GE Profile JDP40CBCC Handleiding

Bekijk gratis de handleiding van GE Profile JDP40CBCC (1 pagina’s), behorend tot de categorie Fornuis. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over GE Profile JDP40CBCC of wil je andere gebruikers van dit product iets vragen? Stel een vraag

3. Drill two 1/8” pilot holes into the cabinet where

you just marked. (Caution should be used to

avoid drilling through the opposite side of

the cabinet.)

4. Attach the “L” brace to the cabinet with the

screws provided.

5.Repeat the procedure on the opposite side.

Installation Instructions for

Optional

Range

Retention “L” Brace

When installing this range onto some smooth countertops, it may be necessary to

install the Range Retention “L” Braces provided, to prevent movement of the range.

Before you begin—Read all of the safety information in your Owner’s Manual.

Note to Installer—Be sure to leave these instructions with the Consumer.

Note to Consumer—Keep these instructions with your Owner’s Manual for future reference.

Tools Needed

•Phillips Head Screwdriver

•Drill

Parts Included

•4 Phillips Head Wood Screws

•2 “L” Braces

Part No. 164D3333P218

Pub No. 49-8997

318200027 Rev. A

Range Leg

1. Once the range is securely in position in the

cabinet opening, position the “L” brace against

the side of the cabinet and flush with the front

of the range leg.

2.Hold the “L” brace in place and mark the two

holes on the inside of the cabinet.

“L” Brace

12-99 JR

This optional installation should follow step 8 in the Installation

Instructions of Owner’s Manual JDP40 164D3333P207 49-8980.

Printed in Canada

Product specificaties