Galaxy CJ180 Handleiding


Bekijk gratis de handleiding van Galaxy CJ180 (3 pagina’s), behorend tot de categorie Sapcentrifuge. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over Galaxy CJ180 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/3
User Manual
Citrus Juicer
Users Manual
177CJ180
Please read the manual thoroughly prior to equipment setup,
operation, and maintenance.
05/2023
30359123035912
CONFORMS TO UL STD. 763
- 1 -
- 2 -
User Manual
Safety
Juicer should only be operated by trained individuals.
Be sure to read the operation and safety manual before using.
CAUTION: DO NOT SUBMERGE MOTOR IN WATER
CAUTION: AVOID CONTACT WITH MOVING PARTS
CAUTION: DO NOT OPERATE WITH DAMAGED CORD OR PLUG
To avoid damage to the cord, do not allow it to hang over the edge of the counter or
touch a hot surface.
Assembly
Be sure unit is unplugged before assembly and disassembly.
1. Position bowl so it is flat on the motor housing.
2. Adjust spout position.
3. Place desired size reamer and strainer inside the bowl and rotate until the motor drive
coupling is in position.
Operation
1. After unit is properly assembled (see assembly instructions), plug into 120V outlet.
2. Switch unit to “ON” (allow motor to reach full speed before proceeding).
3. Place halved fruit on reamer and apply firm downward pressure.
4. DO NOT press so hard that the reamer stops spinning. This can wear down the motor over time
and is not necessary to juice the citrus fruit being used.
CAUTION: AVOID CONTACT WITH MOVING PARTS
- 3 -
User Manual
Cleaning
Be sure unit is unplugged before assembly and disassembly.
1. Remove reamer/strainer from bowl and bowl from motor housing.
2. Wipe motor housing and all external surfaces with soft damp cloth.
CAUTION: DO NOT SUBMERGE MOTOR IN WATER
3. Wash reamer/strainer and bowl with mild soap (such as Noble Chemical’s 147SUNBRIGHT) and
warm water.
4. Allow parts to dry and reassemble (see assembly instructions).
Troubleshooting
This juicer is protected by a built-in thermal switch. In the event of
overheating, the motor will stop. To reset, follow these steps:
1. Set on/off switch to “off. Remove the plug from the socket.
2. Wait until the motor cools (about 30-40 minutes). Reconnect the plug and press on/off switch.


Product specificaties

Merk: Galaxy
Categorie: Sapcentrifuge
Model: CJ180

Heb je hulp nodig?

Als je hulp nodig hebt met Galaxy CJ180 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Sapcentrifuge Galaxy

Galaxy

Galaxy CJ180 Handleiding

25 Augustus 2025

Handleiding Sapcentrifuge

Nieuwste handleidingen voor Sapcentrifuge