Focal Solo6 Be 40th Handleiding

Focal Hifi systeem Solo6 Be 40th

Lees hieronder de 📖 handleiding in het Nederlandse voor Focal Solo6 Be 40th (28 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
SOLO6 BE - TWIN6 BE - SUB6
取扱説明書 /
Manuel d’utilisation / User Manual / Gebrauchsanleitung/
Manuale d’uso / Manual de uso / Manual de utilização /
Handleiding / Instrukcja obsługi / Руководство по
эксплуатации / 使 用 手 册 / 사용 설명서 /
FR EN
EN
The bolt of lightning in an equilateral triangle
warns the user that the device has high volt-
age that could result in a risk of electric shock.
Warning: To prevent any risk of electric shock,
do not remove the cover (or the back) from
the device. There are no user-serviceable
parts in this device. For maintenance or re-
pairs, contact a qualified professional.
The exclamation mark in an equilateral trian-
gle warns the user that the manual contains
important instructions on how to use and look
after the device.
1. Read these instructions.
2. Keep these instructions.
3. Heed all the warnings.
4. Follow all the instructions.
5. Risk of electric shock. Do not open.
Do not submerge your product in water or
expose them to humidity.
6. Only clean with a dry cloth.
7. Do not obstruct ventilation openings.
Follow the manufacturer’s instructions for
installing the device. Leave a distance of at
least 5 cm around the product for proper ven-
tilation.
8. Do not install the device close to a heat
source such as a radiator, cooker, heat vents
or any other appliance (including amplifiers)
that gives out heat.
9. Follow the safety instructions for the
power supply cord. This product is a device
belonging to Class 1. Only plug in the device
using the mains plug provided, which incor-
porates an earth connection. The device must
be plugged into an earthed mains socket.
10. Make sure the power cable can’t be trod-
den on, crushed or pinched. Take particular
care with the plug and the cable connection
to the device.
11. Only use accessories recommended by
the manufacturer.
12. Only use handling equipment, stands, tri-
pods, mounts or tables recommended by the
manufacturer or sold with the device.
If using a trolley, take extra care when moving
the trolley and device together, to prevent the
device from falling o and causing injury.
13. Unplug the device during storms or long
periods when it is not in use.
1 -4. All maintenance tasks should be per
formed by a qualified professional. Mainte-
nance is required in case of any kind of dam-
age to the device (damaged cable or plug,
spillages or objects inserted into the device,
exposure to rain or humidity, if the device mal-
functions or overturns, etc.).
15. The product should only be connected to
the mains power type shown on the label on
the device. If you’re not sure what type of mains
electrical supply you have, ask your retailer or
your electricity supplier. For devices intended
for use with a battery or another power source,
see the user manual.
16. Do not use this device in tropical climates.
17. Do not use this device at altitudes of more
than 2,000 m.
18. Do not overload wall sockets, extension
leads or multiple socket outlets as this could
cause fire or electric shock.
19. Do not insert any objects into the device’s
ventilation openings. They could come into
contact with one of the high-voltage compo-
nents or short-circuit them and cause a fire or
electric shock. Do not spill liquid on the device.
20. Do not attempt to repair this device your-
self. Opening it may expose you to hazardous
voltages or to other risks. Contact a qualified
professional for all maintenance work.
21. When replacement components are
needed, make sure that the maintenance
technician uses the components recommend-
ed by the manufacturer or components with
the same technical features as the original
product. Using non-compliant components
could cause fires, electric shocks or other
risks.
22. After any maintenance or repair work on
the device, ask the maintenance technician to
test it to check that it works safely.
23. The appliance should only be mounted
on a wall or ceiling if the manufacturer allows
for this.
24. The On/O switch on the back of the de-
vice cuts o the mains power supply to the
device. The user should be able to access it at
all times.
25. To avoid damaging your hearing, do not
listen to loudspeakers at high volumes for
long periods of time.
Listening to speakers at high volumes can
cause damage to the user’s ears and may lead
to hearing problems (temporary or perma-
nent deafness, buzzing in the ears, tinnitus,
hyperacusis).
Exposure to excessive volumes (over 85dB)
for more than one hour can cause irreparable
damage to your hearing.
USA:
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. However,
there is no guarantee that interference will not occur in a particular installation.
Canada:
Industry Canada Statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause un-
desired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit ac-
cepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonc-
tionnement indésirable.
(CEI 60417-6044)
An example of this equipment has been tested and found to comply with the following European directives and international standards:
Electromagnetic compatibility
EN 55103
EN 61000
Electrical safety
EN 60065
READ FIRST !
IMPORTANT SAFETY INSTRUCTIONS !
English

Product specificaties

Merk: Focal
Categorie: Hifi systeem
Model: Solo6 Be 40th

Heb je hulp nodig?

Als je hulp nodig hebt met Focal Solo6 Be 40th stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem Focal

Focal

Focal Symmetric FPS 4.160 Handleiding

8 Juli 2023
Focal

Focal Solo6 Be 40th Handleiding

7 Juli 2023
Focal

Focal Profile 908 DB Handleiding

6 Juli 2023
Focal

Focal Profile CC 908 DB Handleiding

1 Juli 2023
Focal

Focal Profile 918 DB Handleiding

1 Juli 2023
Focal

Focal VW Y-ISO Harness Handleiding

29 Juni 2023
Focal

Focal Symmetric FPS 1.500 Handleiding

28 Juni 2023
Focal

Focal Profile IW 908 Handleiding

26 Juni 2023
Focal

Focal Profile IC 908 Handleiding

26 Juni 2023
Focal

Focal Performance FPP 1000 Handleiding

25 Juni 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Philips

Philips DTM3170 Handleiding

30 April 2024
Philips

Philips MC-120 Handleiding

26 April 2024
Panasonic

Panasonic SC-AK630 Handleiding

22 April 2024
Philips

Philips FW-C355 Handleiding

15 April 2024
Sony

Sony DHC-MD373 Handleiding

15 April 2024
Philips

Philips BTB2570 Handleiding

15 April 2024
Thomson

Thomson DS121CD Handleiding

13 April 2024
Thomson

Thomson DS122CD Handleiding

13 April 2024
Panasonic

Panasonic RX-D15 Handleiding

11 April 2024
RCF

RCF NDX595 Handleiding

10 April 2024