Halifax FTFHP930 Handleiding

Halifax Afzuigkap FTFHP930

Lees hieronder de 📖 handleiding in het Nederlandse voor Halifax FTFHP930 (4 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Revised 10/2019
Receiving and Storage
Once equipment is received, check for both obvious and hidden damage. If damage is found, record all
necessary informaon on the bill of lading and le a claim with the nal carrier. Check to be sure that
all parts of the shipment, including accessories, are accounted for.
UNPACKING
Verify that all required parts and the correct quanty of each item have been received. If any items are
missing, report shortages to your representave to obtaining missing parts. Somemes it is not possi-
ble that all items for the unit be shipped together due to availability of transportaon and truck space.
Conrmaon of shipment(s) must be limited to only items on the bill of lading. Filters are typically
shipped in the hood, but somemes are shipped on a separate skid in their original packaging. Do not
remove factory packaging or install lters unl just prior to commissioning. Remove all other shipping/
packing materials.
WARNING!!
Installaon of this unit should only be performed by a qualied professional.
Please read the instrucons thoroughly before installing or servicing this equipment.
LISTING
This hood is listed to ANSI UL710 and CAN/ULC S646-10 and built to the “NFPA 96” Naonal Fire
Protecon Associaon Standard
WARRANTY
This equipment is warranted to be free from defects in materials and workmanship, under normal use
and service, for a period of 24 months from date of shipment – See full Installaon Instrucons for
Details.
INSTALLATION
It is necessary to install and operate this unit with the airow (CFM) designed for the size of hood,
lters and installaon based on the informaon provided.
SITE PREPERATION
1. To safely li equipment into the nal installed posion you must make sure the area of installaon
is clear. Make sure you have enough room aer installaon to service unit easily.
2. Verify the locaon that the hood will be installed so there is
nothing to interfere when installing
the unit.
3. Review your plans and specicaons for your project.
4. Conrm and verify the supports will support the weight of the
hood and fan mounted on top of the truck.
5. If installing light xtures
a. Have electrician following wiring diagram as noted in full
Installaon Manual
6. Weld Duct connecon on top of Hood at area which does not
interfere with bracing inside truck
7. Cut hole in Hood at duct connecon – See Figure #1, Item #7
8. To cut the hole properly in the roof of truck – See Figure #1
a. Li hood in the locaon where it will be mounted, ensuring
there is adequate room available to install the hood and all
ductwork to comply with proper clearances from combusble
material (Item # 1)
b. Bring duct in contact with top of truck (Item # 5)
c. Mark locaon of duct on truck roof
d. Lower hood back down
e. Cut hole in roof of truck (Item # 7)
9. Mount Roof Curb with Curb plate on top of truck
(Items # 3 & 4)
10. See aached instrucons for using Concession Hood Bolt Kit to
complete hood aachment
11. Curb Plate securing
a. Cut Curb Plate hole where duct meets plate to ensure ght t
b. Secure Curb Plate to top of Roof Curb
12. Install and secure fan on top of Roof Curb (Item # 2)
13. Wire power to Fan
14. Use Sealant around roof curb and any holes which were made during the installaon process
IMC, NFPA96 and local authories having jurisdicon may call for a minimum clearance (typically
18 inches for type 1, grease rated hoods) between the cooking hood(s), exhaust ducts, and building
materials which are combusble. However, IMC and NFPA96 do outline acceptable clearance
reducon methods; most local jurisdicng authories will accept the clearance reducon methods
approved in the manufacturer’s UL lisng for Type 1, grease rated hoods.

Product specificaties

Merk: Halifax
Categorie: Afzuigkap
Model: FTFHP930

Heb je hulp nodig?

Als je hulp nodig hebt met Halifax FTFHP930 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afzuigkap Halifax

Halifax

Halifax LBSHP1023 Handleiding

9 Juli 2023
Halifax

Halifax LEXHP1848 Handleiding

5 Juli 2023
Halifax

Halifax LBSHP1223 Handleiding

5 Juli 2023
Halifax

Halifax HRHP648 Handleiding

2 Juli 2023
Halifax

Halifax FTHI740 Handleiding

29 Juni 2023
Halifax

Halifax HRHP1048 Handleiding

26 Juni 2023
Halifax

Halifax LSCHP648 Handleiding

25 Juni 2023
Halifax

Halifax FTHI840 Handleiding

22 Juni 2023
Halifax

Halifax FTHP830 Handleiding

22 Juni 2023
Halifax

Halifax PSPHP548 Handleiding

22 Juni 2023

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap

IKEA

IKEA LAGAN 304.660.02 Handleiding

2 Mei 2024
IKEA

IKEA ALLMÄNBILDAD 704.621.44 Handleiding

2 Mei 2024
Bauknecht

Bauknecht BHVS 91F LT DP K Handleiding

27 April 2024
Venmar

Venmar Jazz VJ603302SS Handleiding

25 April 2024
Blomberg

Blomberg BIRC24102SS Handleiding

25 April 2024
Bosch

Bosch DWK67FN20 Handleiding

21 April 2024
Euro Appliances

Euro Appliances EA90SX2 Handleiding

20 April 2024
Euro Appliances

Euro Appliances E276IFBM Handleiding

20 April 2024
Emilia

Emilia CK75UCF Handleiding

17 April 2024
Fisher And Paykel

Fisher And Paykel HS90CSX3 Handleiding

17 April 2024