Gigabyte GA-7VT600-P-L Handleiding
Gigabyte
Moederbord
GA-7VT600-P-L
Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GA-7VT600-P-L (112 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/112
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X/8X(1.5V).
Caution: AGP 2X(3.3V) card is not supported by VIA® KT600. You
might experience system unable to boot up normally. Please insert
an AGP 4X/8X(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-7VT600-P(-L) (or any AGP 4X only) motherboards might not
function properly, if you install this card without switching the jumper to
4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power
Color", the graphics card manufacturer & some SiS 305 cards, their
golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but
they support 2X(3.3V) only. The GA-7VT600-P(-L) (or any AGP 4X only)
motherboards might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with VIA® KT600 based motherboards.
AGP 4X/8X notch
00
00 0 The author assumes no responsibility for any errors or
omissions that may appear in this document nor does the author
make a commitment to update the information contained herein.
0000 0 Third-party brands and names are the property of their respective
owners.
00
00 0 Please do not remove any labels on motherboard, thismay void
the warranty of this motherboard.
0000 0 Due to rapid change in technology, some of the specifications
might be out of date before publication of this booklet.
Safety for information technology equipment
including electrical bussiness equipment
General and Safety requirments for
uninterruptible power systems (UPS)
Declaration of Conformity
We, Manufacturer/Importer
(full address)
declare that the product
(description of the apparatus, system, installation to which it refers)
Mother Board
GA-7VT600
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
  EN 55011 Limits and methods of measurement
of radio disturbance characteristics of
industrial,scientific and medical (ISM
high frequency equipment

 EN 61000-3-2*
7777
7 EN 60555-2
Disturbances in supply systems cause
by household appliances and similar
electrical equipment "Harmonics"


 EN 55013 Limits and methods of measurement
of radio disturbance characteristics of
broadcast receivers and associated
equipment

  EN 61000-3-3* Disturbances in supply systems cause
by household appliances and similar
electrical equipment "Voltage fluctuations"

  EN 55014 Limits and methods of measurement
of radio disturbance characteristics of
household electrical appliances,
portable tools and similar electrical
apparatus
7777
7 EN 50081-1 Generic emission standard Part 1:
Residual commercial and light industry
7777
7 EN 50082-1 Generic immunity standard Part 1:
Residual commercial and light industry
  EN 55015 Limits and methods of measurement
of radio disturbance characteristics of
fluorescent lamps and luminaries
Generic emission standard Part 2:
Industrial environment


 EN 55081-2
Immunity from radio interference of
broadcast receivers and associated
equipment
Generic emission standard Part 2:
Industrial environment

 EN 55082-2
77
77 7 EN 55022 Limits and methods of measurement
of radio disturbance characteristics of
information technology equipment
lmmunity requirements for household
appliances tools and similar apparatus

 ENV 55104
Cabled distribution systems; Equipment
for receiving and/or distribution from
sound and television signals
EMC requirements for uninterruptible
power systems (UPS)

 EN50091-2

 EN 55020

 DIN VDE 0855

 part 10

 part 12
(EC conformity marking)
7777
7 CE marking
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
Safety requirements for mains operated
electronic and related apparatus for
household and similar general use


 EN 60950

 EN 60065
Safety of household and similar
electrical appliances

 EN 60335
Manufacturer/Importer
Signature:
Name:
(Stamp) Date :Jan. 9, 2004
77
77
7 EN 60555-3
Timmy Huang

 EN 50091-1
Timmy Huang
G.B.T. Technology Trading GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
..
Product specificaties
| Merk: | Gigabyte |
| Categorie: | Moederbord |
| Model: | GA-7VT600-P-L |
Heb je hulp nodig?
Als je hulp nodig hebt met Gigabyte GA-7VT600-P-L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Gigabyte
25 April 2024
11 Maart 2024
11 Maart 2024
9 Maart 2024
29 December 2023
5 September 2023
5 September 2023
5 September 2023
5 September 2023
5 September 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
8 April 2024
8 April 2024
8 April 2024
8 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024