracket and void the product
warranty.
a Contact professional for help with wall mounting your TV.
Do not mount the TV on the wall when it is turned on.
to the Refer instructions for your wall mount bracket.
REMOTE CONTROL
The remote control must be used within the effective reception range of the
television. remote TV's make Point the control at the infrared receiver and sure
there no obstacles are in . between Its normal operating distance will be reduced
by sunlight or direct lamp light. Be . careful when using the remote control Do not
drop it, step on it, or expose it to .liquids
Note The and position the: symbols of remote control controls may vary by
model.
Preparing the remote control
Insert batteries the control according the polarity AAA two into remote to -) (+/
symbols indicated . (Batteries not included)
Different types batteries or new of and used batteries should be mixed not .
Batteries be installed in polarity manner batteries should must a . Used be
removed from of safely them . the product Batteries must be disposed . Place in
the collection bins provided (check with your retailer) to protect the environment .
Warning be that from: Batteries should not exposed to excessive heat such as
the sun, fire, or similar origin.
CONNECTION TO THE POWER SOURCE
1.STANDBY: Allows you to put the device in
standby mode, a second press turns it on.
2. Remote Control Sensor/Power Indicator: In
standby mode, the indicator light is red; When
illuminated, the light is blue
MAKE SURE THAT ALL EQUIPMENT AND THE POWER PLUG ARE PROPERLY PLUGGED IN AND
THAT THE DEVICE IS SET TO THE CORRECT MODE BEFORE ANY TYPE OF MANIPULATION.
Press the SLEEP button on the device or remote control to turn on the device (the light turns blue); Press this
key again to turn off (sleep mode) the device (the light turns red).
SELECT THE DESIRED PROGRAM
Press the CH+ key to play the next channel.
Press the CH- key to play the previous channel.
Press the number keys on the remote control directly to select the desired program.
VOLUME CONTROL
Press the VOL+ or VOL button - to adjust the current volume level. Available Adjustment Range: 0-100.
MUTE CONTROL
Press the MUTE key to mute the sound, press it again to turn the sound back on.
SOURCE SETTINGS
Press the SOURCE button on the remote control to display the list of sources.
Press the UP and DOWN navigation key to select the desired input source, and then press OK to confirm the
selection.
MULTIAUDIO TUNING
Press the MENU button on the remote control and use the navigation keys to select the desired audio
language.
NOTE: To enable this feature, make sure the channel you're watching supports multi audio languages.
INFORMATION DISPLAY
Press the INFO button on the remote control to display the current program information.
MEDIA PLAYBACK
Insert a USB storage device into the USB port before performing the following steps.
Press the SOURCE button on the remote control to switch the unit to USB mode.
Press the UP/DOWN/LEFT/RIGHT navigation keys to move the cursor.
Press the BACK button to return to the previous page of the menu.
BASIC USE
MAKE SURE THAT ALL EQUIPMENT AND THE POWER PLUG ARE PROPERLY PLUGGED IN AND THAT THE DEVICE IS SET TO THE CORRECT MODE BEFORE ANY TYPE OF
MANIPULATION.
2
FIRST INSTALLATION
1
STANDBY
Put the TV on standby or on.
2 TV/RADIO
Switch between TV and radio mode.
3 / 4 / 5 / 6
7 SUBTITLE
Enable/
disable subtitles.
8 TEXT
View
available teletext.
9 EPG
View
the e-Program Guide.
10
HOLD
Hold the
teletext.
11
AUDIO
Change the available audio track.
12
Start/pause playback.
13
SUBPAGE
Enter a subpage of the teletext.
Move
quickly.
14
SIZE
Change the size of the teletext.
To
retreat quickly.
15
This feature is not available.
16
Stop playback.
17
.
Read the
following Chapter.
INDEX
Display the index of teletext.
18
.
Read the
previous Chapter.
FAV
View a list of favorite channels.
19
MENU
Call up the main menu or go back to the previous menu.
20
SOURCE
Select the desired input source.
21 OK
Confirm
selection.
22
Navigation buttons.
23
EXIT
Exit the menu page.
24
ASPECT
Change the aspect ratio of the image on the screen.
25 MUTE
Mute the
sound.
26 VOL +/
-
Increase/decrease the volume level.
27 CH +/
-
Read the next/previous program.
28 DISPLAY
View
available program information.
29 DIGITS (0
-9)
Enter string numbers or values
30
-/--
Change the number while watching TV programs.
31.
Go back to the previous channel.
5 HDMI inputs1/2/3
6 PortsUSB 1/2
7 CI Port (Common Interface)
8 Headphone Audio Output
1 -AC power socket 100 240V
2
Coaxial audio output
3
CVBS and Audio L/R input
4
Antenna input Air 75 Ω*
Connect the TV to a power source and turn it on by
pressing the STANDBY button on the remote, the following
setup page will be displayed on the screen.
Press the navigation button
to move the cursor.
Press the navigation button
to select an option.
Language: Select the language from the menu on the
screen.
Country: Select your country.
Energy Mode: Select Home mode for home use or Store
mode for commercial demo use.
Once the above selections are complete, press the OK key
to invoke the tuning configuration. 'Tuning Setup.
Tuning Setup
Select the tuning type and type
digitalusing navigation buttons
and press the OK key to start automatic tuning.
France standard type is by Air* DVB-T for DTT.
LCN in ON to arrange the program numbers in order.
Remark:
*
AIR= Hertzian
Elements following the digital type are adjustable only when the digital type is DVB-C and these elements vary depending on the digital type.
The presence hazardous substances electrical and can consequences for of in electronic waste have the
environment and health during reprocessingits cycle.
Thus, at end its life, product should be thrown away other nonthe of this not with -recyclable . As waste an end
user, play key the reuse, recycling and other thisyou a role in cycle of forms of ofrecovery electrical and
electronic equipment Local authorities and retailers specific procedures for the collection and. have in place
recycling .of this product
You are obliged the separate collectionto use waste systems set up by your local authorities.
DISPOSAL
General Product Parameters declaredValue ( ) Unit
1.
Vendor name or brand HIGHONE
Vendor address
Customer relationship,
Campus Electro Dépôt,
1 route de Vendeville
F- -59155 Faches Thumesnil
2.
Model ID
HI3227HD-GM
3. Energy efficiency class SDR mode E
4 Power consumption on SDR
26
W/h
5 Energy efficiency class HDR mode
N/A
6 Power consumption on HDR
N/A
W
7 Power consumption in off mode
0
W
8 Power consumption in standby mode
0.33
W
9 Power consumption in offline mode
N/A
W
10 ElectronicDisplay Category
TV
11 Size ratio(X : Y)
16:9
-
12 Screen resolution(H X V)
1366*768
pixels
13 Screen diagonal(cm)
80
cm
14 Screen diagonal( )inches
32
Inches
15 Visible area of the screen
27,4
Dm2
16 Panel technologyused LED
17 NonAutomatic brightness adjustment (ABC) available Yes/No
18 Voice recognition sensor available Non Yes/No
19 Room presence sensor available Non Yes/No
20 60Image refresh rate Hz
21
Guaranteed minimum availability of software and firmware
updates (from the end-of-sale date)
11
YEARS
22
Guaranteed minimum availability of spare parts (from the
date of end of market entry))
11 YEARS
23 GuaranteedMinimum Product Support 11 YEARS
Minimum duration of the general warranty offered by
the supplier
2 YEARS
24 Power Supply Type Interne
The product information sheet in accordance with the European Regulation No. 2019 2013 /
Energy labelling for electronic displays and television can be found on the QR code or at the
following link:https://eprel.ec.europa.eu/qr 2163956/
PRODUCT INFORMATION SHEET
Remark:
1. Energy efficiency class is designated by letters ranging from A (very economical) to G (not very
economical).
2. TV consumption is based on 1000 hours of use. Actual power consumption may vary depending on run
time and contrast or brightness settings.
Before press cleaning this product, the STANDBY button to put it into standby mode
and wait a few minutes before the .unplugging AC plug
Wipe product cloth not on but this a with soft, dry . Do spray water directly the TV,
apply amount of a small water to the corner of the cloth and wipe it as gently as possible.
Never use cleaning fluids, orwax, chemicals.
CLEANING AND MAINTENANCE INSTRUCTIONS
Never use alcohol, benzene, thinner, cleaning fluid, or other . chemicals Do not use compressed air
to remove dust.
If is wipe the surface extremely dirty, a a it with cloth dampened with weak soapy water solution and
wrung out well, then wipe again with a .dry cloth
Before plugging the TV back in, allow the screen dry completely to .
CE Declaration of Conformity
This television complies with - type device the essential requirements and other provisions
of well / /EU & / EU Directive 2014 35 2014 30 as as the Radio Equipment Directive (RED)
2014 53 on June 12 2016 The Declaration/ /EU which was implemented , . of Conformity is
available on the website electrodepot fr/sav/notices : .http //www .
We i
nvite the you to scan : :Qrcode or go to http //www fr/sav/notices. .electrodepot for any additional information
on your : TV user manual FAQ Troubleshooting guide etc...
LEARN MORE
sav@gms.fr
QUICK USER GUIDE
E.Doc
THANK YOU !
Thank choosing you for this .HIGHONE product
Chosen, by tested and recommended ELECTRO
DEPOT, HIGHONE brand products synonymous are with
simple use, reliable performance and impeccable quality.
With this device, you know that every use will bring you
satisfaction.
Welcome DEPOT.to ELECTRO
Visit our website : www. .electrodepot fr
EN
Because your satisfaction is our priority, we invite you to give your opinion on
this product. It will be transmitted and analyzed by our teams in order to
continuously improve the product.
Write a review on: http://www.electrodepot.fr/avis client-
http:// clientwww.electrodepot.be/avis-
10002967 HI3227HD-GM
Téléviseur
Television


Product specificaties

Merk: High One
Categorie: Televisie
Model: HI3227HD-GM

Heb je hulp nodig?

Als je hulp nodig hebt met High One HI3227HD-GM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden