Gude TK 2400 ECO Handleiding

Gude Zaagmachine TK 2400 ECO

Lees hieronder de 📖 handleiding in het Nederlandse voor Gude TK 2400 ECO (16 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

#55166

TK 2400 ECO

English GB 18

Translation of original operating instructions

Circular saw bench

Unit

Mobile bench circular saw with a quality aluminium stop and a plastic mitre cut stop, height readjustment and mitre adjustment by a

hand wheel.

Accessories (standard): table extension (removable 250 mm) of steel powder colour coated. Dust exhaust, saw disc of sintered metal,

sliding guide rod, emergency switch, stop bar with millimetre scale, unit with base.

Appropriate accessories: spare saw disc (55163).

Scope of use: ideal for construction sites and indoor work.

Scope of Delivery

Fig. 1

1. Saw bench

2. Legs (4 pcs)

3. Prop to attach the extension (4 pcs)

4. Fixing/mounting material ( 8, 9, 10)

5. Props (4 pcs)

6. Props (4 pcs)

8. Cup headed bolt (32 pcs)

9. hexagon nut (32 pcs)

10. Washer (32 pcs)

11. Sliding guide bar

12. Saw disc cover

13. Mitre cut stop

14. Exhaust hose

15. Parallel stop

16. Bench extension

Fig. 2

1. Saw disc cover

2. Saw disc

3. Mitre cut stop

4. Bench extension

5. Bench extension prop

6. Parallel stop clamping lever

7. Scale

8. Base

9. Saw disc height readjustment

10. Saw disc turning readjustment

11. Emergency switch

12. Turning readjustment lock lever

13. Magnifying glass

14. Mitre cut stop

15. Exhaust hose

16. Exhaust throat

17. Cutting wedge

18. Saw disc

19. Sliding guide rod

Guarantee

The guarantee exclusively applies to material or manufacturing defects. The original proof of purchase with the purchase date must be

submitted when lodging a claim in the guarantee period. The guarantee does not include any unauthorised use, e.g. appliance

overloading, violent use, damage by a third party or foreign item. The failure to follow the Operating Instructions and assembly

instructions and common wear and tear are not covered by the guarantee either.

General Safety Instructions

Prior to the initial use of the unit, the operating instructions should be read completely. If in doubt with regard to connection and

operation of the unit, consult the manufacturer (servicing department).

FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN ORDER TO SECURE A HIGH DEGREE OF SAFETY:

Caution: Always operate with an FI (faulty current protection switch )!

Caution!

• Keep your workplace clean and tidy.

Disorder at the worksite and bench in

creases the risk of accidents and injuries.

• Mind the conditions you work in. Never use electric tools in rainy weather. Never use the electric tools in moist and wet

surroundings. Provide for good lighting. Do not use the electric tools in the proximity of flammable liquids and gases. Do not

expose the electrical tools to rain or high air humidity.

• Do not let other persons access the unit. Visitors and watchers, children and sick or inform persons should be kept at a safe

distance from your workplace.

• Provide for safe storage of the tools. The tools out of use should be stored at a dry elevated place and lock them not to be

accessed by the others.

• Use the correct tool for corresponding job.

For example, do not use small tools and

accessories for the jobs that should be

done by the big ones. Do not use the tools for purposes and works, which they have not been designed for. Keep your tools

clean and sharp.

• Wear suitable clothing. Do not wear loose clothing or jewellery, they could be caught with moving parts. When working

outdoors, rubber gloves and antiskid boots are recommended. If your hair is long, protective hairnet should be worn.

• Use personal protection equipment. Wear protective goggles and ear protectors. Wear a dustproof respirator. Always wear

tight-fitting gloves when handling sharp edges and saw discs.

• Use a dust exhauster. If dust exhaust and collection of dust devices are available, the must be fitted on and used correctly.

Make sure the dust and sawdust are taken away from you and the others standing near the unit.

• Look out for power cable. Do not pull the cable. Do not use it to unplug. Keep the cable away from the sources of heat, oil and

sharp edges.

• Effect the safety of the piece to be worked.

Use suitable clamps etc. It is always be

tter and safer than to hold it with hand. In

addition, you have both your hands free to work. .

• Mind your balance and safe posture. Never lean over too far to the side when you are trying to reach something.

• Remove any wrenches and spanners. All the wrenches and spanners used for replacing a tool, should be removed before

switching off.

• Avoid any unintentional switching on . Before plugging the unit, remember to switch it off by the unit switch.

• When working outdoors, use special extension cables only.

You need special extension cables

for the use outdoors, they

are fit to the purpose and marked appropriately.

• Be attentive at any time. Mind what you are doing. Use common sense at work. Do not use electrical tools when you feel

tired.

• Look out for damaged parts. Check the unit through before use. Are any parts da

maged? If the damage is slight only,

consider if the operation of the unit will still be safe and perfect. Mind the correct adjustment and setting of moving parts. Do

some elements fail to fit correctly in the others? Are some of them damaged? Is everything installed properly? Are any other

conditions of the unit perfect functioning met? Any damaged protective devices etc. have to be repaired or replaced by

authorised serviceman, unless otherwise stated in the operating manual. Have the defective switches replaced in an authorised

workshop. Do not use the tool, if the switch cannot be put on and off as appropriate. Replace the bench inset, if worn. In an

unlikely case that defects are found on the unit (protective devices and saw disc included), kindly consult a local servicing centre.

• Get protected from electric shock. Avoid any contact of the body with grounded parts, such as pipes,

heating radiators, stoves, and refrigerators.

• Use approved parts only. Use identical spare parts only for maintenance and repairs. Consult an authorised servicing centre.

• Warning! Use of accessories and additions other than expressly recommended in this manual may result in a risk for persons

and property.

• Caution: Use a sliding guide bar at any work.

Before putting the saw in operation, make sure that no parts are damaged and no parts and protection devices are

missing. If they were, the saw should not be operated.

Emergency Action

Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from

more accidents and calm him/her down.

Signs on Unit

Meaning of Symbols

Symbols shown below are used throughout this manual and/or on the unit :

Product specificaties

Merk:	Gude
Categorie:	Zaagmachine
Model:	TK 2400 ECO
Gewicht:	25000 g
Breedte:	950 mm
Diepte:	640 mm
Hoogte:	900 mm
Snoerlengte:	1.9 m
Geluidsniveau:	95 dB
Gewicht verpakking:	24940 g
Input vermogen:	1500 W
Stationair toerental (max):	5700 RPM
Mes doorsnede:	254 mm
Snij-diepte (90º):	75 mm
Saw blade included:	Ja
Stationair toerental:	5500 RPM
Snij-diepte (45º):	48 mm
Tafelbreedte:	946 mm
Diepte tafel:	640 mm
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Aantal tanden:	24