Harman Kardon BDP10/230 Handleiding

Harman Kardon Blu-ray speler BDP10/230

Lees hieronder de 📖 handleiding in het Nederlandse voor Harman Kardon BDP10/230 (34 pagina's) in de categorie Blu-ray speler. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/34

BLU-RAY DISC™ PLAYER

OWNER’S MANUAL

SAFETY INFORMATION

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly

at plugs, convenience receptacles and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the

manufacturer or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure

that no objects filled with liquids, such as vases, are placed on the

apparatus.

16. To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

18. Do not expose batteries to excessive heat such as sunshine, fire or the

like.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the product.

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

Declaration of Conformity

We, Harman Consumer Group, Inc.

2, Route de Tours

72500 Château-du-Loir,

FRANCE

declare in own responsibility, that the product described in this owner’s

manual is in compliance with technical standards:

EN 55013:2001

EN 55020:2002

EN 61000-3-2:2000

EN 61000-3-3:1995+A1:2001

EN 60065:2002

Jurjen Amsterdam

Harman Consumer Group, Inc.

02/09

CLASS 1

LASER PRODUCT

Class II equipment symbol

This symbol indicates that the unit has

a double insulation system

ENGLISH

SAFETY INFORMATION

Important Safety Information

Verify Line Voltage Before Use

Your BDP 10 has been designed for use with 110–240-volt AC current, and the

plug is specifically designed for 230-volt applications. Connection to a line voltage

other than that for which the plug is intended can create a safety and fire hazard

and may damage the unit.

If you have any questions about the voltage requirements for your specific model,

or about the line voltage in your area, contact your selling dealer before plugging

the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord supplied with your unit. We

do not recommend that extension cords be used with this product. As with all

electrical devices, do not run power cords under rugs or carpets or place heavy

objects on them. Damaged power cords should be replaced immediately by an

authorized service center with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never

pull the cord. If you do not intend to use the unit for any considerable length of

time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the

cabinet may present a shock hazard, and any modification to the product will

void your guarantee. If water or any metal object such as a paper clip, wire or

staple accidentally falls inside the unit, disconnect it from the AC power source

immediately, and consult an authorized service center.

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards, place

the unit on a firm and level surface. When placing the unit on a shelf, be certain

that the shelf and any mounting hardware can support the weight of the product.

• Make certain that proper space is provided both above and below the unit for

ventilation. If this product will be installed in a cabinet or other enclosed area,

make certain that there is sufficient air movement within the cabinet. Under

some circumstances, a fan may be required. The unit should be placed on its

own shelf, not directly on top of another component.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations, or in an area that is exposed

to direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the ventilation slots on the unit, or place objects directly over

them.

• Due to the heat generated by operation of the BDP 10 and other

componentsin your system, there is the remote possibility that the rubber

padding on the bottom of the unit’s feet may leave marks on certain wood or

veneer materials. Use caution when placing the unit on soft woods or other

materials that may be damaged by heat or heavy objects. Some surface

finishes may be particularly sensitive to absorbing such marks, due to a variety

of factors beyond Harman Kardon’s control, including the nature of the finish,

cleaning materialsused, and normal heat and vibration caused by the use of

the product, or otherfactors. We recommend that caution be exercised in

choosing an installation location for the component and in normal maintenance

practices, as your warranty will not cover this type of damage to furniture.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only

after unplugging the AC power cord, wipe it with a soft cloth dampened with mild

soapy water, then a fresh cloth with clean water. Wipe it dry immediately with a dry

cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile

cleaning agent. Do not use abrasive cleaners, as they may damage the finish of

metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with

other components, and make certain that you disconnect the unit from the AC

outlet.

NOTE: To avoid damage to the BDP 10 that may not be covered by the warranty,

remove the disc from the unit before it is moved. Once the BDP 10 is installed,

a disc may be left in the unit when it is turned off, but the unit should NEVER be

moved with a disc left in the disc tray.

Important Information for the User

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. The limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio- frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communication. However, there is no

guarantee that harmful interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept interference received, including interference that may

cause undesired operation.

NOTE: Changes or modifications may cause this unit to fail to comply with Part

15 of

the FCC Rules and may void the user’s authority to operate the equipment.

CAUTION: The BDP 10 uses a laser system. To prevent direct exposure to the laser

beam, do not open the cabinet enclosure or defeat any of the safety mechanisms

provided for your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper

use of this product, please read this Owner’s Manual carefully and retain it for future use.

Should the unit require maintenance or repair, please contact your local Harman Kardon

service center. Refer servicing to qualified personnel only.

Unpacking

The carton and shipping materials used to protect your new player during shipment

were specially designed to cushion it from shock and vibration. We suggest that

you save the carton and packing materials for use in shipping if you move, or

should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is

done by carefully slitting the tape seams on the bottom and collapsing the carton. Other

cardboard inserts may be stored in the same manner. Packing materials that cannot be

collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton

and other sections of the shipping protection are recyclable. Please

respect the

environment and discard those materials at a local recycling center.

It is important that you remove the protective plastic film from the front-panel lens.

Leaving the film in place will affect the performance of your remote control.

Product specificaties

Merk:	Harman Kardon
Categorie:	Blu-ray speler
Model:	BDP10/230
Kleur van het product:	Zwart
Gewicht:	3700 g
Breedte:	440 mm
Diepte:	352 mm
Hoogte:	66 mm
Ondersteund audioformaat:	MP3,WMA
Ondersteunde videoformaten:	H.264,MPEG2,MPEG4,VC-1
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Stroomverbruik (in standby):	1 W
Ondersteund beeldformaat:	JPG
HDMI:	Ja
HDMI versie:	1.3a
Audio (L,R) out:	1
Digitale audio, optische uitgang:	1
Ingebouwde audio decoders:	Dolby Digital,Dolby Digital Plus,Dolby TrueHD,DTS-HD
Soort apparaat:	Blu-Ray speler
Afspeel modi:	Fast,Repeat,Rotation,Slow
Op afstand bedienbaar:	Ja
Signaal/ruis-verhouding:	100 dB
Dynamisch bereik (1 kHz):	100 dB
Digitale audio, coaxuitgang:	1
Optische drive type:	BD-R,CD,CD-R,CD-RW,DVD+R,DVD+RW,DVD-R,DVD-RAM,DVD-RW
Afspeelformaat:	MP3, WMA, JPEG
Afmetingen (B x D x H):	440 x 352 x 66 mm
Totale harmonische vervorming (THD):	0.0025 procent
Afstandsbediening inbegrepen:	Ja
Draagbaar:	Nee
BD-Live:	Ja
Wifi:	Nee
AC-ingangsspanning:	110 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	28 W
DVD regio code:	2