Grundig Wireless Doorbell 2 Handleiding

Bekijk gratis de handleiding van Grundig Wireless Doorbell 2 (23 pagina’s), behorend tot de categorie Deurbel. Deze gids werd als nuttig beoordeeld door 94 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Grundig Wireless Doorbell 2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

a

QH-822AC

• The wireless system makes installation easy and brings eect on your interior decoration.

• The ultra-distance remote control (≥80M) meets the need of various buildings.

• Fix the pushbutton on the door with screws glass glue or dual-side sponge adhesive tape. Be sure not to let it

close to any metal subject or expose it to rain. The battery may last for one year(20 times/day).

• Plug the receiver into indoor socket of AC 230V and press the transmitter; If you want one more transmitter

to control the receiver, press code matching button on side cover, then press the button of newly added

transmitter. It indicates that newly added transmitter has been stored when you hear a doorbell sound.

You can repeat the above actions, 4 transmitters can be used at most.

• 36 melodies for option.

• The doorbell can be placed anywhere indoors. you can even move it as you like. It’s suitable for homes, oce

buildings, factories, hotels and reception halls, etc. With, you won’t miss any visitor.

• Please replace the batteries when you nd it can’t work

properly after a period of time’s use.

1. This appliance can not be used by persons(including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

2.Children should be supervised not playing with the appliance.

1.

2.

3. 6.

5.

4.

1. Set the fastening tab of the top cover into the slot of the base

2. Press here by hand to x the top cover onto the base

3. Use a minus driver to carefully open the top cover of the unit

4. Use double-sided tape to x the unit to the desired plave

5. pressing lightly the batter holder in the side

6. cr2032 3V Lithuim Battery

3.

4.

5.

6.

7.

8.

1/2/3

1.

2.

1. LED FLASHING INDICATOR

2. High Quality Loudspeaker

3. Water proof push button with LED Indicator

4. Name plate

5. RING OPTION SWITCH: ring only, or LED ash only, or combination of ring and ash

6. VOLUME SWITCH (low, medium or high)

7. TUNES SELECTION SWITCH

8. keep the code-matching button on the receiver pushed, and push the buttonof the transmitter

at te same time. Release the code-matching button on the receiver as soon as the bell rings, and

then release the button of the transmitter accordingly. In this case, the code matching of the

doorbell set is nished.

1/2/3

2.

1.

4.

3.

1. Receiver

2. wall

3. Steel Nail

4. Hang on the wall

871125248577_manual.indd 111-09-12 12:49

Product specificaties