Gtech CCD001 Handleiding
Gtech
Niet gecategoriseerd
CCD001
Bekijk gratis de handleiding van Gtech CCD001 (18 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Gtech CCD001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/18
OPERATING MANUAL
Model number: CCD001
Cordless Combi Drill
4614_Drill_manual_aw.indd 14614_Drill_manual_aw.indd 1 28/10/2020 16:3328/10/2020 16:33
2
IMPORTANT SAFEGUARDS:
IMPORTANT: To avoid serious personal injury, do not attempt to use this
product until you read the manual thoroughly and understand it complete-
ly. Save this manual and review frequently for safe operation and instruct-
ing others who may use this tool. Keep this manual for the safety warnings,
precautions, operations, inspections and maintenance information. Store
this manual and the receipt in a safe and dry place for future reference.
WARNING: The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. Please be aware of the
potential hazards, and take all necessary precautions to avoid risk of injuries.
Work area:
• Keep the work area clean and well
lit. Cluttered benches and dark areas
increase the risk of accidents.
• Do not operate the tool in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust. The
tool could create a spark which may
ignite flammable liquids, gases or dust.
• Keep bystanders, children, and others
away while operating the tool. Distrac-
tions could result in improper use and
cause injury.
• Always Keep proper footing and
balance. Proper footing and balance
enable better control of the tool in
unexpected situations.
• Do not use on a ladder or unstable
supports. Stable footing on a solid
surface enables better control of the tool
in unexpected situations.
Personal safety:
• Always wear eye protection. Operator
and others in the work area should
always wear ANSI-Z87 .1 approved
safety goggle with side shields. Eye
protection is used to guard against
flying debris, which may cause severe
eye injury.
• Always hearing protection when using
the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
• Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing, and gloves away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
• Stay alert. Do not use tool while tired or
under the influence of drugs, alcohol,
or medication. A moment of inattention
while operating the tool may cause
serious injury.
• Avoid prolonged use. The tool’s
repetitive motion and vibration can
cause harm to your hands or arms. The
user can use gloves for extra cushion,
take frequent breaks and limit daily use
to prevent this issue.
• This tool vibrates with use. Continuous
operation can be harmful to your hands
and arms. Stop using the tool if you
feel tingling or pain. Resume work aer
recovery. Seek medical advice if serious
symptoms occur.
• Make sure there are no hidden electrical
cables, gas pipes, etc. while working
on the work piece. These hazards could
harm the user if damaged while using
this tool.
• Wash hands aer handling this product
or its power cord. They may contain
chemi cals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
4614_Drill_manual_aw.indd 24614_Drill_manual_aw.indd 2 28/10/2020 16:3328/10/2020 16:33
Product specificaties
| Merk: | Gtech |
| Categorie: | Niet gecategoriseerd |
| Model: | CCD001 |
Heb je hulp nodig?
Als je hulp nodig hebt met Gtech CCD001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Gtech
10 Februari 2025
26 Juni 2023
20 Juni 2023
17 Juni 2023
17 Juni 2023
Handleiding Niet gecategoriseerd
- Cleveland
- GPX
- Mamiya
- Toolland
- Tiptel
- Nexibo
- Vizio
- Infinity
- Kodak
- Laurastar
- JoeCo
- CAD Audio
- Ensemble Designs
- Transcend
- Tefal
Nieuwste handleidingen voor Niet gecategoriseerd
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025