Haws 3202G Handleiding


Pagina's 4 Water dispenser

Bekijk de handleiding van Haws 3202G gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

12Page /17 Model 3202/3202G 1 of 4
No. 2077328 ( 25)
1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359Fax (775) 359-4712 -7424
E-mail: Info@hawsco.comwebsite: www.hawsco.com
Model 3202/3202G
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material
or poor workmanship for a period of one year from date of shipment. HAWS
liability under this warranty shall be discharged by furnishing without charge F.O.B.
HAWS Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS,
Sparks, Nevada. HAWS will not be liable for any damages caused by defective
materials
or poor workmanship, except for replacements, as provided above. Buyer
agrees that HAWS shall not be liable for general, special, or consequential
damages claimed to arise under the contract of sale. The drinking fountain
manufactured by HAWS is warranted
to function if installation and maintenance
instructions provided are adhered to. The units also must be used for the purpose
for which they were intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1--- 8007665612
FOR CUSTOMER SERVICE: 1--- 8886404297
12Page /17 Model 3202/3202G 2 of 4
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"
adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket
wrench or open end wrench.
LOCATION OF UNIT: The Model 3202/3202G Drinking Fountain is a wheelchair
accessible drinking water facility. The height dimensions shown, meet current ADA
requirements. When installing this unit, local, state or federal codes should be adhered
to. If height other than shown is required, then dimensions must be adjusted
accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2with 30“IPS -90 psi (2-6
ATM) pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet is 1/4" IPS male fitting.
MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual
for more information.
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop valve is in
wide- open position.
b.
Verify minimum 30 psi flowing supply
pressure.
c.
Clean strainer. See 5874 SeriesValve
Manual.
d.
Adjust valve to increase flow. Use front
adjust screw or see 5874 SeriesValve
Manual.
General Notes:
Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to
ensure correct engagement with O- Ring.
For more information about Haws products, see our website: www.hawsco.com
© 2017 Haws
®
– Corporation All Rights Reserved
HAWS
®
and other trademarks used
in these materials are the exclusive property of Haws Corporation.
2
1
4
5
6
OPTIONAL
APPROVED
DRAWN
PART NUMBER
SCALE:
SHEETOF
REVISION
DRAWING TYPE:SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
(775) 359-4712 FAX (775) 359-7424
E-MAIL: HAWS@HAWSCO.COM
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
D.OLLOM
11-25-95
25
0002077328
3202/3202G
.
1:4
11
FV
02/23/18
.
GC
3 OF 4
PARTS BREAKDOWN
5265
2017
JP
PARTS BREAKDOWN
4
REF
ROTATED 90° INTO VIEW
DETAIL A
REMOVE INSERT
WITH 5/16 HEX SOCKET
(NOT SUPPLIED)
2
NOTES:
1 5874PB (ITEM 1) INCLUDES VRK5874 CARTRIDGE ASSEMBLY
(ITEM 2) AND PBA7 RECESSED PUSH BUTTON (ITEM 3).
2 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE
BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE
222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO
BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.
BUBBLER HEAD ASSEMBLY, PCP
3
DESCRIPTION
ITEM3202/3202G
5703M
VRK5874VALVE REPAIR KIT
5
6
PBA7
4
6250LF
2
0006983506
1
BUTTON ASSEMBLY, PUSH, 5874
BIB FAUCET (OPTIONAL)
SPANNER WRENCH
BUTTON, PUSH, RECESSED, PCP W/ VALVE5874PB
1
1
1
3
(NOT SHOWN
SEE DETAIL A)

Beoordeel deze handleiding


Product specificaties

Merk: Haws
Categorie: Water dispenser
Model: 3202G

Heb je hulp nodig?

Als je hulp nodig hebt met Haws 3202G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden