Hannspree HL195ABB Handleiding

Hannspree Monitor HL195ABB

Lees hieronder de 📖 handleiding in het Nederlandse voor Hannspree HL195ABB (23 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
HL195
HSG1145
OSD[V4.393]
Users Manual OSD[4.393]
2
Before operating the monitor, please read this manual thoroughly. This manual should be retained for
future reference.
FCC Class B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two
conditions (1) this device may not cause harmful interference and (2) this device must accept any ﹕ ﹔
interference received, including interference that may cause undesired operations.
CANADA
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulation.
This device complies with requirement of EMC directive 2004/108/EC with regard to
Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive.
Socket-outlet shall be near the equipment and shall be accessible.
Users Manual
3
Congratulations!
This display is designed for both you and the planet!
The display you have just purchased carries the TCO
Certified label. This ensures that your display is
designed, manufactured and tested according to some of
the strictest quality and environmental requirements in
the world. This makes for a high performance product,
designed with the user in focus that also minimizes the
impact on the climate and our natural environment.
TCO Certified is a third party verified program, where every product model is tested by an accredited
impartial test laboratory. TCO Certified represents one of the toughest certifications for displays
worldwide.
Some of the Usability features of the TCO Certified for displays:
Good visual ergonomics and image quality is tested to ensure top performance and reduce sight
and strain problems. Important parameters are luminance, contrast, resolution, black level,
gamma curve, color and luminance uniformity, color rendition and image stability
Product have been tested according to rigorous safety standards at an impartial laboratory
Electric and magnetic fields emissions as low as normal household background levels
Low acoustic noise emissions
Some of the Environmental features of the TCO Certified for displays:
The brand owner demonstrates corporate social responsibility and has a certified environmental
management system (EMAS or ISO 14001)
Very low energy consumption both in on- and standby mode minimize climate impact
Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and heavy
metals such as cadmium, mercury and lead (RoHS compliance)
Both product and product packaging is prepared for recycling
The brand owner offers take-back options
The requirements can be downloaded from our web site. The requirements included in this label have
been developed by TCO Development in co-operation with scientists, experts, users as well as
manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing
the development of IT equipment in a more user-friendly direction. Our labeling system started with
displays in 1992 and is now requested by users and IT-manufacturers all over the world. About 50%
of all displays worldwide are TCO certified.
For more information, please visit
www.tcodevelopment.com
Mandate:
For displays that have a gloss value G (60°) >30 gloss units the following consideration note for
the placement of the FPD shall be given in the user manual.
For displays with glossy bezels the user should consider the placement of the display as the
bezel may cause disturbing reflections from surrounding light and bright surfaces.”


Product specificaties

Merk: Hannspree
Categorie: Monitor
Model: HL195ABB
Kleur van het product: Zwart
Snoerlengte: 1.8 m
Gebruikershandleiding: Ja
Beeldscherm: LCD
Beeldschermdiagonaal: 18.5 "
Resolutie: 1366 x 768 Pixels
Touchscreen: Nee
Oorspronkelijke beeldverhouding: 16:9
Kijkhoek, horizontaal: 160 °
Kijkhoek, verticaal: 160 °
Meegeleverde kabels: VGA
Typische contrastverhouding: 1000:1
Snelstartgids: Ja
VGA (D-Sub)poort(en): 1
Bevestigingsmogelijkheid voor kabelslot: Ja
Kabelslot sleuf type: Kensington
Ingebouwde luidsprekers: Ja
Gemiddeld vermogen: 2 W
Stroomverbruik (in standby): 1 W
Aantal luidsprekers: 2
Certificering: CE, CB, GOST, BSMI, PSB, KC, 3C, Energy Star 5.0, CN energy level 1, E-Standby, EuP, TCO 5.0, FCC, UL/CUL, Nemko-GS
Beeldscherm, aantal kleuren: 16.78 miljoen kleuren
HDCP: Nee
Stroomverbruik (indien uit): 0.5 W
HD type: HD
Ingang stroom: Ja
3D: Nee
Responstijd: 5 ms
Pixel pitch: 0.3 x 0.3 mm
Ondersteunde grafische resoluties: 1366 х 768
VESA-montage: Ja
Paneelmontage-interface: 100 x 100 mm
Duurzaamheidscertificaten: ENERGY STAR
Helderheid (typisch): 250 cd/m²
Beeldverhouding: 16:9
Contrast ratio (dynamisch): 15000000:1
Geïntegreerde TV Tuner: Nee
Ingebouwde camera: Nee
Diepte ( zonder voet ): - mm
Hoogte (zonder voet ): - mm
Breedte ( zonder voet ): 447 mm
Gewicht (zonder voet): 2500 g
On Screen Display (OSD)-talen: CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS
Breedte apparaat (met standaard): 447 mm
Diepte apparaat (met standaard): 174.28 mm
Hoogte apparaat (met standaard): 331.12 mm
Gewicht (met standaard): 2500 g
Mogelijkheden tot aanpassen schermafmetingen: 16:9
On Screen Display (OSD): Ja
Aantal On Screen Display-talen: 12
Thin client geïnstalleerd: Nee
Kijkhoek: 160 °
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Stroomverbruik (typisch): 28 W
Bedrijfstemperatuur (T-T): 5 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 20 - 85 procent
Bereik kantelhoek: -5 - 15 °

Heb je hulp nodig?

Als je hulp nodig hebt met Hannspree HL195ABB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Hannspree

Handleiding Monitor

Nieuwste handleidingen voor Monitor