Furman M-8x AR Handleiding

Furman Niet gecategoriseerd M-8x AR

Lees hieronder de 📖 handleiding in het Nederlandse voor Furman M-8x AR (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 76 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

10001883-A

M-8x AR

Instructions

GRE EN - OK

YEL- LIMIT ED

RED - NOT OK

100 105 110 115 120 125 130 135

LOW

EVS

WITHIN

REG

PROTECTION

HIGH

EVS

EXTREME

CURRENT

INCOMING VOLTAGE

120 VAC LINE VOLTAGE REGULATOR

REGULATED OUTLET

15 AMPS

PUSH TO RESET

M-8x AR

OFF

15A 120V 50-60 Hz

MAIN POWER

100 105 110 115 120 125 130 135

LOW

EVS

WITHIN

REG

PROTECTION

HIGH

EVS

EXTREME

CURRENTINCOMING VOLTAGE

120 VAC LINE VOLTAGE REGULATOR REGULATED OUTLET

15 AMPS

PUSH TO RESET

M-8x AR

OFF

15A 120V 50-60 Hz MAIN POWER

120 VAC

50/60 Hz

15A MAX

120 VAC

50 - 60 Hz

MAX LOAD

15 AMPS

MADE IN CHINA

C US

GREEN - OK

YEL - LIMITED

RED - NOT OK

Core Bra nds / Furman / 152908

VOLTAGE REGULATED OUTLETS

AC Line Voltage Regulator

M-8x AR

For more information:

Para más información

Pour plus de renseignements:

877-486-4738 / www.furmansound.com

1. Please read and observe all of the safety and operating instructions before the M-8x AR is operated or connected to mains power.

2. Retain these instructions for future reference.

3. The M-8x AR should not be used near water for example, near a bathtub, kitchen sink, in a wet basement, near a swimming pool, etc.

4. Do not place the M-8x AR near sources of heat; such as radiators, heat registers, stoves, or other appliances that produce heat.

5. Route the power cord and other cables such that they are not likely to be walked on, tripped over, or stressed. Pay particular attention to the condition of

cords and cables at plugs, and the point where they exit from the M-8x AR. To prevent risk of ﬁre or injury, damaged cords and cables should be replaced

immediately.

6. Clean the M-8x AR using a damp cloth only. Do not use solvents or abrasive cleaners. Never pour or spray any liquid on or into the M-8x AR.

7. When left unused for an extended period of time, the power cord of the M-8x AR should be unplugged from the outlet.

8. The M-8x AR should be serviced by qualiﬁed service personnel when:

a. The power supply cord or the plug has been frayed, kinked, cut, or damaged.

b. Objects have fallen into or liquid has spilled into the unit.

c. The M-8x AR does not appear to operate normally or exhibits a marked change in performance.

d. The M-8x AR has been dropped, or the enclosure damaged.

9. The M-8x AR requires that a safety ground be present for proper operation. Any attempt to operate the M-8x AR without a safety ground is considered

improper operation and could invalidate the warranty.

• Provides nine regulated, conditioned AC outlets-eight on the rear panel and one on the front

• Input capacity is 15 A; output capacity is 12 to 15 A

• Extreme over-voltage (instant) shutdown and under-voltage (delayed) shutdown, safeguard connected equipment

• Extreme Voltage Shutdown (EVS) indicator LED

• Extreme over-current shutdown protects regulator and connected equipment.

• Extreme Current Shutdown (ECS) indicator LED

• Tri-color “In-Regulation” indicator

• Protection OK indicator

• Eight element, Bi-color bar graph meter to indicate input line voltage

• User accessible thermal circuit breaker protects against overload

• Low noise toroidal autotransformer with very low stray magnetic ﬁeld leakage

• Front Panel ON/OFF switch

• Compact, lightweight unit weighs only 15 lbs. (6.8 kg)

To obtain best results from your Furman M-8x AR please be sure to read this manual carefully.

WARNING: To reduce the risk of electrical shock, do not expose your M-8x AR to rain or moisture.

Hazardous voltages are present inside the enclosure. Please do not remove the cover for any reason. There are no user serviceable parts inside.

Refer servicing to qualiﬁed service personnel.

FEATURES

IMPORTANT SAFETY INSTRUCTIONS PLEASE READ PRIOR TO INSTALLATION

INTRODUCTION

Thank you for purchasing a Furman M-8x AR AC Line Voltage Regulator and congratulations on your choice. The M-8x AR has been designed with the unique

requirements of the entertainment industry in mind. Any application that requires clean, ﬁltered, protected and regulated AC power for optimum performance

would beneﬁt from the use of an M-8x AR.

GR EEN - OK

YEL- LI MITED

RE D - NO T OK

100 105 110 115 120 125 130 135

LOW

EVS

WITHIN

REG

PROTECTI ON

HIGH

EVS

EXTREM E

CURRENT

INCOMING VOLTAGE

120 VAC LINE VOLTAGE REGULATOR

REGULATED OUTLET

15 AMPS

PUSH TO RESET

M-8x AR

OFF

15A 120V 50-60 Hz

MAIN POWER

www.furmansound.com • 877-486-4738 2

Please read IMPORTANT SAFETY INSTRUCTIONS

• No serviceable parts.

• Please inspect the unit thoroughly.

• Please contact Furman Customer Service at 800-472-5555, if there is any noticeable damage to product or product does not operate correctly.

Contents of this package include:

• M-8x AR

• Instruction Manual

BEFORE YOU BEGIN, INSPECT UPON RECEIPT

The Furman M-8x AR Voltage Regulator is intended to protect sensitive electronic equipment from problems caused by AC line voltage irregularities such

as brownouts, sags, and over-voltage conditions. Such irregularities can cause audio tonal changes, digital equipment malfunctions (such as loss of MIDI

programs or other data), or in extreme cases, permanent damage. The M-8x AR can accept input voltages over a wide range (see tables below) and convert

this to a steady, stable 120VAC +/- 5V output.

AC LINE VOLTAGE REGULATOR

The M-8x AR has eight receptacles on the rear panel, and one on the front panel, all are functionally in-

terchangeable. The receptacles are regulated, spike-suppressed, and ﬁltered against RFI with a 3-pole

ﬁlter, making the M-8X AR a full-function power conditioner. The M-8x AR has no external controls

other than an on-off switch.

Note: The M-8x AR is designed for use with AC voltage only and DC voltages should never be applied.

Also, the M-8x AR does not change or regulate the line frequency in any way. The output frequency will

always be the same as the incoming line frequency.

Maximum and Minimum Load:

The M-8x AR can handle loads totaling up to 15 amperes as long as the input voltage is greater than or

equal to 124 Volts. For voltages below 124 Volts, the nominal 15 Amp current handling capacity must

be de-rated at approximately 113 milliamps per volt below 124 VAC.

To successfully handle worst-case brownout conditions, you should plan your total load so that it does

not exceed 12 amps, or 1400 watts under brownout conditions. Please note that the total load refers

to the combined current demand of all devices plugged into the M-8x AR, not just each individual

receptacle, or load.

75 80 90 100 110 120 130 140 145 160

140

130

120

110

100

Product specificaties

Merk:	Furman
Categorie:	Niet gecategoriseerd
Model:	M-8x AR
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	7144 g
Breedte:	482.6 mm
Diepte:	279.4 mm
Hoogte:	44.45 mm
Frequentie:	50/60 Hz
Rack-montage:	Ja
Spanning:	120 V
Rackcapaciteit:	1U
Aantal AC uitgangen:	9 AC-uitgang(en)
Nominale input voltage:	97-141 V
Spanningsbeveiliging:	Ja