Genelec 8331 AP Handleiding

Genelec Speaker 8331 AP

Lees hieronder de 📖 handleiding in het Nederlandse voor Genelec 8331 AP (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
8331A
Smart Active Monitor
Operating Manual
2
Introduction
Thank you for choosing a Genelec product! Fulfilling dreams by
offering people the most truthful sound reproduction possible
has been the source of our enthusiasm since 1978. There´s
already over one million Genelec monitors around the world -
welcome to our story!
All Genelec monitors are designed, hand assembled and
tested at our factory in Iisalmi, Finland. Our monitors are designed
to last for decades and we take care that our customers receive
excellent support and technical services throughout the life-time
of the products.
Please register your monitor at http://www.community.
genelec.com/. You will receive an extended 5 year warranty
for spare parts. For more information about our service and
technical support see
http://www.genelec.com/customer-service.
System Characteristics
Each 8331A is supplied with one mains power cable, one
5-meter GLM network cable and this operating manual.
The Genelec 8331A is suitable for professional monitoring
applications calling for very high precision and reliability.
It combines many remarkable Genelec technologies to
provide point source benefits with directivity control over an
extraordinarily wide audio bandwidth.
Genelec Loudspeaker Managerâ„¢ (GLMâ„¢)
Software And GLM User Kit
The GLM software gets the most out of 8341 and tailor-fits it to
your room. GLM is available for download free of charge at www.
genelec.com/glm. Check in from time to time to take advantage
of new features, or consider using the cloud-based version. A
GLM User Kit comprising the necessary hardware, including the
GLM Adapter and measuring microphone is needed for building
and operating the GLM network. This kit can be purchased at all
certified Genelec dealers.
Minimum Diffraction Coaxial (MDCâ„¢)
The minimum diffraction coaxial driver is comprised of a powerful
midrange driver combined with a tweeter driver extending to
ultrasonic frequencies. This unique arrangement eliminates or
minimizes acoustic diffraction sources that typically exist in
coaxial drivers and produces a flat frequency response both on
the acoustical axis and at all off-axis directions.
The 8331 may be oriented either horizontally or vertically and
is intended for near-field listening where the influences of the
room can be mostly minimized. Typical distances can vary from
1 meter or less to 3 meters depending on room size and SPL
requirements.
Directivity Control Waveguide (DCWâ„¢)
The 8331A has an unusually large directivity control waveguide
extending over the whole front face of the enclosure. The
midrange driver cone also forms a part of the directivity control
waveguide for the tweeter. From behind the waveguide, two
woofers radiate audio through two openings in the enclosure
front. This unique design enables directivity control of all audio
frequencies down to low bass.
Acoustically Concealed Woofers (ACWâ„¢)
A pair of nearly invisible woofers in the 8331A are placed
acoustically coaxially with the midrange/tweeter drivers to
create a three-way system with all drivers having their acoustical
axes in the same position. This creates an ideally working point
source radiator.
Smart Active Monitor (SAMâ„¢)
Genelec SAM technology can improve the reliability and accuracy
of monitoring. Smart Active Monitors have several parametric
notch and shelving filters that can be tuned automatically using
the Genelec Loudspeaker Manager (GLM) software to exactly
compensate for colorations generated by room acoustics. This
enables SAM monitors to sound neutral and achieve accurate
stereo imaging in all acoustical environments.
Audio Inputs
The 8331A’s audio inputs are designed to integrate easily into
all professional environments, supporting balanced line analog
and AES/EBU format digital signal. The maximum analog input
level is +25 dBu (13.7 Vrms or 19.5 V peak). Set to the maximum
sensitivity, an analog input signal of -6 dBu produces 100 dB SPL
sound level at 1 meter in free space. A -30 dBFS digital audio
input level produces 100 dB SPL level at 1 meter in free space.
Note that 0 dBFS refers to the largest possible digital input value.
The XLR audio input accepts both AES/EBU format digital
signal and analog line level analog audio signal. With an
extremely low level AES/EBU signal, the automatic selection
may not work properly. In such case, the signal selection can be
made in the GLM software.
When using a digital audio source with adjustable level, it
may instead be advantageous to lower the output level of the
8331A using the monitors on-board rear panel controls. This
enables the use of a higher source output level with more digital
resolution, while taking full advantage of 8331’s impressively
low self generated noise.
The AES/EBU format supports two channels of audio in a
single cable. The DIGITAL OUT male XLR connector carries an
unaltered copy of the digital input signal. This enables daisy-
chaining of up to four monitors. The proper digital channel can
be selected using DIP switches or GLM.
Power Management
The 8331A mains power input supports any mains voltage
globally (100-240 VAC, 50-60 Hz). It can be plugged in anywhere
in the world and will always deliver the maximum output power
to the drivers even when the mains voltage fluctuates. If mains
power is provided with a generator, inverter or lower-quality UPS
device, we recommend filtering out harmonics from the mains
power voltage.
The energy saving function Intelligent Signal Sensing (ISSâ„¢)
puts the monitor automatically into a deep sleep state when no
input signal is present. The device then consumes less than
one watt of power. Upon sensing an input signal, the monitor
automatically awakens. The wait time until entering the power
saving state can be configured using the GLM software. When
ISS is active, you can leave your monitors on at all times and
have the monitoring system immediately ready for action. The
default wait time when ISS is enabled using the ISS DIP switch
is 60 minutes.
3
Figure 2. Connectors and controls on the back panel of a 8331A.
Figure 1. GLM control network cabling
Figure 3. Connector panel detail.
Setup Using The
GLMâ„¢ Control Network
Although the 8331A can be used without the GLM software and
control network, it can only reach its full potential when set up
and calibrated using GLM software, running on a Mac or PC.
Genelec therefore recommends setting up the 8331A
and other SAM monitors using GLM. You can find a detailed
description of the setup and the use in the GLM System
Operating Manual.
The GLM software and the proprietary Genelec monitor
control network offer automated acoustic equalization and
alignment for any reproduction system from mono over stereo
to complex 3D immersive audio setups, including also one or
more subwoofers. GLM includes AutoCal, an expert algorithm
built on data from thousands of professional listening rooms.
Setup with the GLM User Kit consists of the following steps:
1. Connect a CAT5 (RJ45) cable between each monitor (and
subwoofer) and finally to the control network input of the
GLM Adapter device (see Figure 1).
2. Connect the GLM Adapter to computer USB connector.
3. Using a microphone stand, place the Genelec measurement
microphone at the listening location with the microphone
pointing upwards and the microphone top at the height of
the engineer’s ear. The microphone is a part of the GLM
User Kit.
4. Connect the microphone cable to the microphone input in
the GLM Adapter device.
5. Download the GLM software at the Genelec web site (www.
MICROPHONE
PLACED IN
THE LISTENING
POSITION
292-0063
GLM T ERMINA RT O
COMPUTER
RUNNING
GLM SOFTWARE
USB CABLE
GLM ADAPTER
GLM NETWORK
CABLE
MONITORS
SUBWOOFER
RESET FACTORYTO
SETT INGS: PUSH
BUTT ON FOR 10 SEC
INPUT dBu
PRODUCING
100 dB SPL (1 m)
-2
+4
+2
-4
-6
+6
dBu
0
ON
OFF
BASS ROLL-OFF
LED DISABLE
BASS TILT
A
-20 dB
B
-2
-4
-2
-4
ST ORED
(dB)
-10 dB
LEVEL
DIGITAL
TREBLE TILT +2
-4
DESKTO P 160 Hz - 4
(dB)
ISS
MADE IN FINLAND www.genele c.com
SERIAL NUMBER
This de vic e com plie s with FC C Pa rt 15 a nd Cana dia n
ICES- 003 radi o freq ue ncy C la ss B emi ss i on re qu ire m en ts.
Refer to o perati ng m a nu a for full info rm ati on.
29 312-83 T- 6
ANALOG IN
DIGI L THRUTA
AES/EBU
MAINS INPUT
50 / 60 Hz 60 W
10 240 V~0 -
8331A
COAXIAL TRI-AMPLIFIED
SMART ACTIVE MONI RTO
GLM
NETWORK
DIGITAL I N
AES/EBU
DIP SWITCHES FOR
STAND-ALONE USE
ROTARY LEVEL
CONTROL
MAINS
INPUT
GLM NETWORK
CONNECTORS
POWER
SWITCH
AUDIO SIGNAL
CONNECT
ORS:
-DIGITAL /
ANALOG IN
-DIGITAL THRU

Product specificaties

Merk: Genelec
Categorie: Speaker
Model: 8331 AP

Heb je hulp nodig?

Als je hulp nodig hebt met Genelec 8331 AP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Genelec

Genelec

Genelec 4436A Handleiding

8 Juni 2023
Genelec

Genelec 8010 AW Handleiding

29 Mei 2023
Genelec

Genelec 8040A Handleiding

24 Mei 2023
Genelec

Genelec 8050B Handleiding

21 Mei 2023
Genelec

Genelec 4410A Handleiding

5 Mei 2023
Genelec

Genelec 8050A Handleiding

4 Mei 2023
Genelec

Genelec 8320AWM Handleiding

3 Mei 2023
Genelec

Genelec 8020CWM Handleiding

2 Mei 2023
Genelec

Genelec 6010A Handleiding

28 April 2023
Genelec

Genelec 1236A Handleiding

26 April 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024