Hager JF130VMF Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hager JF130VMF (1 pagina's) in de categorie Elektriciteit meiter. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 67
1
Metering
Meter Voltage Supply Cables
Metering
Voltage supply Cables with
Fuses
For the supply to the panel Mounted meters or
DIN rail pluggable Meters in the Panel board
meter enclosure range.
The voltage to meter fuse packs consist of a 1500mm cable set that will
have the ring terminals terminated on the main phases L1, L2, L3 and
Neutral of the busbar system in either the JN or JF panel board.
The fuse carriers consist of 4 fuses rated at 3A 250V suitable for the
connection of up to 36 meters, the fuses are mounted on a short section of
din rail that can be mounted in the most convenient position in the panel
board chosen.
The opposite side of the fuse is the pluggable cable to connect into the first
meter (voltage in) and then can be daisy chained into other meters if
required using the meter to meter supply cables listed online or in the
commercial catalogue.
JN130MF with M8 ring terminals for use with the 250A JN panel boards.
JF130MF with M12 ring terminals for use with 400A to 800A panel boards.
Description Cat ref.
1.5M Voltage Supply Cable With Fuse Carrier (For JN Meter Enclosure System) JN130VMF
1.5M Voltage Supply Cable With Fuse Carrier (For JN Meter Enclosure System) JF130VMF
For use in the Panel board meter enclosure system


Product specificaties

Merk: Hager
Categorie: Elektriciteit meiter
Model: JF130VMF

Heb je hulp nodig?

Als je hulp nodig hebt met Hager JF130VMF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden