GARDE 181CHEESBLK Handleiding
GARDE
Snijmachine
181CHEESBLK
Lees hieronder de 📖 handleiding in het Nederlandse voor GARDE 181CHEESBLK (3 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 5 personen en werd door 3 gebruikers gemiddeld met 4.3 sterren beoordeeld
Pagina 1/3
USER MANUAL
Item #181CHEESBLK
11/2022
Cheese Blocker
Operaon
1) Place the unit on a sturdy work surface.
2) Be sure the tube cap makes contact with the work surface when the cung bow is in the down posion
to avoid wire breakage.
3) Li cung bow to the up posion and place cheese on the cung surface. Make sure poron of cheese
that is intended to be cut is over the slot.
4) Gently but rmly lower the cung bow to produce the cut.
Cleaning and Maintenance
1) The cheese blocker is dishwasher safe and can be cleaned in a convenonal sink.
2) The cheese blocker can be completely disassembled with basic small hand tools for a thorough cleaning.
3) The cheese blocker can only be used to cut soî™› cheeses.
Replace Cuî¾®ng Wire
1) Remove the thread caps and loosen the wing nuts on the L screw and the eye bolt.
2) Remove old cung wire if it is sll present.
3) Hook one end loop of new cuî¾®ng wire on the eyebolt and the other loop on the L-screw.
4) Tighten the wing nut on the L screw unl it is secure against the cung bow.
5) Tighten the wing nut on the eye bolt unl it is secure against the cung bow.
6) Replace the thread caps.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
Replacement Parts
Cuî¾®ng Wires 3pk
#181CHSWIRE3
Thread Cap
#181THREDCAP
Tube Cap
#181CHSCAP
Eye Bolt
#181EYEBOLT
Foot Cap
#181CHSFOOT
Wing Nut
#181SSWNUTCB
USER MANUAL
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181CHEESBLK |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181CHEESBLK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
Handleiding Snijmachine
- Snijmachine Clatronic
- Snijmachine Saturn
- Snijmachine Bomann
- Snijmachine Maruyama
- Snijmachine Hyundai
- Snijmachine G3 Ferrari
- Snijmachine Russell Hobbs
- Snijmachine RIDGID
- Snijmachine Team
- Snijmachine Ade
- Snijmachine Weston
- Snijmachine Princess
- Snijmachine FAC
- Snijmachine Efbe-schott
- Snijmachine Gastronoma
Nieuwste handleidingen voor Snijmachine
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025