Gemini 7057 Handleiding
Gemini
Auto alarm
7057
Lees hieronder de đ handleiding in het Nederlandse voor Gemini 7057 (5 pagina's) in de categorie Auto alarm. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/5
7057
7056
...................................
...........................................................
CERTIFICAT D' INSTALLATION
INSTALLATION CERTIFICATE
EINBAUBESCHEINIGUNG
Je soussigné,installateur,certifie d'avoir fait personnellement l'installation du dispositif d'alarme
du véhicule ci décrit,conforme aux instructions du constructeur.
The undersigned,qualified installer,attests to have personally fitted the here described Vehicle
Security system following the manufacturer instructions.
Der Installateur bestÀtigt mit seiner Unterschrift, daà die Alarmanlage in dem genannten Fahrzeug
nach Vorgaben Des Herstellers eingebaut wurde.
Signature,Firma,Assinatura,Unterschrift .................................................................
CERTIFICADO DE INSTALACION
El que suscribe, instalador, certifica el haber seguido personalmente la instalaciĂłn del dispositivo
de alarma del vehĂculo descrito a continuaciĂłn, de acuerdo con las instrucciones del fabricante.
CERTIFICATO DI INSTALLAZIONE.
Il sottoscritto,installatore,certifica di aver eseguito personalmente l'installazione del dispositivo
di allarme del veicolo descritto qui di seguito,conformemente alle istruzioni del fabbricante.
No forest has been destroyed to
produce this 100% recycled paper.
by GEMINI TRADING S.r.l. Via Luigi Galvani 12 21020 Bodio Lomnago (VA) Italia
Tel. +39 0332 943211 - Fax +39 0332 948080
E-mail : info@gemini-alarm.com
By :
Da :
Par :
Von :
Por :
Sold on :
Venduto il :
Vendu le :
Verkauft am :
Vendido el :
Type of product :
Tipo di prodotto :
Produktartikel :
Type de dispositif:
Dispositivo ciclo :
Auto
Car
VĂ©hicule
Fahrzeug
VeĂculo
7208
0682
7057
7056
AC2506-REV.00/04/01
DESCRIPTION
Gemini 7057
Gemini 7057 is a compact, self-powered alarm with sensors and siren. Studied for vehicles
equipped with original transmitter and direction indicator lights flashing while opening and
closing the vehicles door.
Gemini 7056
As Gemini 7057 without self-power and engine immobilisation.
FUNCTIONS
- Control for alarm arming/disarming through the direction indicators lights and controls for the
vehicles lock actuators.
- Blinker and electronic siren.
- Perimetrical protection and volumetric protection only for Kit 7057US and Kit 7056US.
- Positive and negative control for vehicles equipped with âPack-comfortâ system.
- Engine immobilisation (only 7057).
- Negative control external additional siren.
- Automatic arming.
- Absorption sensor.
- LEDâs memory.
The alarm system is supplied with two mechanical keys for the emergency release.
INSTALLATION INSTRUCTIONS (for the installer).
- It is necessary to memorise the arming/disarming sequence controls through the direction indicator
lights after the wiring connections.
- The alarm wiring harness must be positioned away from the vehicle high voltage wires in order to
avoid interference which could generate wrong working of the system.
- On vehicles with catalytic converter, the engine immobilisation must be carried out on the fuel
pump.
- For systems with volumetric sensors (art. 7057US e 7056US), the transducers must be installed at
the top of each windscreen pillar, far from the ventilation or the conditioning air outputs.
- Note: to obtain the correct working of the automatic arming and perimetrical protection functions,
connect the GREEN -BROWN wire to the boot/door switches.
DIP SWITCHES PROGRAMMING TABLE
1 ON Current absorption sensor ON
1 OFF Current absorption sensor OFF
2 ON Passive arming ON
2 OFF Passive arming OFF
3 ON Arming/disarming acoustic signalling OFF
3 OFF Arming/disarming acoustic signalling ON
4 ON Arming/disarming control through the direction indicator lights and the
vehicle lock actuators.
4 OFF Arming/disarming control through the direction indicator lights.
ATTENTION: SELECT THE DIP-SWITCHES BEFORE TURNING THE EMERGENCY KEY TO ON.
ACCORDING TO THE RULES POSITION THE DIP-SWITCH N.1 TO OFF.
WIRING CONNECTIONS
(DISCONNECT THE NEGATIVE TERMINAL OF THE BATTERY AND ONLY RE-CONNECT AFTER THE
INSTALLATION IS COMPLETE)
FUNCTIONS WIRE COLOURS
Earth ĂȘĂȘ BLACK initialled M
Battery positive terminal ĂȘĂȘ BLACK initialled R
Engine immobilisation ĂȘĂȘ 2x GREY initialled H
Ignition live ĂȘĂȘ YELLOW
Door pin switch ĂȘĂȘ GREEN-BROWN
Boot/bonnet pin switch ĂȘĂȘ BLACK initialled V
Positive alarm armed ĂȘĂȘ PINK
Sensors inlet ĂȘĂȘ GREEN-BLACK
Negative comfort control additional siren ĂȘĂȘ YELLOW-BLACK
Positive Comfort control ĂȘĂȘ RED-BLACK
Negative Comfort control ĂȘĂȘ WHITE-BLACK
Arming/disarming control through the direction
indicator lights + Blinker. ĂȘĂȘ 2 x ORANGE
Arming Synchronism control ĂȘĂȘ YELLOW-BLUE
Disarming Synchronism control ĂȘĂȘ GREEN-BLUE
NOTE: connect always the synchronism controls (YELLOW-BLUE and GREEN-BLUE wires) to
the two polarity reversal wires of the L.H.S. actuators lock.
The wiring harness is supplied with two connectors; connect the 4 pin connectors to the ultrasonic
module and the two pin connector to the LED.
SELF-LEARNING FUNCTION OF THE DIRECTION INDICATOR LIGHTS
FLASHING SEQUENCES.
IMPORTANT: BEFORE ACTIVATING THE SELF-LEARNING FUNCTION, IT IS NECESSARY TO SELECT
CORRECTLY THE DIP-SWITCHES AND TO CARRY OUT THE WIRING CONNECTIONS. DO NOT USE THE
TRANSMITTER BEFORE HAVING ACTIVATED THE SELF-LEARNING FUNCTION.
THIS FUNCTION ALLOWS MEMORISING THE SEQUENCE OF THE DIRECTION INDICATOR LIGHTS
FLAHING WHILE OPENING OR CLOSING THE DOOR.
To activate the self-learning function proceed as follows:
- Position the alarm key to OFF.
- Turn the ignition key to ON.
- Position the alarm key to ON.
- The LED of the alarm lights.
- Turn the ignition key to OFF.
- Close the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. One audible tone signals the door closure.
Note: wait always till the audible tone before learning the door opening.
- Open the vehicle door with the original transmitter. The LED stops lightning at the first
direction indicator lights flashing. Two audible tones signal the end of the self-learning
operation of the 7057 or 7056 system.
THE ACOUSTIC SIGNALLING CAN BE OBTAINED ALSO WITH THE DIP-SWITCH
N. 3 TO ON.
WORKING DESCRIPTION
- ALARM ARMING WITH ORIGINAL TRANSMITTER: push on the closure button of the vehicle
original transmitter. The arming and the vehicles locks closure are signalled by the original
flashing of the direction indicator lights and by one beep of the alarm system (dip-switch 3 to
OFF). During the first 30 seconds from the alarm arming, the LED lights fix to show the
neutral time when all inputs are isolated. At the end of the neutral time, the LED will flash to
show the inlets activation.
NOTE: if the vehicle emergency switch is pushed it is not possible to arm the alarm. The
alarm will arm only if the direction indicator lights original system stops the emergency
flashing.
- ALARM PERIOD: the alarm phase is generated from the excitation of one or more inlets. The
alarm period is 30 seconds for each alarm cycle. The direction indicator lights flashes 5
seconds after the alarm cycle for 4 consecutive times, followed by a 5-sec. interval.
The alarm system can be disarmed with the original transmitter during the 5-sec. interval or at
the end of the alarm cycle.
- ALARM DISARMING WITH THE ORIGINAL TRANSMITTER: push on the opening button of the
vehicle original transmitter. One flashing of the direction indicator lights signal the door
opening and 3 audible tones will confirm the disarming of the system (dip-switch No. 3 to
OFF); 5 audible tones if an alarm condition has occurred.
NOTE: the alarm system will disarm only at the end of the sequence of the direction indicator
lights flashing or at the end of the 3 or 5 beeps.
SPECIAL FUNCTIONS
ALARM AUTOMATIC ARMING: This function allows the system to arm automatically 30 seconds
from the engine switching off or the door opening. To obtain this function, position the dip-
switch N°2 to ON; connect the Green-brown wire to the door pin switch and the Yellow wire to
the ignition live (+15/54).
LEDâS MEMORY. While alarm disarming it is possible to identify the alarm triggering cause.
Turning the ignition key to ON, the flashing LED will repeat the alarm triggering cause for 4
times.
LED flashing Alarm triggering Alarm cycles
YlY Absorption sensor 5
YYlYY Doors, boot and bonnet buttons 5
YYYlYYY Ignition live UNLIMITED
YYYYlYYYY External sensor (Green-Black wire) 5
l LED OFF (2 seconds) Y LED ON (1 second)
The neutral time is 30 seconds for each alarm triggering.
TECHNICAL DATA
Power supply 10,5 Ă·14,5VDC
Max. current absorption 10 mA
Working temperature -40° + 85°
Direction indicator lights contact capacity 8A a 20° C
Engine immobilisation contact capacity 8A a 20° C
Alarm cycle period 30 seconds
Max. current â positive alarm armed (+A) 1A
Max. current positive comfort 500 mA
Max. current negative comfort 100 mA
Audible tone >118dB
ULTRASONIC MODULE DESCRIPTION
5123GE (for 7057US and 7056US models)
The 5123 sensors protects the vehicle passenger compartment with ultrasonic waves; the
opening of a door or a movement inside the vehicles are detected by the sensor which triggers
the alarm.
Installation instructions
The connection of the sensor to the alarm system is easy as the alarm wiring harness is supplied
with an appropriate plug.
Put the connectors of the sensorâs ultrasonic heads in the appropriate seats: RED for the connection of
the TX head; WHITE for the connection of the RX head.
Ultrasonic adjustment
1. Lower one of the front windows approximately 20 cm.
2. Adjust the sensor to a minimum sensitivity;
3. Arm the alarm and verify that all doors are completely closed.
4. Put a hand through the open windows and move it; the LED of the module will light red.
Increase the sensitivity till the alarm triggers.
TECHNICAL DATA
Working Voltage 9Ă·16VDC
Current absorption 2,5 mA
Working temperature -30°C +85°C
Product specificaties
| Merk: | Gemini |
| Categorie: | Auto alarm |
| Model: | 7057 |
Heb je hulp nodig?
Als je hulp nodig hebt met Gemini 7057 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Auto alarm Gemini
15 Januari 2023
13 Juni 2023
12 Juni 2023
9 Juni 2023
15 Januari 2023
15 Januari 2023
7 Juni 2023
15 Januari 2023
4 Juni 2023
3 Juni 2023
Handleiding Auto alarm
- Auto alarm HP
- Auto alarm Audiovox
- Auto alarm Eufab
- Auto alarm GT
- Auto alarm Spy
- Auto alarm Technaxx
- Auto alarm Viper
- Auto alarm Waeco
- Auto alarm Jablotron
- Auto alarm Olympia
- Auto alarm Cobra
- Auto alarm Clifford
Nieuwste handleidingen voor Auto alarm
7 Februari 2024
7 Februari 2024
7 Februari 2024
6 September 2023
30 December 2022
20 Maart 2023
25 April 2023
10 Juli 2023
10 Juli 2023
10 Juli 2023