HGLRC M100-5883 GPS Handleiding
HGLRC
Niet gecategoriseerd
M100-5883 GPS
Bekijk gratis de handleiding van HGLRC M100-5883 GPS (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.5 sterren uit 2.5 reviews. Heb je een vraag over HGLRC M100-5883 GPS of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
HGLRC M100-5883 GPS
Manual
M100-5883 GPS
M100-5883 GPS
instruction manual
M100-5883 GPS
M100-5883 GPS
instruction manual
M100-5883 GPS
M100-5883 GPS
instruction manual
M100-5883 GPS
M100-5883 GPS
instruction manual
M100-5883 GPS
M100-5883 GPS
instruction manual
Parameters
Receiver Type：■GPS/QZSS L1C/A■SBAS EGNOS、GAGAN、MSAS和WAAS
■GLONASS L1OF ■BDS B1I ■Galileo E1B/C
Sensitivity: Tracking and Navigation -166DBM, re-obtain -160dbm, cold start-148dbm
The first fix¹ time: Cold start 29s, hot start 1S
Horizontal positionaccuracy²: .02 m CEP
Accuracy of Time Mai Signal: RMS 30ns, 99% 60ns
Speed precision m: 0 m/s.05
Operating limits: Interaction ≤ 4 g, altitude 80,000 m, speed 500 m/s
Frequency of time pulse signal: 1Hz
Potter rate: 9,600 -460800 BPS (default is 115200 bps)
Maximum navigation update rate: 10Hz (default 10 Hz, configuration)
*The default GPS+Galileo+QZSS+SBAS, BDS and Honor are not supported at the same time
1. All satellites are ≥-130dBm
2. CEP 50%, 24 hours static, ≥-130dBm, > 6SVs
3. 50%, 30 m/s, dynamic operation
4. Assuming onboard < 4g platform
Introduction
POWERPPS
SCL
SDA
RX
TX
5V
GND
Wiring diagram
SCL
SDA
RX
TX
5V
GND
Connect the GPS to any port of the flight controller according to the wiring diagram,
and use UART3 as a demonstration
(Note: Be sure to connect to a free serial port or a dedicated GPS serial port)
Open the configuration page of INAV, set the sensor input type to GPS,
and the baud rate to 115200
Turn on GPS and enable UBLOX protocol
Compass Selection QMC 5883
Open the port page of Betaflight, set the sensor input type to GPS,
and the baud rate to 115200
，
Power on the aircraft, the indicator light will be on when the GPS is working
normally, and the GPS logo on the top of Betaflight will be on
Find UART3, turn on GPS at sensor input and select baud rate 115200
Find UART3, turn on GPS at sensor input and select baud rate 115200
Precautions
1. After turning on the compass, please calibrate it before using it.
2. Please supply power to GPS according to the voltage within the specified range.
3. Please carefully solder according to the wiring diagram to avoid short-circuiting and burning the GPS.
4. Please use BF4.3.0 or above firmware (too low version does not recognize the 10th generation chip).
5. GPS must be installed with the antenna facing up and away from motors, power lines and other interfering parts
Turn on GPS and enable UBLOX protocol
INAV settings
Betaflight settings
Power on the aircraft, the indicator light is on when the GPS is working normally,
and the GPS and compass lights on the top of the inav are on
Indicator light
Normal start
Real position accuracy
PPS (red light))
normal bright
Flickering
Power (blue light)
normal bright
normal bright
Contact us
Company name:Guangdong Huagulong Technology Co., Ltd.
After sales email:hglrc@support.com
Official website:www.hglrc.com
Address:8th Floor, Building C1, Juntong Industrial Park, No. 9 Jiuyuan Road, Zhushan,
Dalang Town, Dongguan City, Guangdong Province 523770,China
Compass direction
Compass direction
Product specificaties
| Merk: | HGLRC |
| Categorie: | Niet gecategoriseerd |
| Model: | M100-5883 GPS |
Heb je hulp nodig?
Als je hulp nodig hebt met HGLRC M100-5883 GPS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd HGLRC
2 Mei 2025
Handleiding Niet gecategoriseerd
- Global Water
- Koliber
- GP
- Proctor Silex
- Gaslock
- Dehner
- Coyote
- Tece
- InfiRay
- XD-Design
- Comatec
- Hikvision
- GeoVision
- Cooper Lighting
- Master
Nieuwste handleidingen voor Niet gecategoriseerd
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025