Garrett ACE 300i Handleiding

Garrett Detector ACE 300i

Lees hieronder de 📖 handleiding in het Nederlandse voor Garrett ACE 300i (14 pagina's) in de categorie Detector. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

1881 W. State Street

Garland, Texas 75042

USA

Tel: 1.972.494.6151

Email: sales@garrett.com

Fax: 1.972.494.1881

ACE 300i Owner’s Manual

Owner’s Manual

English / Spanish / French / German

ACE 300i™ 1

TABLE OF CONTENTS

ACE 300 iControl Panel 2 ��

Quick Start Guide 3 ��

ACE 300 iContents 4 ��

Detector Assembly 5 ��

Power On/Basic Controls 6 ��

Frequency Adjust 6 ��

Target Information 7 ��

Audio Features 8 ��

Selecting Modes 9(Discrimination Patterns) ��

Sensitivity ��10

Notch Discrimination ��11

Iron Masking ��13

Pinpointing ��14

Bench Tests ��16

Hunting Tips With Your ��ACE 300i17

Troubleshooting Guide ��19

Battery Replacement 20 ��

Metal Detecting Code Of Ethics ��21

Cautions 22 ��

Caring For Your ACE 300i Detector 22 ��

ACE 300i Warranty & Service 23 ��

ACE 300i Accessories ��24

2Garrett Metal Detectors ACE 300i™ 3

QUICK START GUIDE

1. Power ON.

Press and release the ON / OFF Power button� The ACE 300i

powers on in the last mode used, automatically adjusts for

ground minerals and is ready to search� The detector

operates with four (4) AA batteries which are already

installed by Garrett� (Factory default mode is Coins�)

2. Select Mode.

Use the Mode button to select a different detection mode,

when desired�

3. Adjust settings.

Adjust Sensitivity or Discrimination settings, if desired�

4. Begin scanning.

Lower the searchcoil to approximately 2 to 3cm above the

ground and scan the coil left and right at approximately

1m/second� The coil must be in motion for target

detection, but can remain stationary during Pinpoint�

ACE 300 iCONTROL PANEL

Sensitivity

Setting

DISCRIM and Accept/Reject

Buttons

Use DISCRIM (+) or (-) to select a

cursor. Then use (/X) button to set

its discrimination on or off.

Frequency Adjust

While holding down (/X) button,

use DISCRIM (+) or (-) to increase

or decrease frequency setting.

SENSITIVITY

Button

increases or

decreases sensitivity�

MODE

Button

selects detection mode (i.e.

discrimination pattern)�

Power ON / OFF:

hold 1 second to turn

power on/off.

Depth

Indicator

indicates depth

of coin-sized

target�

Mode

Indicator

Target ID Legend

indicates metal types.

Lower Scale

indicates notch

discrimination

pattern.

Target ID Cursor

indicates probable target identity.

PINPOINT

Button

Press and hold to

precisely locate a target.

Digital

Target ID

Battery

Level

Indicator

Product specificaties

Merk:	Garrett
Categorie:	Detector
Model:	ACE 300i
Soort bediening:	Knoppen
Ingebouwd display:	Ja
Diepte:	1290 mm
Frequentieband:	8 kHz
Ondersteund aantal accu's/batterijen:	4
Batterij bijna leeg-indicatie:	Ja
Geschikt voor materialen:	Gold, Metal, Silver
Batterijtechnologie:	Alkaline
Type beeldscherm:	LCD
Type batterij:	AA
Diameter zoekspoel:	- mm
Zoekdiepte (max):	0.25 m