Gloria 3003 Handleiding

Bekijk gratis de handleiding van Gloria 3003 (2 pagina’s), behorend tot de categorie Rookmelder. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Gloria 3003 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation of alarm:

1. Detach the alarm from the mounting base by twisting

counter clockwise. Use the mounting base to mark the

screw holes on the ceiling. Use the enclosed screws and

plugs to install the mounting base. Once the mounting

base is installed on ceiling or wall, attach the alarm by

twisting clockwise.

127617 rev6

2.After mounting, test the alarm by pushing the test but-

ton on the top and get a loud alarm tone.

Please note: The label in the product must not be removed

as it contains important information regarding the product.

Heat alarm signal: The heat alarm has a visual and

acoustic signal. In the passive state, the LED will ash

every 48 seconds to indicate normal function. In alarm

state the LED will speed up flash, and the alarm will

emit a sweeping sound pattern design to alert oc-

cupants.

Hush function: In case of unintentional or false alarms,

push button for 2 seconds.This will mute the alarm for

10 minutes, after which time the alarm will automatically

resume its normal function.

Maintenance: Test the heat alarm at least once per

quarter, by pushing the test button. The heat alarm

should give a loud alarm tone.

Fault nding: If the heat alarm activates without visible

cause, then possible cause could be:

You may have your heat alarm too close to the cooking

hobs and stove. Try reinstalling slightly further away to

alleviate any issues.

If the heat alarm does not work, when the test button is

pushed, the probably cause is a faulty battery, and the

heat alarm must be replaced.

Other information: Do not paint the heat alarm.

Disposal: For product, please dispose properly at end

of life. This is electronic waste that should be recycled.

WARNING: All alarms should be assumed as due to

actual re and the dwelling should be evacuated imme-

diately.

WARNING: To prevent injury, this apparatus must be

securely attached to the ceiling/wall in accordance with

the installation instructions.

WARNING: Batteries shall not be exposed to excessive

heat such as shine, re, or the like. Note the local coun-

try regulations regarding installation.

The

CE mark affixed to this product confirms its compliance

with the European Directives which applytotheproduct.

Alarm condition aural signal pattern according to ISO 8201.

CAVIUS assumes no responsibility for any errors, which may

appear in this manual. Furthermore, CAVIUS reserves the

right to alter the hardware, software, and/or specifications de-

tailed herein at any time without notice, and CAVIUS does not

make any commitment to update the information contained

herein.

Developed by CAVIUS

Jens Juuls Vej 28 K,DK-8260

Manufactured in P.R.C.

Commercial reference: 3003

Developed by CAVIUS

PLEASE READ THE USER GUIDE

CAREFULLY BEFORE USE AND

RETAIN FOR FUTURE USE!

This Thermal Heat Alarm is designed for areas not suitable

for smoke alarms due to high risk of false alarms such

as; kitchens, garages or workshops.

Safety instructions:

The device comes with a 3V lithium battery. Batteries

are to be handled with care and battery powered devices

should be kept out of reach of children. Do not try to

recharge or burn the batteries.

Technical information:

Type of alarm: CAVIUS heat alarm detects

1) rapidly increased temperature level

2) absolute heat level of 58 degrees C.

Sound output: The minimum sound level is 85dB at 3

meter.

Battery: Powered by a non-replaceable 3v CR123A Lithium

battery with 10-year life (included).

Low battery indicator: A short acoustic “beep” will

sound and the LED will ash every 48 seconds when

the battery is near the end of its life. In this stage it will

continue for minimum 30 days.

The heat alarm is not active unless it is inserted in the

mounting base.

The best areas to mount the alarm:

• Areas not suitable for smoke alarms due to high

risk of false alarms

• Kitchen area

• Bathroom

• Garage or workshop

Additional alarms increase the security.

The alarm may NOT be placed:

• In rooms where the temperature goes outside

-10ºC to +50ºC.

• Bedrooms

• Lounge

• Dining room

• Hallway

• Family room

NOTE: In areas where smoldering res occur over aming

res, photoelectric smoke alarms are still the best to be in-

stalled.

Placement:

The heat alarm is designed to be installed on a ceiling

or wall. Never install directly above an oven/hob/stove.

Test/Hush button

Alarm audible alert

Mounting base

UK

Use the enclosed screws and

plugs for installation

Mark up screw holes with a pen

Minimum 50cm

from wall

Wall

Ceiling

Minimum 30cm and

maximum 50cm from

ceiling

Ceiling

Wall

Minimum 30cm

and maximum 50cm

from stove

Ceiling

Minimum 50cm

from peak

Peak ceiling

©2023 Carrier. All Rights Reserved.

All trademarks and service marks referred herein are property of their respective owners.

Product specificaties