Gefen EXT-RACK-1U-GRY Handleiding

Gefen Niet gecategoriseerd EXT-RACK-1U-GRY

Bekijk gratis de handleiding van Gefen EXT-RACK-1U-GRY (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 3.7 sterren uit 18.5 reviews. Heb je een vraag over Gefen EXT-RACK-1U-GRY of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

Congratulations on your purchase of the Gefen 1U Rack Tray. Your complete satisfaction is very important to us.

This product has been designed for rack mounting of specic half-rack wide Gefen products. It helps keep your installation secure

and organized. This tray takes up just 1 Rack Unit (1U) height (1.75”), but can also accommodate lower prole as well as taller

enclosures (as long as there is clearance above the tray). For a list of compatible Gefen products, please see the EXT-RACK-1U

page at www.gefen.com

1U Rack Tray

EXT-RACK-1U

EXT-RACK-1U-GRY

QUICK START GUIDE

1. Turn the unit upside down and remove the rubber feet if attached.

Make sure you have everything that came with your product:

(1) 1U Rack Tray (EXT-RACK-1U or EXT-RACK-1U-GRY)

(1) Quick-Start Guide (QSG-EXT-RACK-1U)

Please note the following:

1. Product-to-rack mounting screws are not provided with this rack tray. If these

screws did not come with your Gefen product, you will need to purchase them

separately. Please use 6-32 at head machine screws, approximately 3/16” or

5mm long. The use of longer screws could damage your product. Such damage

will not be covered under warranty.

2. This rack tray is available in two nishes to complement a variety of Gefen

enclosures: Bronza (EXT-RACK-1U) and Metallic Gray (EXT-RACK-1U-GRY).

In case of difculties, or if you have any questions, please get in touch with the

Gefen Technical Support. Refer to the last page of this Quick Start Guide for contact

information.

Start Here

Installation

Remove Rubber Feet

QUICK START GUIDE

For a list of compatible products, please see the

EXT-RACK-1U web page at www.gefen.com

INFORMATION:

QUICK START GUIDE

2. Line up the holes on the unit and the rack tray.

3. Install the two machine screws that are either provided with the

product or need to be purchased separately.

4. Ensure that unit has been installed securely in the rack tray.

Secure product to the Rack Tray

QUICK START GUIDE

Product specificaties

Merk:	Gefen
Categorie:	Niet gecategoriseerd
Model:	EXT-RACK-1U-GRY
Kleur van het product:	Grijs
Breedte:	483 mm
Diepte:	150 mm
Hoogte:	43 mm
Aantal per verpakking:	1 stuk(s)
Rackcapaciteit:	1U
Nuttige breedte:	432 mm