Gigabyte GA-8I875 Handleiding

Gigabyte Moederbord GA-8I875

Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GA-8I875 (112 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/112

When you installing AGP card, please make sure the following notice

is fully understood and practiced. If your AGP card has "AGP 4X/8X

(1.5V) notch"(show below), please make sure your AGP card is AGP

4X/8X.

Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/G) /

850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system

unable to boot up normally. Please insert an AGP Pro 4X/8X card.

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X

mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode

by adjusting the jumper. The factory default for this card is 2X(3.3V). The

GA-8I875 / GA-8IK1100 (or any AGP Pro 4X/8X only) motherboards might

not function properly, if you install this card without switching the jumper to

4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",

the graphics card manufacturer & some SiS 305 cards, their golden finger is

compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support

2X(3.3V) only. The GA-8I875 / GA-8IK1100 (or any AGP Pro 4X/8X only)

motherboards might not function properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage

128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)

specification. Therefore, AG32S(G) will work fine with Intel ®

845(GE/PE) /

845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.

Before you install PCI cards, please remove the Dual BIOSlabel from PCI

slots if there is one.

AGP 4X/8X notch

The author assumes no responsibility for any errors or

omissions that may appear in this document nor does the

author make a commitment to update the information

contained herein.

Third-party brands and names are the property of their

respective owners.

Please do not remove any labels on motherboard, this may

void the warranty of this motherboard.

Due to rapid change in technology, some of the

specifications might be out of date before publication of

this booklet.

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-8I875 / GA-8IK1100

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive



 EN 55011 Limits and methods of measurement

of radio disturbance characteristics of

industrial,scientific and medical (ISM

high frequency equipment



 EN 61000-3-2*

7 EN 60555-2

Disturbances in supply systems cause

by household appliances and similar

electrical equipment “Harmonics”



 EN 55013 Limits and methods of measurement

of radio disturbance characteristics of

broadcast receivers and associated

equipment



 EN 61000-3-3* Disturbances in supply systems cause

by household appliances and similar

electrical equipment “Voltage fluctuations”



 EN 55014 Limits and methods of measurement

of radio disturbance characteristics of

household electrical appliances,

portable tools and similar electrical

apparatus

7777

7 EN 50081-1 Generic emission standard Part 1:

Residual commercial and light industry

7 EN 50082-1 Generic immunity standard Part 1:

Residual commercial and light industry



 EN 55015 Limits and methods of measurement

of radio disturbance characteristics of

fluorescent lamps and luminaries

Generic emission standard Part 2:

Industrial environment



 EN 55081-2

Immunity from radio interference of

broadcast receivers and associated

equipment

Generic emission standard Part 2:

Industrial environment



 EN 55082-2

7 EN 55022 Limits and methods of measurement

of radio disturbance characteristics of

information technology equipment

lmmunity requirements for household

appliances tools and similar apparatus



 ENV 55104

Cabled distribution systems; Equipment

for receiving and/or distribution from

sound and television signals

EMC requirements for uninterruptible

power systems (UPS)



 EN50091-2



 EN 55020



 DIN VDE 0855



 part 10



 part 12

(EC conformity marking)

7777

7 CE marking

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

Safety requirements for mains operated

electronic and related apparatus for

household and similar general use



 EN 60950



 EN 60065

Safety of household and similar

electrical appliances



 EN 60335

Manufacturer/Importer

Signature:

Name:

(Stamp) Date : August 23, 2003

7 EN 60555-3

Timmy Huang



 EN 50091-1

Safety for information technology equipment

including electrical bussiness equipment

General and Safety requirements for

uninterruptible power systems (UPS)

Product specificaties

Merk:	Gigabyte
Categorie:	Moederbord
Model:	GA-8I875
Type stroombron:	ATX
Audio-uitgang:	Realtek ALC658 CODEC
Meegeleverde software:	Norton Internet Security 2003 \nNorton Anti Virus \nNorton Personal Firewall \nNorton Privacy Control \nNorton Parental Control \nNorton Spam Alert \nGIGABYTE Windows Utility Manager \nAdobe Acrobat Reader\n
Processor socket:	Socket 478
Processorfabrikant:	Intel
Maximum intern geheugen:	4 GB
Netwerkfuncties:	IntelPRO /1000 CT Ethernet Controller
Chipset moederbord:	Intel® 875P
Afmetingen (B x D x H):	305 x 244 mm
Uitbreidingsslots:	1 x AGP Pro slot \n5 x PCI slots (PCI 2.3 compliant)\n
Moederbord form factor:	ATX