Havis C-DMM-134 Handleiding

Havis Niet gecategoriseerd C-DMM-134

Bekijk gratis de handleiding van Havis C-DMM-134 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.4 sterren uit 12.5 reviews. Heb je een vraag over Havis C-DMM-134 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/5

C‐DMM‐134_INST_5‐17



INSTALLATIONINSTRUCTIONS

C‐DMM‐134

2011 2018‐ NissanFrontier

SWING‐OUT MOUNTDASHMONITOR 

Always!

 Read        all instructions before installing any Havis, Inc. products.

 Check            for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!

 Use hardware

rovidedwithinstallkit

TheDash Monitor or Mountbracketsystemmayrequiretwo threemain Sold parts that are 

Separately.SeewebsiteMonitorConfiguratorformoredetailedbracketinformation.

http://www.havis.com/monitor_mounts.htm 



 1‐VehicleSpecificdashmountbracket.(C‐DMM‐134)

 1‐ComputerSpecificMonitoradaptorbracket.(C‐MM‐200series)

 1‐Offsetadaptorbracket.(C‐MM‐301)

The required ‐C MM MM‐301offsetadaptorgoes between the ‐C DMM‐134and ‐C‐2XX.Itmaynotbe insome

applications.



Tabletdockingstations with Vesa75holepattern withoutcan DMMbe bolted directlyto ‐C adaptor.

Offset options  ‐adaptor C MM available‐303is ifadditional positioning  aredesiredfordockingstation.



TOOLSREQUIRED:(some tools are     not needed for all vehicle installations)

• & •Socketset‐metric standardPhillipsscrewdriver

• Trim •removaltools  Fileorplasticcuttingtool



HARDWAREandPARTS:



QTY:  DESCRIPTION:   PART#:  

1  Driversidelowermountingbracket  CM008634

1  Passengersidelowermountingbracket CM008635

1  Forwarduppermountingbracket  CM008527

1  Rearuppermountingbracket  CM008528

4  1/4"Serratednut    GSM30023

5 x  10‐32 1/2”Machinescrew   GSM33118

5  #10Flatwasher    GSM31003



Note:                    The swing door utilizes a gas spring to assist in opening the door and to eliminate the possibility of it