Frigidaire FCWD302LAF Handleiding

Frigidaire Oven FCWD302LAF

Lees hieronder de 📖 handleiding in het Nederlandse voor Frigidaire FCWD302LAF (28 pagina's) in de categorie Oven. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(with cooktop combination installations)
Figure 1
30" Single Wall Ovens
PN 807153708 Rev. A (2021/07)
English – pages 1-10
Español – páginas 11-20
Français – pages 21-30
All dimensions are in inches (cm).
NOTES:
1. Allow at least 23" (58.4 cm) clearance in front of
oven for door depth when it is open.
2. Dimension G (cutout depth) is critical to the proper
installation of the built-in oven. If the oven trim does
not butt against the cabinet, or if noise is heard on
convection models, verify dimension G to assure it
is the required depth.
Printed in U.S.A.
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY: Do not store or use gasoline or other
ammable vapors and liquids in the vicinity of this or any other appliance.
Your new wall oven has been designed to t a variety of cutout sizes to make the job of installing easier. The rst
step of your installation should be to measure your current cutout dimensions and compare them to the cutout
dimensions chart below for your model. You may nd little or no cabinet work being necessary.
PRODUCT DIMENSIONS
A B C D E
297/8 (75.9 cm) 28 (71.1 cm) 287/16 (72.2 cm) 253/16 (63.9 cm) 26 (66.1 cm)
CUTOUT DIMENSIONS AND CABINET WIDTH
F G H. Standard Height
(**Others, see note 3) I
Min. Max. Min. Min. Max.
281/2 (72.4 cm) 29 (73.7 cm) 23 1/2 (59.7 cm) 263/4 (68.0 cm) 28 (71.1 cm) 301/8 (76.5 cm) Min
United States
and Canada
Hole for Cord
Electrical Junction Box
2" (5 cm) Wide Wood Spacer if Needed
SINGLE WALL OVEN INSTALLATION
B
D
C
E
A
H F
I
G
Door Open
(see note 2)
21/8" (5.4 cm)
Min.
31" *
(78.7 cm)
2" (5.1 cm)
Min.
3. For a cutout height greater than the maximum (H),
add one 2"(5 cm) wide wood shim of appropriate
height to each side of the opening under the
appliance side rails. A trim kit may be purchased
through a dealer, service, or on the brand website.
* Suggested distance from
oor is 31" (78.7cm).
Minimum required distance
is 4 ½" (11.4cm).
2
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(with cooktop combination installations)
Figure 2
30" Double Wall Ovens
NOTES:
1. Allow at least 23" (58.4 cm) clearance in front of
oven for door depth when it is open.
2. Dimension G (cutout depth) is critical to the
proper installation of the built-in oven. If the oven
trim does not butt against the cabinet, or if noise
is heard on convection models, verify dimension
G to assure it is according to the required
dimension.
3. For a cutout height greater than the maximum
(H), add one 2"(5 cm) wide wood shim of
appropriate height to each side of the opening
under the appliance side rails. A trim kit may be
purchased through a dealer, service, or on the
brand website.
All dimensions are in inches (cm).
Hole for Cable
Electrical Junction Box
DOUBLE WALL OVEN INSTALLATION
C
E
D
A
B
F
I
G
H
Door Open
(see note 2)
21/8" (5.4 cm)
Min.
111/2"
(29.2 cm)
2" (5.1 cm)
Min.
2" (5 cm) Wide Wood
Spacer if Needed
PRODUCT DIMENSIONS
A B C D E
297
/8 (75.9 cm) 503/4 (128.9 cm) 28 7
/16 (72.2 cm) 253/16 (63.9 cm) 487/8 (124.1 cm)
CUTOUT DIMENSIONS AND CABINET WIDTH
F G H. Standard Height
(**Others, see note 3) I
Min. Max. Min. Min. Max.
281
/2 (72.4 cm) 29 (73.7 cm) 231/2 (59.7 cm) 487/8 (124.1 cm) 50 1/4 (127.6 cm) 301/8 (76.5 cm) Min
3
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(with cooktop combination installations)
Single Wall Ovens
1. Base must be capable of supporting 200 pounds
(90 kg).
2. Solid plywood or solid wood must be at least ½”
(1.3 cm) thick.
Double Wall Ovens
1. Base must be capable of supporting 375 pounds
(170 kg).
2. Solid plywood or solid wood must be at least ¾”
(1.9 cm) thick.
CARPENTRY and SUPPORT
Refer to Figure 1 or Figure 2 for the dimensions of your appliance and the cabinet cutouts and space needed
to t the oven.
The oven support or base surface must be solid plywood, solid wood, or a material veried to meet the
temperature and strength requirements needed for your installation. No berboard, laminated/coated wood or
other material should be used that is not veried to meet temperature and strength requirements.
All materials used in installation must withstand temperatures of 194 °F (90 °C).
The support surface must be level and at from side to side, and from front to rear.
If the cabinet does not have a solid oor or support surface, braces may be installed in the cabinet. Bracing
may also be used under the cabinet oor for added strength and support. Braces must run front to rear, meet
all material and temperature requirements, and be at and level. The bracing should be 2" (5 cm) minimum
width to support the oven side rails. Standard 2" x 4" (5 cm x 10 cm) studs are recommended.
Figure 3
Wall Oven Braces


Product specificaties

Merk: Frigidaire
Categorie: Oven
Model: FCWD302LAF

Heb je hulp nodig?

Als je hulp nodig hebt met Frigidaire FCWD302LAF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oven Frigidaire

Handleiding Oven

Nieuwste handleidingen voor Oven