Gigabyte GA-8IEML-T Handleiding

Bekijk gratis de handleiding van Gigabyte GA-8IEML-T (81 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Gigabyte GA-8IEML-T of wil je andere gebruikers van dit product iets vragen? Stel een vraag

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X notch"(show below), please make sure your AGP card is

AGP 4X (1.5V).

Do not use AGP 2X card (3.3V) in this motherboard. It will burn

and damage the motherboard due to Intel® 845(E/G) / 850(E)

chipset can't support AGP 2X(3.3V).

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/

4X mode AGP slot. It can be switched between AGP 2X(3.3V) or

4X (1.5V) mode by adjusting the jumper. The factory default for this card

is 2X (3.3V). If you install this card in GA-8IEML-T(-C) (or any AGP 4X

only) motherboards without switching the jumper to 4X mode (1.5V), it

will burn the motherboard.

Example 2: Some ATi Rage 128 Pro graphics cards made by “Power

Color”, the graphics card manufacturer & some SiS 305 cards, their

golden finger is compatible with 2X/4X mode AGP slot, but they support

2X(3.3V) only. If you install this card in GA-8IEML-T(-C) (or any AGP 4X

only) motherboards, it will burn the motherboard.

Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage

128 Pro chip, the design of AG32S(G) is compliance with AGP 4X (1.5V)

specification. Therefore, AG32S(G) will work fine with Intel®845(E/G)

/ 850(E) based motherboards.

Product specificaties