GARDE 181WEDGE6 Handleiding
GARDE
Snijmachine
181WEDGE6
Lees hieronder de 📖 handleiding in het Nederlandse voor GARDE 181WEDGE6 (4 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 3.7 sterren beoordeeld
Pagina 1/4
4 Section
Item #181WEDGE4
6 Section
Item #181WEDGE6
8 Section
Item #181WEDGE8
8 Section
Apple Corer
Item #181CORE8
10 Section
Item #181WEDGE10
12/2021
Fruit & Vegetable Wedgers
Safety Instrucons
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades.
Preparaon
1) This unit comes fully assembled.
2) Place the unit on a sturdy work surface.
Operaon
1) Liî™› the push block and place the produce on the blade assembly.
2) Remove hands and ngers from the cung area and bring the push block down to force the produce
through the blades.
3) Clean the machine aer wedging is completed using the instrucons below.
Cleaning and Maintenance
1) Liî™› the pusher block from the guide rods.
2) Remove the screws from the boîš‚om of the frame to release the blade assembly.
3) Wash the push block, blade assembly, and frame thoroughly.
4) To re-assemble, reverse the procedure.
5) When needed, lubricate the guide rods with mineral oil, food grade grease, or paran.
Do not use cooking oil.
Please read and comply with the instrucons listed on this document. To get the best service life
and performance from your machine, clean it thoroughly before and aî™›er each use by following the
instrucons listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
4 Secon Blade Assembly
#181WBA4
10 Secon Blade Assembly
#181WBA10
Knob
#181VWKNOB
Feet
#181FT1
4/8 Secon Push Block
#181WPB48
10 Secon Push Block
#181WPB10
6 Secon Push Block
#181WPB6
8 Secon Blade Assembly
#181WBA8
8 Secon Corer Blade Assembly
#181CBA8
6 Secon Blade Assembly
#181WBA6
White Bushing
#181BUSHING3
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181WEDGE6 |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181WEDGE6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
Handleiding Snijmachine
- Snijmachine Magic Chef
- Snijmachine Wilfa
- Snijmachine Bosch
- Snijmachine Russell Hobbs
- Snijmachine JAC
- Snijmachine MPM
- Snijmachine Vox
- Snijmachine Kenwood
- Snijmachine RIDGID
- Snijmachine Korona
- Snijmachine Sencor
- Snijmachine Jata
- Snijmachine Mia
- Snijmachine Kalorik
- Snijmachine Boska
Nieuwste handleidingen voor Snijmachine
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025