GoldAir GCV330 Handleiding

GoldAir Heater GCV330

Lees hieronder de đź“– handleiding in het Nederlandse voor GoldAir GCV330 (5 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Operating Instructions
Convector Heater
With Fan and Timer
Model: GCV330
General Care and Safety Guide
Thank you choosing a Goldair Convector Heater. This Goldair Heater for
has been designed and manufactured high standards engineering to of
and with proper use and care, described this leaflet, will give you as in
years useful service. Please read these instructions carefully. of
TECHNICAL SPECIFICATION
Model No: GCV 330
Supply: - VAC 230 240 50Hz
Wattage: -2000W 1900
1. Use only the voltage specified the rating on
label of the appliance.
2. Keep objects least 1 metre from the front, all at
sides and rear the appliance. not place of Do
appliance close to radiant heat source.
3. Do not operate areas where petrol, paint in or
other flammable liquids are used or stored.
4. Do not insert allow foreign objects enter or to
any ventilation exhaust opening, this may or as
cause electric shock, fire damage the an or to
appliance. sit Do not on the appliance.
5. Do not operate this appliance with a damaged
cord, plug after the appliance malfunctions or or
has been dropped damaged any manner. or in
Return a qualified electrical person for to
examination, electrical service or . repair
6. This appliance intended for household use is
only and not for commercial or industrial use.
7. Use this appliance only described this as in
manual. Any other use not recommended is by
the manufacturer and may cause fire, electrical
shock injury. or
8. The common cause overheating deposits of is
of or dust fluff the appliance. Ensure these in
deposits are removed regularly unplugging by
the appliance and vacuum cleaning the air vents
and grills .
9. Do not use abrasive cleaning products this on
appliance. Clean with a damp cloth (not wet)
rinsed hot soapy water only. Always remove in
plug from the mains supply before cleaning.
10. not connect the appliance mains supply Do to
until completely assembled and adjusted.
11. Switch off and use handles provided when
moving.
12. not operate with cord set coiled a heat Do up as
build likely, which could sufficient up is be to
become a hazard.
13. recommended that this heater plugged It is is
directly into the wall socket. Power boards are
not rated supply power high wattage to to
appliances.
14. A correctly specified, undamaged extension
cord may used with this heater provided be it is
used in a safe manner.
15. not remove plug from power socket until the Do
appliance has been switched off.
16. not remove plug from power socket Do by
pulling cord; always grip plug.
17. Always appliance when use. unplug not in
18. not locate the heater directly below Do any
power socket during operation.
19. not twist, kink wrap the cord around the Do or
appliance, this may cause the insulation as to
weaken and split. Always ensure that all cord
has been removed from any cord storage area
and is unrolled before use.
20. This appliance not intended for use is by
persons (including children) with reduced
physical, sensory mental capabilities lack or or
of experience knowledge, unless they and are
supervised have been given instruction or
concerning the use the appliance a person of by
responsible for their safety.
21. not use this appliance the immediate Do in
surrounds a bath, a shower, a swimming of or
pool other liquids. The appliance must not or be
immersed in liquids any .
22. When the appliance been unpacked, check has
if for transport damage and ensure all parts
have been delivered. parts are missing the If or
appliance has been damaged, contact the
Goldair Customer Services Team.
23. your appliance does not work, If or is not
working properly, contact the place purchase of
or the Goldair Customer Services Team. Repair
work the appliance on by unqualified persons
can cause serious risk the user. to
24. There are user serviceable parts installed no in
the . unit
25. not place the unit wardrobes other Do in or
enclosed spaces this may cause fire as
hazards.
26. This unit not supposed used is to be in or
around locations where foodstuffs, works art of
or delicate articles of science, etc stored. are
27. Indoor use . only
28. Children should supervised ensure that be to
they do not play with the appliance.
29. Ensure heater a flat, stable, heat-resistant is on
surface.
30. important that you It is do not cover this heater.
Operating your Convector Heater
HEAT CONTROL SWITCH
The control switch positions : are
I+ - Heat with fan Low
II+ - High Heat with fan
0 Off –
I - H Low eat
II - High Heat
Check that the heat control switch set Off is to
position before plugging the heater into the mains
supply. For greater economy, use the High Heat
setting initially then switch the L Heat and to ow
setting.
THERMOSTAT
Turn the thermostat knob clockwise until you
reach the maximum temperature the on
graduated scale. When the desired room
temperature reached, slowly turn the knob anti-is
clockwise until the heater turns off (you will a hear
click). The heater will now cycle and off on to
maintain the set temperature.
SAFETY DEVICE
This appliance has two protection devices:
The first device automatically disconnects &
reconnects the appliance at a -set pre
temperature.
The second safety device disconnects the
appliance permanently in case of overheating, by
means of a thermal fuse (it is non resettable ).
IMPORTANT! NEVER COVER THIS HEATER
Do not use this heater with a programmer,
remote-control system, separate timer or any
other device that switches the heater on
automatically.
Always choose a safe location heater, keeping mind safety for the in the
precautions outlined. Ensure packaging has been removed from all the
unit before use. This appliance requires installation, should used no it be
solely a portable appliance. as
WARNING Keep all objects least 1 metre at
from the front, sides and rear the appliance. of
PLEASE NOTE: this product fitted with a As is
Timer, the Timer has been set the to “ON”
position. Please refer the Timer section for to
setting instructions.
ASSEMBLING YOUR HEATER
Before using the heater the feet (supplied
separately the carton), must fitted the in be to
unit. These attached the base the are to be to of
heater placing the lugs the feet the by on in
bottom the heater side mouldings. The ends of
screw pack attach the feet your heater will to to
be of taped either one to the feet for your heater,
or head taped the plug to .
Goldair New Zealand –
Monday – Friday 8am- 5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair Australia–
Monday – Friday 8am- 5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
info@cdbgoldair.com.au
SUPPORT AND TECHNICAL ADVICE


Product specificaties

Merk: GoldAir
Categorie: Heater
Model: GCV330

Heb je hulp nodig?

Als je hulp nodig hebt met GoldAir GCV330 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater GoldAir

Handleiding Heater

Nieuwste handleidingen voor Heater