Funai LED22T800 Handleiding

Funai Televisie LED22T800

Lees hieronder de đź“– handleiding in het Nederlandse voor Funai LED22T800 (20 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
EN
2
PRECAUTIONS
CAUTION
1. Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
2. Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered. Avoid installation in
enclosed spaces such as bookcases unless proper
ventilation is provided.
3. Keep the unit away from radiators and other heat sources.
4. Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit par ts resulting in a fire or electric
shock.
5. To prevent fire or shock hazard, do not expose this unit to
dripping or splashing, no objects filled with liquids, such as
vases, should be placed on the unit.
6. Use the unit on a horizontal (flat) surface only.
7. Do not place any combustible objects on the unit
(candles, etc.).
8. The LCD panel used in this unit is made of glass. Therefore,
it can break when the unit is dropped or applied with
impact. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks. The LCD panel is a very high
technology product with 921,600 thin film transistors,
giving you fine picture details. Occasionally, a few non-active
pixels may appear on the TV screen as a fixed point of
blue, green or red. Please note that this does not affect the
performance of your unit.
9. Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10. The mains plug shall remain readily operable.
11. Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12. Keep a distance of 20 cm around the ventilation openings
of the unit.
13. Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
POWER SUPPLY
The main power supply is engaged when the main plug is plugged in a 220-240 V~, 50 Hz AC outlet. To operate the unit,
press Q(power) to turn on the unit.
WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS.
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
Model number:_________________ Serial number:_________________
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the apparatus’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
Do not place the unit on the furniture that is capable of being tilted by a child or an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
WARNING: To prevent the spread of fire, keep candles
or other open flames away from this
product at all times
EN
3
INTRODUCTION
A Note about Recycling
Following information is only for EU-member
states:
Following information is only valid EU-member
States: Disposal of batteries and/or
accumulators
Battery Precautions
Contents
PRECAUTIONS............................................................... 2
INTRODUCTION.......................................................... 3
Supplied Accessories......................................................................4
Symbols Used in this Manual.....................................................4
Attaching the Base...........................................................................4
Tilting the Unit ................................................................................... 4
Fixing the Unit on Your Furniture...........................................4
Installing the Batteries .................................................................... 4
Remote Control................................................................................ 4
Your TV................................................................................................. 5
PREPARATION FOR USE ............................................ 6
Antenna Connection...................................................................... 6
External Connection.......................................................................6
Plug In the AC Power Cord ......................................................7
Initial Setup........................................................................................... 7
OPERATIONS ................................................................. 8
Watching a TV Programme....................................................... 8
Channel List......................................................................................... 8
Sleep Timer.......................................................................................... 8
Switching the Input Mode........................................................... 8
Colour System................................................................................... 8
ECO Mode ..........................................................................................8
Sound Select .......................................................................................8
TV Screen Information..................................................................9
EPG (Electronic Programme Guide).....................................9
Changing the TV Screen Display Mode .............................10
OTHER SETTINGS ....................................................... 11
Picture Adjustment.........................................................................11
Advanced Picture Adjustment.................................................11
Sound Adjustment..........................................................................12
Channel Settings ..............................................................................12
Channel Scan.....................................................................................13
Lock Settings ......................................................................................14
Audio Settings ...................................................................................14
Subtitle Settings ................................................................................15
Teletext.................................................................................................15
Common Interface (CI)...............................................................16
PC Settings..........................................................................................16
FUN-LINK............................................................................................16
Time Setup..........................................................................................17
Software Download.......................................................................18
Factory Reset .....................................................................................18
Menu Language Selection...........................................................18
TROUBLESHOOTING GUIDE.................................. 19
OTHER INFORMATIONS .......................................... 20
Specifications......................................................................................20
Trademark Information................................................................20
License...................................................................................................20
Declaration of conformity..........................................................21
Cabinet Cleaning ............................................................................. 21
Panel Cleaning...................................................................................21
Servicing................................................................................................21
License Statement.........................................end of book
This unit's packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local
recycling regulations.
This product consists of materials which can
be recycled and reused if disassembled by a
specialised company.
The use of the symbol indicates that this product may not
be treated as household waste.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise
be caused by inappropriate waste handling
of this product.
For more detailed information about
recycling of this product, please contact
your local city office, your household waste
disposal service or the shop where you
purchased the product.
Pb, Hg, Cd
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and disposed
of separately from household waste.
If the battery or accumulator contains more than the specified
values of lead (Pb), mercury (Hg), and/or cadmium (Cd)
defined in the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out wheeled
dust bin symbol.
By participating in separate collection of
batteries, you will help to assure the proper
disposal of products and batteries and thus
help to prevent potential negative conse-
quences for the environment and human
health.
For more detailed information about the
collection and recycling programmes available
in your country, please contact your local city
office or the shop where you purchased the
product.
• Be sure to follow the correct polarity as indicated in the
battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc or rechargeable batteries like
ni-cad, ni-mh, etc.) or old batteries with fresh ones.
• If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
• Do not try to recharge batteries; they can overheat and
rupture.
EN
4
Supplied Accessories
• Remote Control
• Batteries (R03/AAA, 1.5V x 2)
• Owner's Manual
• Screw kit for attaching the base
Symbols Used in this Manual
The followings are the description for the symbols used in this
manual.
If neither symbol appears, the operation is applicable to both.
Attaching the Base
You must attach the base to the unit to have it as a table top
unit. Be sure the front and rear of the base match the proper
direction.
1Spread a thick and soft cloth over a table as shown.
Place the main unit face down onto it. Make sure not to
damage the screen.
2Insert the metal neck under the bottom of the main
unit into base holes. (shown by arrow), then move the
base until it stops and the 2 mounting holes are aligned.
Make sure not to put the AC power cord between the
base and the unit.
3Drive Phillips head screws into the 2 threaded holes at
the rear of this unit until they are tight.
To remove the base from this unit
Unscrew the Phillips head screws on step 3. After the screws
are removed, move the base in the opposite direction on step
2 to pull the base from the unit. Be careful not to drop the
base when you remove it.
Tilting the Unit
Fixing the Unit on Your
Furniture
Screw this unit on your furniture tightly using wood screw
(not supplied) in the hole at the back of the base as shown.
• Recommended screw dimension : 5.1 x 20 mm
Installing the Batteries
Install the batteries (R03 / AAA, 1.5 V x 2) matching the
polarity indicated inside battery compartment of the remote
control.
Remote Control
Digital TV operation
Analogue TV operation
• When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the
unit to fall, resulting in injuries as well as damage to the unit.
• Make sure to use the table which can support the weight of this
unit and is larger than this unit.
• Make sure the table is in a stable location.
You can adjust the base to change the
angle of the unit (-2° to 10°).
DTV
ATV
-2° 10°
When you remove this unit make sure to unscrew the wood screw
from your Wood Stand, Furniture and other wood item.
screw hole
Rear of this unit
1 15
2
3
4
5
6
7
8
9
10
12
13
14
17
18
19
20
21
23
25
22
24
16
11


Product specificaties

Merk: Funai
Categorie: Televisie
Model: LED22T800

Heb je hulp nodig?

Als je hulp nodig hebt met Funai LED22T800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Televisie Funai

Handleiding Televisie

Nieuwste handleidingen voor Televisie