Fluke 707Ex Handleiding

Fluke Meetapparatuur 707Ex

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 707Ex (22 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22

707Ex

mA Calibrator

Users Manual

March 2003 Rev. 4, 8/09 (English)

All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in ma period is terial and workmanship under normal use and service. The warranty

three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only

to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product

which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation

or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has

been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to ex-

tend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized

sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of re-

pair/replacement parts when product purchased in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective

product which is returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your ne en send the arest Fluke authorized service center to obtain return authorization information, th

product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk

for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke

determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling,

including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components,

Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be

returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping

Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-

PLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR

LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequen-

tial damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or

unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any

other provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

Table of Contents

Title Page

Introduction .................................................................................................................... 1

Battery Saver ................................................................................................................. 2

Safety Information .......................................................................................................... 2

WWarnings and Cautions ......................................................................................... 2

Safety Advice............................................................................................................. 3

Faults and Damage ................................................................................................... 3

Safety Regulations .................................................................................................... 4

Ex-Certification Data.................................................................................................. 4

Symbols ......................................................................................................................... 4

Front Panel Controls ...................................................................................................... 5

Using the mA Sourcing (Output) Modes......................................................................... 6

Changing the mA Output Span ...................................................................................... 6

Sourcing 6 mA...................................................................................................................

Simulating a Transmitter ................................................................................................ 7

Auto Ramping the mA Output ........................................................................................ 7

Using the SpanCheck Function ...................................................................................... 8

Measuring dc mA ........................................................................................................... 8

Measuring dc mA with Loop Power................................................................................ 9

Product specificaties

Merk:	Fluke
Categorie:	Meetapparatuur
Model:	707Ex
Soort bediening:	Knoppen
Gewicht:	224 g
Breedte:	70 mm
Diepte:	41 mm
Hoogte:	152 mm
Gebruikershandleiding:	Ja
Accu/Batterij voltage:	9 V
Temperatuur bij opslag:	-40 - 60 °C
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Batterijtechnologie:	Alkaline
Overspanningscontrole:	Ja
Automatische stap:	Ja
Lusspanning:	30 V
Spanningsmeetnauwkeurigheid:	0.015 procent
Spanningsmeetresolutie:	0.001 V
Krokodillenklem:	Ja
Inclusief holster:	Ja