Freedom Berto Handleiding

Bekijk gratis de handleiding van Freedom Berto (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Freedom Berto of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Specifications:

230-240V AC 50Hz

IP20-Indoor Use only

E27 MAX 40W

E27 Max.10W (bulb not included)

Class II protection

Page 1 of 1

www.freedom.com.au

www.freedomfurniture.co.nz

BERTO TABLE LAMP

Thank you for purchasing the Before you begin to assemble your new lamp,Berto Table Lamp.

please check to ensure that all hardware and parts have been supplied. This page lists all contents

included in the carton(s).

Follow instructions closely as deviation from them may present a possible safety risk and may

void your warranty.

It is recommended that assembly is done on a so surface such as carpet to avoid any damage. If

you experience any problems with your new purchase please phone Freedom Customer

Service(FCS) on 1300 135 588 (Australia) or 0800 469 327 (New Zealand)

Care Information:

Periodically check and re-tighten all fasteners.Wipe down surfaces using a clean cloth weekly.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced

by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

Ensure screws are fastened firmly as small parts may present a choking hazard.

Replacing the bulb:

Disconnect the plug from the electrical supply and allow the bulb and lamp to cool down,

Replace the bulb with an Incan or .E27 MAX 40WE27 MAX 10W LED

Re-connect the supply and turn on.

24302098

LED

Product specificaties