GE ZBD4800XBB Handleiding

GE Wasmachine ZBD4800XBB

Lees hieronder de đź“– handleiding in het Nederlandse voor GE ZBD4800XBB (24 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
GE Monogram®
Installation
Instructions
Built-In Dishwashers
Models
ZBD4600XWW
ZBD4600XBB
ZBD4700XWW
ZBD4700XBB
ZBD4800XWW
ZBD4800XBB
2
Before you begin—Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the Con-
sumer.
NOTE TO CONSUMER: Keep these instructions with your Use and Care
Book for future reference.
This appliance must be properly grounded. See “Electrical Supply”, page 6.
If the dishwasher is a new installation most of work must be done before the
dishwasher is moved into place. If the dishwasher is replacing another
dishwasher the connections for the dishwasher being replaced must be
checked for compatibility with this dishwasher and replaced as necessary.
If you have a question concerning the installa-
tion of this product, call the GE Answer
Center® Consumer Information Service at
800.626.2000, 24 hours a day, 7 days a week.
If you received a damaged
dishwasher, you should
immediately contact your
dealer or builder.
WARNING
Contents Design Information
Installation Notes .......................................................... 3
Standard Installation in 24" or 25" Deep Cabinets .... 3
Double Dishwashers ...................................................... 4
Divider Panel Installation............................................. 4
Double Dishwashers Water Supply .............................. 4
Double Dishwashers Drain Hose, Air Gaps ................ 4
Preparation
Choosing the location .................................................. 5
Dimensions & Specifications ....................................... 5
Electrical Supply ........................................................... 6
Hot Water Supply .......................................................... 7
Prepare Drain Plumbing .............................................. 8
Step 1: Check Installation Hardware .......................... 9
Tools Required ............................................... 10
Materials Required ........................................ 10
Step 2: Remove Packaging ......................................... 10
Models ZBD4600X and ZBD4700X ONLY
Step 3: Prepare 1/4" Custom Panels ......................... 11
Install Custom Access Panel .......................... 11
Insert Custom Door Panel ............................. 11
Consumer must supply custom panels.
Before you begin: Make sure that custom
panels are available. Custom panels must be
installed onto the dishwasher before final
installation. If they are not, the dishwasher
will have to be removed from under the
counter to install these panels.
Models ZBD4600X and ZBD4700X have a
finished front door and access panel. 1/4"
thick custom panels may be installed onto
these models.
Models ZBD4800X does not have a finished
door or access panel. A custom 3/4" thick
door and access panel must be supplied by
the consumer.
Installation instructions for both 1/4" and
3/4" thick custom panels are included in
this booklet.
Models ZBD4800X ONLY
Step 3A: 3/4" Door and Access Panels...................... 12
Remove Access Panel Assembly .................. 12
Install Custom Access Panel to Assembly .. 13
Remove Plastic Chassis Cover ..................... 13
Secure Custom Panel to Dishwasher ... 14, 15
Installation – All Models
Step 4: Adjust The Door Balance ............................ 16
Step 5: Install Leveling Legs .................................... 16
Step 6: Install Water Inlet Fittings ........................... 17
Step 7: Protect the Countertop ............................... 17
Step 8: Connect Electrical (For Power Cord
Installation Only) ......................................... 17
Step 9: Level the Dishwasher ................................... 18
Step 10: Install Side Filler Strips ................................ 18
Step 11: Connect Drain Hose .................................... 18
Step 12: Slide Dishwasher Into Opening .................. 18
Step 13: Connect Water Line ..................................... 19
Step 14: Install Drain Line ......................................... 19
Step 15: Connect Electrical (For direct Connection
to House Wiring) ......................................... 20
Step 16: Secure Dishwasher to Countertop .............. 20
Step 17: Reinstall Chassis Cover ................................ 20
Step 18: Install Toekick and Access Panel ................ 21
Install Optional Custom Toekick ................ 21
Finalize Installation ..................................... 21
Questions & Answers .................................................. 23
Design Information
Stainless Steel Interior Dishwashers
3
Models ZBD4600X and ZBD4700X
dishwashers are supplied as either a black or
white model. Door and access panels may be
replaced with custom decorative panels of
wood or other materials to match surround-
ing cabinetry.
• Standard door and access panel trim will
accommodate custom panels up to 1/4"
thick.
Installation
Notes
Model ZBD4800X dishwashers are supplied as
either a black or white model. These models
do not have a finished door or access panel. A
custom 3/4" thick door and access panel must
be custom made to suit the installation.
• All dishwasher models may be installed
beneath any type of countertop.
• A matching toekick is supplied with all
models and may be customized to match
surrounding cabinetry.
• Side trim is not required. All models come
equipped with vinyl strips to fill a 24" wide
opening.
Models ZBD4600X and ZBD4700X as supplied:
• The dishwasher door will be flush with the
front face of the cabinetry.
• The dishwasher control panel will extend
1/4" beyond the front face of cabinetry.
The addition of a 1/4" thick custom door and
access panel will make the door and control
panel nearly flush.
Models ZBD4800X:
• With the 3/4" thick custom panel in place,
the exterior is trimless and fits flush with
adjacent cabinetry.
Standard
Installation
in 24" or 25"
deep cabinets
Cabinet
Depth
24" Cabinet Resting
Against Wall


Product specificaties

Merk: GE
Categorie: Wasmachine
Model: ZBD4800XBB

Heb je hulp nodig?

Als je hulp nodig hebt met GE ZBD4800XBB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine GE

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine