Hestan AGSDR30 Handleiding

Bekijk gratis de handleiding van Hestan AGSDR30 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over Hestan AGSDR30 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

©2019 Hestan Commercial Corporation

1

EN

COLORED PANEL

REPLACEMENT

CABINETRY - AGCP SERIES

IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN

THE INSTRUCTIONS HEREIN SHOULD BE PERFORMED BY A QUALIFIED SERVICE TECHNICIAN.

IF CABINET OR DRAWER IS NEAR AN APPLIANCE, IT MUST BE COMPLETELY COOL AND THE GAS

SOURCE MUST BE SHUT OFF. THE POWER MUST BE DISCONNECTED.

Some parts inside your cabinet or drawer have sharp edges. Care must be

taken when handling the various components to avoid personal injury. Wear

gloves when handling.

TOOLS REQUIRED:

Flat and Phillips screwdrivers

PART REPLACEMENT - TYPICAL DOOR (VARIOUS PRODUCTS)

1. Unclip door hinge from frame. Consult the

Installation Manual 009798 or 009799 which came

with your cabinet product. If door was part of a

Grill Cart, consult the manual which came with

the cart.

Remove the hinges from the back face of the door

as shown in Fig. 1.

FIG. 1

2. Lay the door on a flat surface with a blanket or

towel to protect the door finish. Remove the door

liner by removing all screws as shown in Fig. 2.

FIG. 2

Product specificaties