GE 100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GE 100 (35 pagina's) in de categorie Bloedglucosemeter. Deze handleiding was nuttig voor 141 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/35
A Healthcare professional should be contacted when Customer Service is not available.
Please forward your warranty card to GE Diabetes Customer Support Center.
GE Diabetes Customer Support Center
10865 Rancho Bernardo Road
Ste 100
San Diego, CA 92127, USA
Thank you for selecting the GE100 Blood Glucose Monitoring System. This manual provides all the
information you need to operate this product for accurate test results. Please read the entire manual
before you start any testing.
For people living with diabetes, it is important to regularly monitor blood glucose levels to effectively
reduce complications from the disease. The easy-to-use GE100 Blood Glucose Monitoring System
provides accurate, reliable results to help you better manage your diabetes.
The GE100 Blood Glucose Monitoring System is perfect for both self-testing and professional use.
Designed for in vitro diagnostic use only, testing requires just a small amount of fresh capillary whole
blood from either the fingertip, palm or forearm. If you have any questions regarding the GE100 Blood
Glucose Monitoring System or testing procedures, contact our Customer Support staff or your
healthcare professional.
The GE100 Blood Glucose Monitoring System is manufactured and supported by Bionime Corporation
and its authorized representative. If you have any questions or concerns, please contact GE Diabetes
Customer Support Center toll free at 1-866-613-7085 or visit our website at www.gediabetes.com We .
will make every effort to provide assistance and solutions for you.
Preface
32
Preface
Copyright 2011 Bionime Corporation. All Rights Reserved Worldwide©
- Before using the Blood Glucose Monitoring System to test your blood glucose, please read all the
instructions and conduct all the tests including the quality control test (Refer to page 36.)
- Please do the quality control test regularly to make sure the test results are accurate.
- The Blood Glucose Meter can only be used with the Blood Glucose Test Strips. Other
brand strips should not be used under any circumstances. The use of other brands of strips may give
inaccurate results.
- The Blood Glucose Monitoring System is intended for in vitro diagnostic use only. The testing
result is calibrated to be plasma equivalent to testing with fresh capillary whole blood samples from the
fingertip, palm and forearm.
- The Blood Glucose Monitoring System is intended for self-testing and professional use. It should
not be used to diagnose diabetes mellitus.
- Blood Glucose Monitoring System has not been validated for use on neonates. Therefore, it's not
intended for use on neonates.
- Blood Glucose Monitoring System has not been used for arterial blood testing yet, so it is not
suitable to be used for arterial blood testing.
-
- Follow all environmental protection regulations when disposing of batteries.
GE100
GE100 GE100
GE100
GE100
GE100
GE100
- Do not perform a blood glucose test when USB cable is connected to the Blood Glucose Meter.
If the GE100 Blood Glucose Meter and Test Strips are exposed to a substantial change in temperature,
please wait 30 minutes before measurement.
Caution
54
Precaution
A minimum of 1.0µL of blood is needed for testing with the Blood Glucose Monitoring System.
Blood sample size above 3.0µL might contaminate the test strip port and the meter.
Blood sample size below 1.0µL might cause inaccurate test result or might not start the meter. In this
case, repeat the test with a new test strip.
GE100
CAUTION
- The Blood Glucose Meter will be set to mg/dL by default when sold in the United States.
When your display shows " mmol/L " during setting or test, please contact customer service.
Use of the wrong unit of measure may cause incorrect treatment.
GE100
Sample Size Example
- Avoid contact with dripping or splashing liquids.
- The minimum blood sample size to test using the Blood Glucose Monitoring System is 1.0µL. GE100
1.0µL 1.5µL 2.0µL 3.0µL 4.0µL


Product specificaties

Merk: GE
Categorie: Bloedglucosemeter
Model: 100

Heb je hulp nodig?

Als je hulp nodig hebt met GE 100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden