Gigabyte GA-8PENXP Handleiding

Bekijk gratis de handleiding van Gigabyte GA-8PENXP (112 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Gigabyte GA-8PENXP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X/8X (1.5V).

Caution: AGP 2X(3.3V) card is not supported by Intel®845(GE/PE) /

845(E/G) / 850(E)/E7205 / 865(P/G/PE)/875P. You might experience

system unable to boot up normally. Please insert an AGP Pro 4X/8X

(1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with

2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X

(1.5V) mode by adjusting the jumper. The factory default for this card is

2X(3.3V).

The GA-8PENXP motherboards might not function properly, if you install

this card without switching the jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by

"Power Color", the graphics card manufacturer & some SiS 305 cards,

their golden finger is compatible with 2X/4X mode AGP slot, but they

support 2X(3.3V) only. The GA-8PENXP motherboards might not function

properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

fine with Intel®845(GE/PE) / 845(E/G) / 850(E) /E7205 / 865(P/G/PE)/875P.

based motherboards.

Before you install PCI cards, please remove the Dual BIOS

label from PCI slots if there is one.

AGP 4X/8X nohtc

Product specificaties