Haier HWT80MW2 Handleiding

Bekijk gratis de handleiding van Haier HWT80MW2 (2 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 44 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Haier HWT80MW2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Introduction

Thank you for purchasing Sonance Rock Speakers. When properly

installed, these speakers will provide you with years of outdoor

entertainment pleasure. To get the most out of your new speakers,

please read this manual thoroughly before you begin installation.

Box Contents

Sonance Rock Speaker boxes contain two (2) Rock Speakers.

Connecting the Speakers

1.Determine the locations for the speakers and estimate the

length of additional wire you will need for each speaker.

(Sonance Rock Speakers feature a wide angle of coverage —

only a few speakers are needed to cover a large area with

sound.)

NOTE: WHEN PURCHASING ADDITIONAL WIREONANCE, S

STRONGLY RECOMMENDSUSINGDIRECT BURIALGRADEWIRE.

2.Dig a 4” – 5” deep trench to run the speaker wires in.

3.Run the wire through the trench from your amplifier to the

speaker locations. Do not connect the wires to the amplifier

at this time.

4.Connect the speaker wires you ran from your amplifier to

the wires that came attached to the speakers (see Figure 1).

Sonance recommends using waterproof wire nuts

(not included) to secure the wires.

IMPORTANT: BESURENOTTOLET ANY STRAYAND‘+’ ‘–’

STRANDS TOUCH EACH OTHEROUCHING STRANDS CAN CAUSE. T

A SHORT-CIRCUIT THAT COULDDAMAGEYOUR AMPLIFIER.

5.After you have made the above connections, connect the

wires to your amplifier.

NOTE: CONFIRMTHATYOUHAVECONNECTED SPEAKER“+” TO

AMPLIFIERAND SPEAKERTO AMPLIFIER“+” “–” “–”.

6.Turn your amplifier on and test the system with your favorite

music. If the speakers are operating properly, refill the wire

trench and enjoy your new speakers.

Specifications

R K 8 3

Tweeter:1” (25mm) polyurethane dome,

ferrofluid-cooled

Woofer:8” (203mm) polypropylene cone with

a Santoprene™ surround

Frequency Response:40Hz – 20 kHz ±3dB

Impedance:8 ohms nominal; 6 ohms minimum

Power Handling:5 watts minimum; 150 watts maximum

Sensitivity:90dB SPL (2.83V/1 meter)

Available Finishes:Granite; brown

Dimensions (WxHxD):145

/8” x 14¼” x 17¾”

(372mm x 362mm x 451mm)

Shipping Weight:35 lbs (15.8kg) pair

R K 6 3

Tweeter:1” (25mm) polyurethane dome,

ferrofluid-cooled

Woofer:6½” (165mm) polypropylene cone

with a Santoprene™ surround

Frequency Response:50Hz – 20 kHz ±3dB

Impedance:8 ohms nominal; 6 ohms minimum

Power Handling:5 watts minimum; 100 watts maximum

Sensitivity:89dB SPL (2.83V/1 meter)

Available Finishes:Granite; brown

Dimensions (WxHxD):11” x 10½” x 14”

(279mm x 267mm x 356mm)

Shipping Weight:28 lbs (12.6kg) pair

Twist

Wires

Together

Waterproof

Wire Nuts

From SpeakerTo Amplifie

r

INS TRUCTION MA NUAL

S O NAN C E ®LANDSCAPE SERIES

RK83, RK63ROCK S PE AK E R S

FR SIGURE 1: CONNECTING THEOCKPEAKERS

Product specificaties