GitUp Git 1 Actioncam Handleiding

GitUp Digitale camcorder Git 1 Actioncam

Lees hieronder de 📖 handleiding in het Nederlandse voor GitUp Git 1 Actioncam (1 pagina's) in de categorie Digitale camcorder. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
TheBasics
Microphone
Wi-Fi Status
Setting,
Wi-Fi Enable/Disable
Power ON/OFF, Mode
Video Status
Shutter/Select
MicroSD Card Slot
Photo Status
HDMI port
Mini-USB port
(supports composite A/V
cable/3.5mm stereo mic
adapter,not included)
Work Status
Display Screen
Mode
Mode
Connecting
to the GitUp APP
The GitUp App allows you to control your camera remotely using
a smartphone or tablet. Features include full camera control,
live preview, playback and video/photo download.
1.Enable the Wi-Fi
If the camera is powered on and ready to capture videos or photos,
you can press and hold the Settings/Wi-Fi button [ ] for three
seconds to turn Wi-Fi on/of f. When Wi-Fi is on, a Wi-Fi
status icon appears on the camera status screen and the blue Wi-Fi
light blinks intermittently. The Wi-Fi SSID and password are shown
on the camera screen, and the default password is 12345678.
Notice: When the Wi-Fi is enabled, the camera is waiting for the
Wi-Fi connection with smartphone or tablet, and you can not take video
or photo until the connection established.
2. To Connect your camera to the GitUp APP:
a). Download and install to your smartphone/tablet the supported
GitUp application from the Apple App Store or Google Play
b). Power on the camera and enable the Wireless
c). Connect to the Wi-Fi connection named Gitup****
( the stars are dif ferent for each camera )
d). Open the application, click the [ ] to add the camera, the
application will automatically search for a camera and show
"Add device succeeded" on the screen if connected successfully.
e). Click the [ ] icon to live preview the video.
POWERING CAMERA ON AND OFF
To Power On: Press the Power/Mode button [ ] for two seconds.
To Power Of f: Press and hold the Power/Mode button [ ] for four seconds.
Mode
Selecting
Camera Modes
1. Press the Power/Mode button [ ] repeatedly to cycle through the
camera modes.
CameraModes Description
Video Video, Time Lapse Video, Video + Photo,
Video Looping
Photo Single,TimeLapsePhoto
Playback Play content on the camera or a TV
Setup Adjustgeneralcamerasettings
2. If necessary, select a dif ferent capture mode:
a) Press the Setting/Wi-Fi button [ ] to open the settings menu.
b) Press the Shutter/Select button [ ] repeatedly until you get
to the desired capture mode.
c) Press the Setting/Wi-Fi button [ ] to close the settings menu.
Mode
Mode
Getting Started
CHARGING THE BATTERY
O
P
E
N
Press and hold this part to unlock the knob,
then rotate to open or close. Please follow
the arrows for the right direction
1. Remove the camera from the waterproof housing
(if it's in the waterproof housing)
2. lnsert a MicroSD card (sold separately). Class 6 or above required,
or a UHS-I card
3. Open the battery cover and insert the battery (normally a battery is
already installed)
4. Charge the battery by connecting the camera to a computer or other USB
charging adapter using the included USB cable. The camera status light turns
on during charging
NOTICE: Using wall chargers marked: output 5V 1A. If you don’t
know the voltage and current of your charger, use the included
USB cable to charge the camera from your computer or a power
bank.
Rechargeable BatteryPress to unlock the battery cover,
then push it out.
Congratulations on your new GitUp Action camera!
This Quick Start Guide will show you the basic instructions.
please read it carefully and we hope you enjoy using your new
action camera!
01 02 03 04 05
Capturing
Video and Photos
Select your camera mode, then press the Shutter/Select
button to start/stop recording or take a photo.
Take photo while recording
When the camera is recording, you can press the Power/Mode
button [ ] to take a photo.
Adjusting
Camera Settings
1. Press the Power/Mode button [ ] to cycle to your desired mode.
2. Press the Setting/Wi-Fi button [ ] to enter the Settings menu for that mode.
3. Press the Power/Mode button [ ] to cycle through the options.
4. Press the Shutter/Select button [ ] to select your desired option.
5. Press the Setting/Wi-Fi button [ ] to exit the settings menu.
Mode
Mode
Mode
06
Git1
QUICK START GUIDE
Action Camera Git1
for Action
70mm
100mm
Optional
Accessories
Flat Adhesive Mount
USB Data/Charging Cable
Accessories
(Pro Packing)
07
CH1
CH2
CH1
CH2
Battery Charger
Holder
Wrist Remote
Frame
External Microphone
FPV Cable
08
s
USB Data/Charging Cable
Waterproof Case
Curved Adhesive Mount
Connector
Lens Cover
Bike Roll Bar Mount
Screw
Lens Cover
Accessories
(Standard Packing)
Customer
Support
D_ac` mmi ,com/ gitu p.ltd
Youtub e.com/gi tup_ com
Join GitUp Community
GitUp is dedicated to providing the best possible service. To reach GitUp
Customer Support, visit gitup.com.
Facebook.com/gitup.ltd
Twitter.com/gitup_com
Youtube.com/gitup_com
Instagram.com/gitup.world
Tripod Mount
GitUP Ltd.


Product specificaties

Merk: GitUp
Categorie: Digitale camcorder
Model: Git 1 Actioncam

Heb je hulp nodig?

Als je hulp nodig hebt met GitUp Git 1 Actioncam stel dan hieronder een vraag en andere gebruikers zullen je antwoorden