Geekoto CT28X Handleiding
Bekijk gratis de handleiding van Geekoto CT28X (1 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Geekoto CT28X of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
An overview of the tripod:
Each leg of the tripod can be adjusted in three different angles to meet
different shooting requirements, as shown in the direction, press the angle
control button, at the same time, move the leg to the corresponding angle,
and release the control button.
Angle regulation:
Press
Unlock the cantral column in the direction a, stretch to the appropriate
position in direction b, and finally rotate the central column lock along
direction c.
CT28X USE MANUAL
Ball Head details:
Inverted installation of central column:
Extension of leg:
Back folding of tripod:
Monopod function:
Rotate the hook knob in the direction a shown, pull out the hook in direction
b, and unlock the central column according to direction c. Pull out the central
column along the direction d, insert the central column according to direction
e, lock the central column according to direction f, finally install the hook back
and finish the inversion.
In the direction of the diagram a, at the same time or separately, rotate
the leg locking mechanism, then pull the leg out to your desired length,
and then, in the direction of the diagram c, rotate the leg locking
mechanism and lock it.
A leg in the tripod can be removed and connected to the central column
for using as a monopod.
After all the legs are retracted and locked, as shown in the diagram a,
press the angle adjustment button. At the same time, move the leg to the
reverse side to realize the back folding according to the direction b of the
illustration. Make the tripod to the smallest size, easy to carry.
support@geekoto.com
Central column adjustment:
Platform Locking Knob
Mounting Platform
36mm Ball Joint
Body Outer
360 Panning Scale°
Head Locking Knob
Head Locking Knob
Separate Panning Lock
1 4 fast mounting/ "
Plate screws
Switching platform
Central shaft
locking knob
Foot joint
Sponge casing
Tighten the wrench
of the foot tube
Cloud head
Angle adjusting
button
Foot tube
Axis
Couple
Product specificaties
| Merk: | Geekoto |
| Categorie: | Statief |
| Model: | CT28X |
Heb je hulp nodig?
Als je hulp nodig hebt met Geekoto CT28X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief Geekoto
2 April 2025
Handleiding Statief
- Studio Assets
- Konig & Meyer
- Stalco
- Adam Hall
- Ruggard
- Sevenoak
- Robus
- Block & Block
- Olloclip
- MotoCrane
- Camgear
- Krux
- Vonyx
- Tiltall
- Gitzo
Nieuwste handleidingen voor Statief
15 Juni 2025
15 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
6 Juni 2025
24 Mei 2025