Grandstream GXP2130 v2 Handleiding

Grandstream Telefoon GXP2130 v2

Lees hieronder de 📖 handleiding in het Nederlandse voor Grandstream GXP2130 v2 (1 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

Grandstream

GXP2130/2140/2160/2135/2170

IP Phone

Quick User Guide

Basic Phone Operation

For detailed information please

consult the GXP2130/2140/2160/2135/2170

User Manual

available at:

www.grandstream.com

reserved.

Reproduction or transmittal of the entire or any

part, in any form or by any means, electronic or

print, for any purpose without the express

written permission of Grandstream Networks,

Inc. is not permitted. Information in this

document is subject to change without notice.

USING THE HEADSET OR SPEAKER

1) Use the Speaker Button to turn

speaker ON/OFF.

2) Use the Headset button to use

the headset once it had been connected.

MAKING A CALL

1) Take Handset/Headset off hook or press -

Speaker button or an available LINE key

(activates speakerphone) .

2) The line will have dial tone and the

corresponding line’s LED will turn green.

3) If you wish, select another LINE key

(alternative SIP account).

4) Enter the phone number.

5) Press the SEND button or press

the “DIAL” soft key.

REDIAL

1) Take the phone off hook.-

2) Press the SEND button or press

the “REDIAL” soft key.

Note: The phone will redial using the

same SIP account as was used for the last

call.

ANSWERING CALLS

Single Incoming Call:

1) Answer call by taking Handset/Headset

off hook or pressing SPEAKER or by

pressing the corresponding account LINE

button.

Multiple Incoming Calls:

1) When there is a call waiting, users will

hear a Call Waiting tone .

2) The next available line will flash red.

3) Answer the incoming call by pressing its

corresponding LINE button.

4) The current call will be put on hold.

5) Toggle between the calls using the LINE

button.

ENDING A CALL

End a call by pressing the “EndCall” soft key

or hang up the phone.

CALL HOLD/RESUME

1) Hold: Place a call on ‘hold’ by pressing

the hold button.

2) Resume: Resume call by pressing the

corresponding blinking LINE.

CALL TRANSFER

Assuming that you are in a call and wish to

transfer the call to another party.

Blind Transfer:

1) Press transfer button.

2) Dial the number and press the send button

to complete transfer of active call.

Attended Transfer:

1) Press an idle line key to make a new call and the

active LINE will be placed on hold automatically.

2) Once the call is established, press transfer

button followed by the LINE button of the held line to

transfer the call.

3) After the call is transferred, phone will display idle

screen.

Auto Attended Transfer:-

1) Set "Auto Attended Transfer" to "Yes" on Web -

GUI.

2) Establish one call first.

3) Press transfer key to bring up a new line,

and the first call will be placed on hold automatically.

4) Dial the number and press SEND button

to make a second call.

5) Press transfer key again to make the transfer.

Note: For Auto Attended Transfer, after dialing out -

the number for the second call, a “Split” soft key will

show. If the second call is not established yet

(ringing), pressing “Split” will hang up the second

call. If the second call is established (answered),

pressing “Split” will resume the second call and keep

the first call on hold.

3 WAY CONFERENCE-

Initiate a Conference Call:

Assuming that you are already in a conversation and

wish to bring a third party together in a 3 way -

conference.

1) Press conference button to bring

up conference dialing screen.

2) Dial the third party number followed by

SEND key.

3) When the call is established to the third

party, press the “ConfCall” soft key to initiate 3

- way conference.

Cancel a Conference Call:

1) Press “Cancel” soft key in conference

dialing screen to resume the two way -

conversation.

Hold The Conference:

1) Press hold button to hold the

conference call with all parties are on hold;

2) Press “ReConf” soft key to resume

conference call; or select the corresponding

blinking LINE to speak with an individual party.

End The Conference:

The conference will be terminated for all three

parties if the conference initiator hangs up or

presses “EndCall” soft key.

VOICEMAIL MESSAGE

A blinking red MWI (Message Waiting

Indicator) indicates a message is waiting.

1) Press the Message button to retrieve the

message. An IVR will prompt the user

through the process of message retrieval.

2) Press a specific LINE to retrieve messages

for a specific line account.

Note: Each account requires a voicemail

portal number to be configured in the

“voicemail user id” field.

MUTE/DELETE

1) Press the MUTE button to mute/

unmute the microphone.

2) The Mute icon indicates whether the

microphone is muted.

VOLUME ADJUSTMENTS

Use the volume button to

adjust the ring volume when the phone is idle.

Press the volume button during an active call

to adjust the call volume.

Product specificaties

Merk:	Grandstream
Categorie:	Telefoon
Model:	GXP2130 v2
Kleur van het product:	Black, Grey
Gewicht:	810 g
Breedte:	193 mm
Diepte:	211 mm
Hoogte:	85 mm
Gewicht verpakking:	1440 g
Bluetooth:	Ja
Beeldscherm:	TFT
Beeldschermdiagonaal:	2.8 "
Resolutie:	320 x 240 Pixels
Bluetooth-versie:	2.1+EDR
Ethernet LAN:	Ja
Luidspreker:	Ja
Wachtstand:	Ja
Gesprek in de wacht zetten:	Ja
Conferentiegesprek mogelijk:	Ja
Aantal USB 2.0-poorten:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Volumeregeling:	Digitaal
Certificering:	FCC Part 15 ClassB, EN55022 ClassB, EN61000-3-2, EN61000-3-3, EN55024, EN60950-1, EN62479\nRCM: AS/ACIF S004; AS/NZS CISPR22/24; AS/NZS 60950
Aansluiting voor netstroomadapter:	Ja
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3af
Camera voorzijde:	Nee
Frequentie:	50 - 60 Hz
Ondersteunde netwerkprotocollen:	SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DHCP, PPPoE, TELNET, TFTP, NTP, STUN, SIMPLE, LLDP, LDAP, TR-069, 802.1x, TLS, SRTP, IPv6
Aantal handvatten opgenomen:	1 stuk(s)
Quality of Service (QoS):	Ja
DHCP client:	Ja
Power over Ethernet (PoE):	Ja
Handset type:	Handset met snoer
Capaciteit telefoonboek:	2000 entries
Opnieuw bellen:	Ja
Full duplex:	Ja
Lijn-kwantiteit:	3 regels
Aantal items in belgeschiedenis:	500
Wifi:	Nee
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Type product:	IP Phone
Ethernetkabel:	Ja
Gesprekken naar een andere telefoon omleiden:	Ja
Oproep opname:	Ja
Bel park:	Ja