Hager BF163T Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hager BF163T (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1
6B 5025.a
6B 5025.a
BD163T, BE163T, BF163T
4
OFF
A
B
1 2 mm
C
Open slider
PZ2
Tighten the 3 MCB
screws before
cover closing
A
B
B
Push strongly
to close
properly
Ensure the plastic flap is closed
before mounting the device
into the enclosure
PUSH
1
2 3
GB
E lectrical connection
in
N
out Nin
N
out N
I I
L1
L2
L3
L1'
L2'
L3'
N'
N
{
IN
I N
{
OUT
L1
L2
L3
L1'
L2'
L3'
{
IN
{
OUT
3Ph + N
3Ph
Flexible cable
6 - 40 A :10 mm2
40 - 63 A : 16 mm2
14 mm max.
Multi-core cable
6 - 40 A :16 mm2
40 - 63 A : 25 mm2
Mounting MCB + AOB = RCBO
4 5 Push the grey button
to comply with product standard
IEC 61009-1 Annex-G.
When button pushed
MCB + AOB = RCBO
(slider is locked)
WARNING : Installation by qualified
contractors only
RCD add-on block (AOB) User instructions
for MCB:
• NBNxxxA
• NCNxxxA
• NDNxxxA
www.hager.com 2 6B 5025.a
Hager 11.2012
Test
OFF
W ARNING: Disconnect wires before any
insulation test, stick the label with the red
indication on the side of the panelboard
A
B
D
C
Mounting into panelboard
Test
Press test button :
RCBO must trip
PUSH
PUSH
1 2
A
B
3
OCOM 115161
For removal of AOB from MCB,
insert screwdriver, push grey lock
button up.
This allows slider to be open
again. The AOB remains usable.
§Warranty
NOT APPLICABLE FOR AUSTRALIA
A warranty period of 24 months is offered on hager
p roducts, from date of manufacture, relating to any material
o f manufacturing defect. If any product is found to be
defective it must be returned via the installer and supplier
(wholesaler). The warranty is withdrawn if:
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary
to IEE wiring regulations and accepted practice within the
industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when
returning goods.


Product specificaties

Merk: Hager
Categorie: Niet gecategoriseerd
Model: BF163T

Heb je hulp nodig?

Als je hulp nodig hebt met Hager BF163T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hager

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd