Foscam SD4H Handleiding

Foscam Bewakingscamera SD4H

Lees hieronder de 📖 handleiding in het Nederlandse voor Foscam SD4H (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
2 Physical Description
V1.0
305503000884
Quick Setup Guide
Wi-Fi PTZ IP Camera
Package Contents
Setting Up Your Foscam
Security Camera
1
Getting Started
LAN
Power
Lens
Laser IR LEDs Laser IR LEDs
Antenna
Microphone
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please
visit .foscam.com/downloads
3
Setting Up Your Camera:
Connection via the Foscam App
(Recommended)
1. Please tighten the antenna clockwise and make sure it is in a
vertical position.
Wi-Fi
Connection
Tighten
clockwise
Power Adapter
IP Camera Wi-Fi Antenna
Quick Setup Guide
Ethernet Cable
Screwdriver
Waterproof Lid
Expansion Screws
Security Tips
Please change the camera's password regularly, using a
combination of numbers, letters and special characters.
We recommend that you regularly update your camera with
the latest available software and rmware to ensure the best
experience with your camera.
The cords on this product are
a potential strangulation
hazard. For child safety,
please keep these cords out
of the reach of children.
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
iOS: version 11 or higher.
Android: 5.0 or higher, using a device with a Graphics
Processing Unit (GPU).
Note: For the best experience, please update the APP to the latest
version!
To ensure a smoother video experience on your smart phone, it is
recommended that your smart phone meet the following
specications:
Light Sensor
Reset
Infrared LED
Speaker
2. Plug the power adapter into the camera, and please wait for a
few seconds until hearing the “Ready for WiFi conguration”
Reset Button
Mod el: XXX
FCC ID:XXXX X
IC:12558A-XX
S/N:FIAI1403000001
UID :XXXXXX XXXXX
FHD Wire les s IP Came ra
Scan QR Code
Mod el: XXX
FCC I D:XXXXX
IC:12558A-XX
S/N:FIAI 1403000001
UI D:XXXXXXXXXXX
FH D Wi re le s s I P C am e ra
4
Please scan the QR code located
on your device：
Scan QR Code
Mo d el: XXX
FCC ID:XXXXX
IC:12558A-XX
S / N: F IAI1403000001
UID: XXXXXXXXXXX
FHD Wireless IP C amera
Please scan the QR code located
on your device：
3. Make sure that your smart phone is connected to your WiFi
router.
WiFi
2.4 GHz Wi-Fi or
5 GHz Wi-Fi
WLAN
WLAN
xxxxx_2.4G
xxxxx_5G
Settings
MY NETW ORKS
4. Open the foscam APP and please register a Foscam account, or
sign in if you have one already.
Email address
Password
Sign Up
Forgot Password
Sign In
Accept Privacy Notices and Terms of Seer vice
5. Follow the steps below:
Tap to add a device
Add Device
<
Scan the QR code
Search in L
Manually add
My Device
13
6
Wi-Fi configuration
Keep the device and mobile
phone close tothe router.
XXXXX_5G
WiFi Password
Conrm
Please do not exit this app or
turn off the device during this
process(requires approximately
2 minutes to complete)
Add Camera
<
20%
10
For WiFi configuration, please point the
QR code to the camera directly.
WiFi connection
<
I have heard the voice prompt
“WiFi connecting”
Next
9
Add Camera
<
7
The best distance is:
6~12inches (15~30cm）
Configure WiFi connecton
For Wi-Fi configuration,
please pion the QR code
to the device dirctly.
10~15cm
3.94~5.9in
90°
Save
Set name
Garden
Room
D
Please set the device name:
Doorway Corridor
G age
Kitchen
Balcony Bed Room
Garden
Save the body QR code
Save t he device‘s QR c ode to the mobile sy stem album
to help y ou re-add the device more conveniently
11
8
Tips: Please place the
QR code on the phone
screen about 10 to
15cm (3.94 to 5.9in)
away, and if you
encounter diculties
you can try to move the
screen slowly around
10 – 15cm (3.94 - 5.9in).
Next
Add Device
5
Power the device on until
the device voice prompts
"Hello foscam"
My Device
Foscam_camera
Camera Login
New camera username
Re-enter new camera
password
New camera password
Submit
13
12
Garden
Foscam_camera
14
Note: If the adding process fails, please reset your camera and
try adding again according to the above method.
Q uick S etup Gui de
Wi-Fi PT Z IP C ame ra
Add Cameras
Add NVR/NVR kits
Add Device
2
Micro SD
Card Slot
5 Hardware Installation
Fixate the camera on your preferred location and use the
provided screws to mount it.
Please Note:
Ensure that the rain or water will not reach the connector ports
at the end of the pig tail wiring. These connectors are not
weather-resistant.
4 PC Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins
and is compatible with Windows & Mac, supporting all Foscam
HD cameras and up to 36 cameras at the same time. If you would
like to manage multiple cameras, we suggest you install Foscam
VMS. You can download the “Foscam VMS ” Windows version
from , and can download the "Foscam VMS" foscam.com/vms
Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the
latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account
and login.
2. Tap the "+" icon on the Foscam VMS and follow the setup
wizard to add your camera.
Please visit foscam.com/downloads to view the user manual
and for additional detailed steps.
6 Important Notice
Camera Username & Password
The camera username & password are used to access and manage
your camera. Having a strong password can signicantly improve
the security of your camera.
If you have forgotten either of them, please press the "Reset"
button.
Press and hold the "Reset"
button for 3-5 seconds until
hearing "reset succeed".
Storage Media
Your camera supports cloud, NVR (Network Video Recorder), and
Micro SD card (supports FAT32 and exFAT format) storage formats.
cloud Storage NVR Micro SD card
(FAT32 & exFAT)
. 264
. 264
23
How to format Micro SD card, please follow the steps
below:
Scan the QR code below
to download the
“FoscamFormat ” Tool
4
Open the
“FoscamFormat ” Tool
5
FoscamFormat
foscam.com/downloads/app_software.html
1
Foscam Format ×
Choose the SD card:
Accept Terms of us
Terms of use
Format
2019 (c) Euport BV
F:\
∨
1
2
3
3
6
ALL data on disk: I: will
be erased, are you sure?
Conrm Cancel
Warning
7
9
Computer
Format ready
OK
Foscam Format
×
8
10 11
Safety Tips
Prohibit use at
high temperature
Keep away
from re
Not a
children's toy
Use the correct
power supply
Caution Electricity
Prohibit use at
low temperature
Keep away
from children
Keep dry Use the supplied
screw pack
FAQS Foscam APP
CE Certificate statement Website:
https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
https://www.foscam.com/company/open-information.html
www.foscam.com
Due to product upgrades and other reasons, this guide may be
slow to update, resulting in slight inconsistencies with the ocial
website information. Please take the ocial website
(www.foscam.com) information as the current standard.
Manufacturer: Shenzhen Foscam Intelligent Technology
Co., Ltd
Addr: Room 902,Building 1B, Shenzhen International
Innovation Valley, Xingke 1st Street, Nanshan District,
Shenzhen, Guangdong, China, 518055
Facebook
Reset Button
WLAN frequency range: 2412MHz - 2472MHz and
5725MHz - 5875MHz
Maximum transmission power: < 18.5dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz)
Power Supply: DC 12V 4.0A 48W
7 Product Performance
8 Troubleshooting
IP cameras is not powering on
If you nd your camera is not powering on, please the following:
1. Please check whether the outlet is working properly or not. Try
to plug the camera into a dierent outlet and see whether it
will work.
2. Please check whether the DC adapter is working or not. If you
have another 12V/4A power adapter which is working, please
try with another power adapter and see whether it will work.
3. If it still won’t work, please contact Foscam support.
1. Please connect the camera to your router with an ethernet
cable. If you can see the camera live video on the Foscam app,
please go to camera settings-->WiFi settings to choose the new
WiFi name and input WiFi password to set up. After the WiFi
settings is completed, please disconnect the ethernet cable
from the camera and wait for some seconds to connect to the
camera.
2. There is a need to reset the camera rst. Please refer to
https://www.foscam.com/faqs/view.html?id=13 to see the
reset steps.
Then please open the Foscam app to scan the QR-code of your
camera to set up the wireless connection for the camera. Please
make sure your cellphone is connected to that new WiFi.
How to re-congure the WiFi connection for Foscam
cameras after router changed?
support@foscam.com

Product specificaties

Merk: Foscam
Categorie: Bewakingscamera
Model: SD4H

Heb je hulp nodig?

Als je hulp nodig hebt met Foscam SD4H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Foscam

Foscam

Foscam SD4H Handleiding

12 Maart 2024
Foscam

Foscam C5M Handleiding

10 Januari 2024
Foscam

Foscam V5P Handleiding

18 Augustus 2023
Foscam

Foscam IPCAM02 Handleiding

4 Juli 2023
Foscam

Foscam D2EP Handleiding

15 Juni 2023
Foscam

Foscam V4EC Handleiding

1 Juni 2023
Foscam

Foscam X4 Handleiding

31 Mei 2023
Foscam

Foscam G2EP Handleiding

29 Mei 2023
Foscam

Foscam G4 Handleiding

23 Mei 2023
Foscam

Foscam FN7108E-B8-2T Handleiding

18 Mei 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Aqara

Aqara Camera Hub G2H Handleiding

28 April 2024
Iiquu

Iiquu Dummy Dome Camera Handleiding

28 April 2024
Sony

Sony SNC-VB640 Handleiding

26 April 2024
Sony

Sony SNC-EB642R Handleiding

26 April 2024
Sony

Sony SNC-VB642D Handleiding

26 April 2024
Sony

Sony SRG-HD1 Handleiding

26 April 2024
Sony

Sony SNC-ZM550 Handleiding

26 April 2024
Sony

Sony SNC-EM642R Handleiding

26 April 2024
Sony

Sony SNC-EM641 Handleiding

26 April 2024
Sony

Sony SNC-ZB550 Handleiding

26 April 2024