Geba Tronic ROLLOTIMER Standard Handleiding
Geba Tronic
Garagepoortopener
ROLLOTIMER Standard
Lees hieronder de 📖 handleiding in het Nederlandse voor Geba Tronic ROLLOTIMER Standard (2 pagina's) in de categorie Garagepoortopener. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Safety advice
Assembly, connection and maintenance of the device may only be executed by personnel trained
accordingly. Use for the installation of the Rollotimer a deep switch box. Please pay attention that no
cables are affecting the proper latching of the device. To prevent overvoltage and therewith a
malfunction, plug or unplug the operation panel only in de-energized state! For this purpose
disconnect the power supply of the electric circuit by switching off the corresponding fuse.
Technical Data Ref. No. 941.DCZ2.00
Power supply 230V / 50Hz
Switching voltage 250 V AC
Switching contact load 3 A (cos phi=1)
Ambient temperature +5°C to +45°C
Running time 2,5 minutes (max.)
Changeover delay min. 0,5 seconds
Accuracy < 5 seconds /day
Power reserve approx. 0,5 minutes
Protection class IP 20
Safety class II
Conformity CE
Installation and
operation manual
ROLLOTIMER Standard
Ref. No. 941.DCZ2.00
M
PE green/yellow
N blue
L black/brown
blue
brown or black
blue
brown or black
brown or black
Connection diagram
N L N ZU AUF
N NL down up
X0469
Programming of ROLLOTIMER Standard
1. Enter programming mode Press â–² (UP) and â–¼ (DOWN) simultaneously
for approx. 3 seconds.
2. Time of day
programming
Setting of the hour
18 : 32
Use â–² (UP) to set the hour.
Press â–¼ (DOWN).
Setting of the minutes
3218 :
Use â–² (UP) to set the minutes.
Press â–¼ (DOWN).
3. Automatic
opening
programming
Setting of the hour
07 : 20
Use â–² (UP) to set the hour.
Press â–¼ (DOWN).
Setting of the minutes
2007 :
Use â–² (UP) to set the minutes.
Press â–¼ (DOWN).
4. Automatic
closing
programming
Setting of the hour
21 : 45
Use â–² (UP) to set the hour.
Press â–¼ (DOWN).
Setting of the minutes
4521 :
Use â–² (UP) to set the minutes.
Press â–¼ (DOWN).
5. Operation Mode
setting
Use â–² (UP) to set one of the following modes:
man = manual operation
auto = set automatic opening and closing time
var = a random generator changes the set
automatic opening and closing time by +/- 15
minutes
6. Exit
programming
mode
Press â–¼ (DOWN).
Note: setting of the values
The value which you want to set is selected by the DOWN button and is signaled by the flashing of
the value.The value itself is set with the UP button which is raised with every push.
The values are raised automatically by pressing permanently the button. If you have reached the
desired value, confirm it by pressing DOWN which will switch automatically to the next value for
programming.
The programming mode will be closed automatically, if there is no input for 30 seconds. All set values
until then are set and safed. Due to the premature closing of the programming mode, the operation
mode will be set to manual (man).
Operation of the Rollotimer
push â–¼ (DOWN) < 1 second Jog mode or STOP, if motor is running already
push â–¼ (DOWN) > 1 second DOWN command
push â–¼ (DOWN) > 6 seconds DOWN command +
time saved for DOWN command
push â–² (UP) < 1 second Jog mode or STOP, if motor is running already
push â–² (UP) > 1 second UP command
push â–² (UP) > 6 seconds UP command +
time saved for UP command
pushâ–¼ (DOWN) + â–² (UP) < 1 second
simultaneously
Change of operation mode
push â–¼ (DOWN) + â–² (UP) > 1 second and < 3
seconds simultaneously
Activation of programming mode
push â–¼ (DOWN) + â–² (UP) > 6 seconds
simultaneously
General reset
(restore factory settings)
Jog mode
To adjust the angle of the venetian blinds push the UP or DOWN button (up to 1 second). The
automatic mode (auto) remains unchanged.
Quick programming
If the UP or DOWN button is pressed longer than 6 seconds, the blind is running in the direction and
the current time will be saved as the automatic UP or DOWN command time (memory function).
Operation modes
Manual mode man
Automatic mode (day programm) auto
Vacation mode: automatic + random generator var
You can enable the by pushing the UP and DOWN buttons simultaneously. Bymanual mode (man)
repeating this, it will be switched back to the original mode (auto or var)
The activation of the will open and close the blinds according to theautomatic mode (auto)
programmed times.
The activation of the will open and close the blinds according to thevacation mode (var)
programmed times with a randomly generated shift of +/- 15 minutes.
The blinds can be open and closed manually in any operation mode by pushing â–² (UP)
or â–¼ (DOWN).
Factory settings
Day programm UP 07:00h, DOWN 21:00h
Time 00:00h
Mode Man
Product specificaties
| Merk: | Geba Tronic |
| Categorie: | Garagepoortopener |
| Model: | ROLLOTIMER Standard |
Heb je hulp nodig?
Als je hulp nodig hebt met Geba Tronic ROLLOTIMER Standard stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Garagepoortopener Geba Tronic
30 Augustus 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
18 Juni 2023
Handleiding Garagepoortopener
- Garagepoortopener Abon
- Garagepoortopener Aperto
- Garagepoortopener Berner
- Garagepoortopener Budgetgaragedeuren
- Garagepoortopener Dickert
- Garagepoortopener DITEC
- Garagepoortopener Doco
- Garagepoortopener Doorsystems
- Garagepoortopener Einhell
- Garagepoortopener Entrematic
- Garagepoortopener FAAC
- Garagepoortopener Goris
- Garagepoortopener Homentry
- Garagepoortopener Hormann
- Garagepoortopener Liftmaster
- Garagepoortopener MAC
- Garagepoortopener Marantec
- Garagepoortopener Novoferm
- Garagepoortopener Novotecnica
- Garagepoortopener Profitech
- Garagepoortopener Rademacher
- Garagepoortopener Seculux
- Garagepoortopener Silver
- Garagepoortopener Skylink
- Garagepoortopener Somfy
- Garagepoortopener Sommer
- Garagepoortopener Superrollo
- Garagepoortopener Tormatic
- Garagepoortopener Craftsman
- Garagepoortopener Chamberlain
- Garagepoortopener Maveo
Nieuwste handleidingen voor Garagepoortopener
1 December 2023
2 Oktober 2023
2 Oktober 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023