GPX PJSI900 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GPX PJSI900 (4 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Indoor Projector Screen
User’s Guide for Model PJSI900 v2349-01
For the most up-to-date version of this User’s Guide, go to www.gpx.com
2
Overview
Tripod Legs
Screen Back
Screen Hanger
Hanger Hook
Carry Handle & Lock
Stowed Position
Extension Lock
Positioning the Screen
It is advised that you position the screen in an areas free
from direct light. Too much excess light will blur the
image from the projector.
Only place the screen on a level surface. If mounting to a
wall, it is advised to mark out the area before installation
(mounting hardware not included).
Do not fold or bend the screen.
Clean with a dry towel. Do not use chemical agents or
solvents, as they may damage the screen material.
Features
• 90" diagonal screen
• Wide scree 16:9 aspect ratio
• PVC screen material
• Steel tube frame
Includes
• Screen & Frame
3
NOTE: Disassembly is the reverse of setup.
Setup & Disassembly
2
Raise
Unlock
3
4Attach
Hanger
Lock
6
Lock
Raise
Place the screen in an upright position on the
ground and fully extend the legs by pushing
downward on the tripod joint.
Rotate the screen housing 90°. Disengage the lock on the carry handle and lower
the screen housing to the desired height, then
re-engage the lock.
First, unlock the vertical extension shaft and raise
it upwards so that it clears the catch at the end of
the screen housing.
Extend the screen upwards and attach the hanger
to the hook on the top of the shaft.
You can further adjust the height by adjusting the
vertical extension shaft. Be sure to engage the lock
once the desired height is reached.
1
3
5
2
4
6


Product specificaties

Merk: GPX
Categorie: Projectiescherm
Model: PJSI900

Heb je hulp nodig?

Als je hulp nodig hebt met GPX PJSI900 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden