Fluke 725Ex Handleiding

Fluke Kluis 725Ex

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 725Ex (66 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/66
725Ex
Multifunction Process Calibrator
Users Manual
January 2005 Rev. 3, 5/18
© 2005-2018 Fluke Corporation, All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is
three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only
to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product
which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by a f operation ccident or abnormal conditions o
or handling. Fluke warrants that software will operate substant unctional specifications for 90 dially in accordance with its f ays and that it has
been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to ex-
tend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized
sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of re-
pair/replacement parts when prod submitted for repair in another country. uct purchased in one country is
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective
product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the
product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk
for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that failure was caus r abnormal condition of operationed by neglect, misuse, contamination, alteration, accident, o or handling,
including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components,
Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be
returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping
Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or conse-
quential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held inva-
lid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of
any other provision.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
To register your product online, visit register.fluke.com
i
Table of Contents
Title Page
Introduction .................................................................................................................... 1
Contact Fluke ................................................................................................................. 1
Standard Equipment ....................................................................................................... 3
Safety Information .......................................................................................................... 3
Ex Hazardous Areas ...................................................................................................... 3
Faults and Damage ................................................................................................... 9
Faults and Damage ................................................................................................... 9
Safety Regulations .................................................................................................... 9
Certification Information ............................................................................................. 10
Getting Acquainted with the Calibrator ........................................................................... 10
Input and Output Terminals ....................................................................................... 10
Keys .......................................................................................................................... 12
Display ....................................................................................................................... 15
Getting Started ............................................................................................................... 16
Shut Down Mode ............................................................................................................ 16
Contrast Adjustment ....................................................................................................... 18
Using Measure Mode ..................................................................................................... 19
Measuring Electrical Parameters (Upper Display) ..................................................... 19


Product specificaties

Merk: Fluke
Categorie: Kluis
Model: 725Ex

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke 725Ex stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Fluke

Handleiding Kluis

Nieuwste handleidingen voor Kluis