Hifonics BRUTUS BG-1000.1 Handleiding


Pagina's 7 Receiver

Bekijk de handleiding van Hifonics BRUTUS BG-1000.1 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Quick Start
Installation Guide
BG-700.1
BG-1000.1
BG-1400.1
BG-3000.1
Congratulations on your choice of a Hifonics amplier.
This “Quick Start Installation” guide is meant to help you
on system setting, speaker and subwoofer conguration
and full specications by model visit the website,
http://hifonics.com/manuals.html
BG-560.2
BG-1000.2
BG-520.4
BG-1100.4
Place terminal in a secure
position so that it won’t
accidentally contact the
negative battery post
Power cable size
and fusing
It is critical to use the proper power
and ground cable. Select the size
Always use high quality OFC wire.
Visit our website for multi amp
system cable recommendations.
Be sure to use the proper fuse size
for each model.
Properly route power,
speaker and RCA cables
through the vehicle.
Choose a mounting location
that will provide adequate air
a secure surface. Do not mount
Disconnect
negative battery
terminal
Run Cables
Installation
Before you start
CAUTION
Many new and factory radios require a reset code when
disconnected from battery power. This is an anti-theft
feature. Before unplugging power, you must determine if
your radio/source unit requires a reset code. Check the
operation manual for your vehicle or contact the dealer.
1
2
3
Model Fuse Size
Cable
Size
4ga
1/0ga
BG-0.256
BG-10.200
BG-700.1
BG-10.100
BG-10.140
BG-520.4
BG-1100.4
BG-30.100
2 x A MATC30ini
80A Exterlna
2 x 40A MATCini
3 x 30A MATCini
1Exterl50A na
2 x A MATC30ini
3 x 40A MATCini
2Exterl50A na
Attach the chassis ground
cable to the amplier
negative terminal. It is
important to make sure this
connection is very tight.
Bare metal
Attach the main power cable
to the amplier +12V. The
cable must run directly to
the battery and be properly
fused and be very tight.
Attach the remote turn on
wire to the amplier remote
output of the source unit.
Connect the RCA cables to the
coordinating RCA input number
that will match the speaker
outputs number.
Connect the high-level input
wires to the matching factory
speaker wires so each channel
corresponds with the correct
input to the amplier.
The chassis ground connection
is critical to the performance
of the amplier. Choose a
location that is close to the
amplier. Completely scrape
away the paint and use a nut
and bolt if possible.
DO NOT USE AN EXISTING
FACTORY BOLT!
Negative Power
Connection
Positive Power
Connection
Remote Turn-on
Connection
Signal Input
Connections
Chassis Ground
5
7
6
8
4
POWER
Channel 1+ = White
Channel 1- = Gray
Channel 2+ = Blue
Channel 2- = Green
Channel 3+ = Yellow
Channel 3- = Orange
Channel 4+ = Red
Channel 4- = Brown
or

Beoordeel deze handleiding


Product specificaties

Merk: Hifonics
Categorie: Receiver
Model: BRUTUS BG-1000.1

Heb je hulp nodig?

Als je hulp nodig hebt met Hifonics BRUTUS BG-1000.1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden