Foscam FHC790 Handleiding
Foscam
Beveiligingscamera
FHC790
Lees hieronder de đź“– handleiding in het Nederlandse voor Foscam FHC790 (2 pagina's) in de categorie Beveiligingscamera. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Foscam FHC790 Intelligent Security Camcorder Quick Start Guide
Overview
Congratulations on your purchase of the Foscam FHC790 intelligent security camcorder!
The Foscam FHC790 is an intelligent security camcorder with multiple triggering methods and multi
auto on/off modes. The camcorder comes with a built-in rechargeable battery which can
record up to 8 hours continuous video during typical use and standby for more than 3
months when vibration triggering is enabled. By plugging in the 5V DC adapter, it can achieve
192 hours of looped recording for surveillance use.*
* Actual life and performance may vary depending upon usage and settings; battery not replaceable.
Charging
The camcorder comes with an internal rechargeable battery. When using the camcorder for the
first time, or if you are using it after a long period of non-usage, remember to fully charge the battery
for at least 4 hours and resync the time by using the widget (see section “PC Software
Widget”). You can charge your camcorder using the USB port of your computer, the DC adapter, or
using a car adapter.
To charge the battery through USB port, connect the USB cable to the USB port of the
computer and the camcorder. For details, please see the status below. The camcorder will
function as a mass storage device, you will not be able to record video at this moment.
To charge the battery through a DC adapter or car adapter, connect the DC adapter or car
adapter to the camcorder. For details, please see the Status section below. Moreover, you will also be
able to record video while charging, depending on the mode you set.
Features
Circular recording – Also known as “loop recording”. Overwrites recordings once memory card is full.
Time stamp – Inserts a time stamp onto the video.
Vibration-trigger recording – Select this to record only when vibration is detected.
Motion-trigger recording – Select this to record only when motion is detected.
Voice-trigger recording – Select this to record only when voice/talk is detected.
Auto on/off mode – Select different auto on/off scenarios.
Selectable day/night mode – Select day mode or night mode to suit your environment.
Auto gapless split file – Splits files without gaps at every 10 / 15 / 30 minutes of recording.
Orientation – Use when the camcorder is turned upside-down.
Selectable resolution – Select a resolution of 640x480(VGA) or 320x240(QVGA) video and sound.
Frame rate adjustment – Adjust or lower the frame rate to save memory space.
Configurable video quality – high / medium / low
Support max 64GB microSD (TF) card (for better performance, use a card with class 4 or
above and format the card before usage. Check the following link for more information:
(http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml)
Recording
The power button is located on the right side of the camcorder. It can turn the camcorder on
or off.
Start Recording
Press and hold the Power button until the green LED is on (approximately 2 seconds), and
then release the button. When you see the green LED flashing, the camcorder is recording.
If you see otherwise, please read the Status section below.
Stop Recording
Press and hold the Power button until the green LED is off (for approximately 2 seconds).
WARNING: Turn off the camcorder before removing the card!
Minimum System Requirements
Windows 2000, XP, Vista, 7, 8, Mac OS X (mass storage class)
Windows Media Player 9
Intel Pentium class computer
USB 2.0 port for hi-speed transfers and charging
Status
Without DC adapter
Green LED on: camcorder is booted up
Red LED on: no card, card failed, battery low, or card is full (not in circular recording)
Green LED flashing: normal recording
Green / Red LED intermittent flashing: battery low and recording
DC adapter plugged in
Red LED flashing: charging
Red LED on: no card, card failed, or card full (not in circular recording)
Orange / Green LED intermittent flashing: charging and recording
Green LED flashing: charging complete and recording
All LEDs off: charging complete and not recording
Connected to computer
Orange LED on: charging
Green LED on: charging complete
Package Contents
Please unpack your intelligent security camcorder and check that the following were included:
Foscam FHC790 intelligent security camcorder
5V DC Adapter
5V Car Adapter
USB 2.0 Cable
Quick Start Guide
Foscam FHC790 at a Glance
LED indicator
on/off
camera
USB port
surveillance mode
custom mode
On-the-GO mode
microphone
card slot
www.foscam.us
Foscam FHC790 Intelligent Security Camcorder Quick Start Guide
Mode switch
Switch between surveillance, on-the-go and custom modes. Default settings are in parentheses.
Note: For custom mode configuration, please use the PC software Widget to change
the settings. The widget can be downloaded from www.foscam.us/pc-software-widget. To
make the custom mode settings effective, please push the mode switch to the “custom
mode” position before powering up the FHC790.
Surveillance
Video Quality
Resolution
Frame Rate
Indoor Lighting
Condition
Day / Night Mode
Orientation
Time Stamp
Circular Recording
Split File Time (min)
Mic
LED On / Off
Voice-Trigger
Sensitivity
Vibration-Trigger
Sensitivity
Vibration Standby Mode
Motion-Trigger
Sensitivity
Auto On / Off
High
320x240
High
50Hz
Day mode
Normal
Enable
Enable
30
Enable
On
Disable
Disable
N/A
Disable
Disable
On-the-GO
High
640x480
High
50Hz
Day mode
Normal
Enable
Disable
15
Enable
On
Disable
Disable
N/A
Medium
Disable
Custom (default)
(High) / Medium / Low
640x480 / (320x240)
(High) / Low
(50Hz) / 60Hz
(Day mode) / Night mode / Auto
switching
(Normal) / Up-side-down
(Enable) / Disable
(Enable) / Disable
10 / (15) / 30
(Enable) / Disable
(On) / Off
High / Medium / Low / (Disable)
High / Medium / (Low) / Disable
Fast Wake Up / (Power Saving)
High / Medium / Low / (Disable)
Scheduled Recording /
Car-activate Recording /
Car-stop Recording /
Car-activate and Car-stop Re-
cording /
(Disable)
PC Software Widget
To synchronize the time and customize settings, download the PC software “Widget” from
www.foscam.us/pc-software-widget and follow the instructions in the software guide.
NOTE: If the time shown is year 2026 or beyond due to a loss of Real Time Clock,
recording time will not be shown on the video, even if timestamp is enabled. Please use
the widget to resync the time and delete files created in 2026 or beyond!
Connecting to computer
To
1
2
3
connect the camcorder to your computer, follow these instructions:
Connect the larger end of the USB cable into an available USB port on the computer.
Connect the smaller end of the cable into the USB port of the camcorder.
The camcorder will appear in My Computer as a drive.
Firmware upgrades
Foscam will from time to time release new firmware for enhancements or adding new features.
Visit www.foscam.us/firmware to check on the latest firmware for your FHC790.
Environmental Requirements
Storage temperature: 32Ëš to 113ËšF (0Ëš to 45ËšC)
Operating temperature: 32Ëš to 113ËšF (0Ëš to 45ËšC)
FCC Regulation
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause interference to radio or television reception, which can be deter-
mined by turning the equipment off and then on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1 Increase the separation between the equipment and camcorder.
2 Connect the equipment to a different outlet so that the equipment and camcorder are
on different branch circuits.
3 Consult the dealer or an experienced radio / TV technician for help.
When the FHC790 is connected to the lighter through the 5V car adapter and the auto on /off mode is selected:
Car-activated Recording: Auto-starts recording once the car is started, auto-stops recording when car is stopped.
Car-stop Recording: Auto-starts recording when car is stopped, auto-stops recording once car is started.
Car-activate and Car-stop Recording: Auto-starts recording once car is started and continues to record
even when the car is stopped. The camcorder needs to be turned off manually.
* For the longest recording time, set Video Quality to Low, Resolution to 320x240 and Frame Rate to Low. This way
the FHC790 can act as a digital voice recorder.
** If a recording is started, you cannot switch between modes.
*** If triggering is enabled, the FHC790 will record for 10 seconds after powering-up. Then it will go into standby. If there
is a trigger, it will keep recording until there are no further triggers. After that, it will record for 5 more minutes and
then standby again.
www.foscam.us
version: 1.0
Product specificaties
| Merk: | Foscam |
| Categorie: | Beveiligingscamera |
| Model: | FHC790 |
Heb je hulp nodig?
Als je hulp nodig hebt met Foscam FHC790 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beveiligingscamera Foscam
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
27 Juli 2023
Handleiding Beveiligingscamera
- Beveiligingscamera Canon
- Beveiligingscamera Honeywell
- Beveiligingscamera JVC
- Beveiligingscamera Motorola
- Beveiligingscamera Topcom
- Beveiligingscamera Abus
- Beveiligingscamera Acti
- Beveiligingscamera Alecto
- Beveiligingscamera Apc
- Beveiligingscamera Apeman
- Beveiligingscamera ATN
- Beveiligingscamera Axis
- Beveiligingscamera Beseye
- Beveiligingscamera Brinno
- Beveiligingscamera D-Link
- Beveiligingscamera Dahua
- Beveiligingscamera EasyN
- Beveiligingscamera Elro
- Beveiligingscamera Eminent
- Beveiligingscamera Escam
- Beveiligingscamera Eufy
- Beveiligingscamera Ferguson
- Beveiligingscamera First Alert
- Beveiligingscamera Gembird
- Beveiligingscamera Gira
- Beveiligingscamera Hama
- Beveiligingscamera Hikvision
- Beveiligingscamera Humax
- Beveiligingscamera Iget
- Beveiligingscamera Kompernass
- Beveiligingscamera Lorex
- Beveiligingscamera Maginon
- Beveiligingscamera Mr Safe
- Beveiligingscamera Nedis
- Beveiligingscamera Netgear
- Beveiligingscamera Profile
- Beveiligingscamera SAB
- Beveiligingscamera Sinji
- Beveiligingscamera Smartwares
- Beveiligingscamera Somfy
- Beveiligingscamera Sricam
- Beveiligingscamera Storage Options
- Beveiligingscamera Swan
- Beveiligingscamera Swisstone
- Beveiligingscamera Targa
- Beveiligingscamera Tenda
- Beveiligingscamera Tenvis
- Beveiligingscamera TP Link
- Beveiligingscamera Trust
- Beveiligingscamera Ubiquiti
- Beveiligingscamera V-Tac
- Beveiligingscamera Vivotek
- Beveiligingscamera Yale
- Beveiligingscamera Jablocom
- Beveiligingscamera Overmax
- Beveiligingscamera Duramaxx
- Beveiligingscamera Nordval
Nieuwste handleidingen voor Beveiligingscamera
28 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023
7 Oktober 2023