Heat Seal PC-1318 Handleiding
Heat Seal
Niet gecategoriseerd
PC-1318
Bekijk gratis de handleiding van Heat Seal PC-1318 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.4 sterren uit 2 reviews. Heb je een vraag over Heat Seal PC-1318 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Revised 2017
READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING EQUIPMENT
OPERATING & SERVICE PARTS MANUAL
PIZZA CAPPER PC- 1318
*Pizza Capper shown with optional
Model 83 Film Dispenser
2
Revised 2017
CAPPING THE PIZZA
Install the appropriate platform for the size of pizza being
wrapped, the 5” disk is for pizzas up to 13” and the 11”
disk is for pizzas up to 18”.
Plug the electrical cord into a standard 110 volt grounded
outlet.
Turn the 12 Hour Timer (2) light will indicate that the
power is on. To set the timer, turn the dial past 2 and
then to the setting you want to leave the wrapper on (1 to
12 hours).
Allow approximately ten minutes for pizza wrapper to
heat to sealing temperature.
Place pizza on a cardboard disc, then place pizza
centered on the platform (1).
Cover pizza with shrink film (3) The pizza film should be
about double the size of the pizza diameter for sufficient
coverage.
Gently tuck the film edges under the cardboard (4) with
your fingers or a tool. Allow the film to shrink for up to
thirty seconds (this time varies depending on the
thickness of the film being used and the temperature set
on the thermostat).
Remove the wrapped pizza from the platform with the
pizza fork (5).
Allow wrapper to completely cool before handling or
cleaning.
DO NOT HANDLE OR TOUCH SURFACES UNTIL
THE UNIT HAS HAD ENOUGH TIME TO COOL.
BE CAREFUL WHEN TUCKING EDGES
OR REMOVING PIZZA FROM PLATFORM,
THE WRAPPER AND FILM CAN BE HOT.
1
2
3
4
5
3
Revised 2017
CLEANING & MAINTENAN CE
TO CLEAN THE PIZZA C APPER
When cleaning or maintaining the PC-1318, make sure to let the machine cool completely and remove power from the unit.
DO NOT submerge or wash down the unit.
The PC-1318 comes with a removable stainless steel crumb tray (1). When the Pizza Capper has cooled down, pull out the
crumb tray and wash or wipe down.
The stainless steel Pizza Capper fork (2) can be washed or wiped down.
The platform and round grate (3) can be removed and washed or wiped down.
The outer and inner rings can also be removed by loosening the three thumb knobs (4) on the sides and the back of the
Pizza Capper.
1
4
3
2
Product specificaties
| Merk: | Heat Seal |
| Categorie: | Niet gecategoriseerd |
| Model: | PC-1318 |
Heb je hulp nodig?
Als je hulp nodig hebt met Heat Seal PC-1318 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Heat Seal
26 Augustus 2025
Handleiding Niet gecategoriseerd
- Klipsch
- Navionics
- Golden Age Project
- Blustream
- Plugwise
- Weltevree
- Cygnett
- SoundTube
- Libec
- Mammut
- Christmaxx
- DataComm
- BrightSign
- VTech
- FORS
Nieuwste handleidingen voor Niet gecategoriseerd
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025
26 Augustus 2025