FoneStar FA-8060 Handleiding

FoneStar Headset FA-8060

Bekijk gratis de handleiding van FoneStar FA-8060 (16 pagina’s), behorend tot de categorie Headset. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.8 sterren uit 15 reviews. Heb je een vraag over FoneStar FA-8060 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/16

INSTRUCTION MANUAL/MANUAL DE INSTRUCCIONES/

MODE D’EMPLOI/MANUAL DE INSTRUÇÕES

FA-8060

WIRELESS HEADPHONES

AURICULARES INALÁMBRICOS

CASQUES SANS FIL

AUSCULTADORES SEM FIOS

THIS MANUAL CORREPONDS TO THE FOLLOWING MODELS:

FA-8060 Wireless Hi-Fi stereo headphones via UHF radio frequency. Composed of a transmitter

( ) and wireless stereo Hi-Fi receiver headphones ( ). FA-8055T FA-8060R

FA-8055T FA-8060Transmitter by UHF radio frequency. For the extension or replacement of .

FA-8060R FA-8060Wireless headphones UHF. For the extension or replacement of sets .

DESCRIPTION

Wireless headphones via UHF radio frequency. The model is characterized by the headphonesFA-8060

ﬁtting ﬁrmly on the head allowing freedom of movement.

The transmitter is equipped with an audio stereo input and 3 selectable transmission channelsFA-8055T

(863.5, 864 and 864.5 MHz).

They allow total mobility and comfort, with maximum transmission distance in favourable conditions.

Several wireless Hi-Fi stereo headphones can be used ( ) with the same transmitter (FA-8060R FA-8055T)

and up to 3 transmitters ( ) simultaneously (one in each transmission channel). FA-8055T

CONTROLS AND FUNCTIONS

TRANSMITTER (mod. ) FA-8055T

1.- LED audio level indicators. Show the audio signal level going into the transmitter coming from the audio

source.

2.- LED power indicator. It lights up automatically when an audio signal goes into the transmitter. It switches

off automatically after 3 minutes without receiving a signal.

3.- CH1/CH2/CH3: UHF radio frequency transmission channel switch. 3 available channels: 863.5, 864

and 864.5 MHz.

4.- AUDIO INPUT: stereo audio input, 3.5 mm jack stereo connector for connection to a CD player, Hi-Fi

system, etc.

5.- : 12 V DC power supply input, for the mains adapter provided.DC 12 V

- 2 -

HEADPHONE RECEIVER (mod. ) FA-8060R

1.- LED power indicator. Remains lit if the headphones are in use.

2.- : headphone on/off switch. ON/OFF

3.- Battery compartment, uses two alkaline or rechargeable 1.5 V batteries type LR03-AAA. When inserting

the batteries, make sure that the polarity is correct.

4.- LED signal reception indicator: it lights up when a signal is received coming from the transmitter.

5.- : press this button to automatically tune the transmission channel. TUNE

6.- : .volume control. Increases or decreases the audio level. VOL

7.- Audio input, 3.5 mm stereo jack connector to use as wired headphone.

CONNECTION

- Connect the audio source stereo audio output signal to the transmitter’s AUDIO INPUT with the

corresponding cable.

- Power the transmitter with the mains adapter provided.

- Insert two alkaline or rechargeable 1.5 V batteries type LR03-AAA in the Hi-Fi stereo headphone receiver,

making sure that the polarity is correct.

INSTRUCTIONS FOR USE

1.- Make the transmitter connections according to the Connection section.

2.- The transmitter will switch on automatically when the audio signal is received, activating the LED power

indicator

Note: if it does not receive an audio signal, the transmitter will automatically switch itself off after 3

minutes

3.- Switch on the headphone receiver by placing the power switch in the ON position. The headphone LED

power indicator will light up.

4.- Press the TUNE button to automatically tune the transmission channel.

5.- In the event that no clear or strong signal is received or a signal with interference is received, change the

transmission channel with the transmitter’s CH1/CH2/CH3 switch. Then repeat step 4 to tune the new

transmission channel.

6.- Adjust the volume of the signal received until an adecuate level is reached using the headphone VOL

control.

- 3 -

Product specificaties

Merk:	FoneStar
Categorie:	Headset
Model:	FA-8060
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Bluetooth:	Nee
Connectiviteitstechnologie:	Draadloos
Frequentieband:	86.35, 86.4, 86.45 GHz
Meegeleverde kabels:	Audio (3,5 mm)
Accu/Batterij voltage:	1.5 V
Ondersteund aantal accu's/batterijen:	2
Volumeregeling:	Draaiknop
Aantal:	1
Draagwijze:	Hoofdband
Headset type:	Stereofonisch
Impedantie:	- Ohm
Positie speakers koptelefoon:	Circumaural
Frequentiebereik koptelefoon:	30 - 20000 Hz
3,5mm-connector:	Ja
Aansluitbereik:	100 m
Microfoontype:	Niet beschikbaar
Accu gestuurd:	Ja
USB-aansluiting:	Nee
Maximum input vermogen:	10 mW
Oplaadbron:	DC
Bedieningstoetsen:	Multi-key, Play/pause, Volume +, Volume -
Akoestisch systeem:	Gesloten
Type regeleenheid:	Externe regeleenheid
Meegeleverde ontvanger:	Ja
Type product:	Headset
Type batterij:	AAA
RF-connectiviteit:	Ja